• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.461-464
• /
• 2005

As the research on the development of the lightweight concrete block by the hydro-thermal synthetic reaction mixed with the calcareous material and bottom ash that is used less among siliceous material, we studied on the physical and chemical characteristics in the changes of hydro-thermal synthetic reaction of lightweight concrete block compounded with the PP fiber to increase flexural toughness and to prevent fragility failure. The results of the experiment are as follow. According to the increase of hydro-thermal synthetic reaction and the fiber content, compressive and flexural strength increased. Despite the changes of the hydro-thermal synthetic reaction time, tobermorite was produced on each of the specimens similarly. However, the phase of tobermorite was changed in accordance with the changes of time. Also, $CaCo_{3}$ appeared on the surface of the 9 hour hardened specimen.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.487-488
• /
• 2009

본 연구는 일반 포러스 콘크리트의 흡음 특성을 개선 하고자, 특수한 방법으로 섬유를 혼입 하는 방법을 개발 하는데 그 목적을 두었다. 가능한 한 섬유가 시멘트 페이스트 내에 함침 되지 않도록 하는 Fuzzy 형태의 포러스 콘크리트를 타설하여 흡음성능을 평가 하였다.

• 대한토목학회논문집
• /
• 제29권5A호
• /
• pp.543-550
• /
• 2009

본 연구에서는 재활용된 폴리에틸렌 테레프탈레이트(polyethylene terephthalate; PET)로 만든 플라스틱 단섬유의 구조재료로서의 사용 가능성을 조사하였다. 성능을 검증하기 위해서 가장 널리 상용되는 합성섬유인 폴리프로필렌(polypropylene; PP) 섬유와 비교하였으며, 섬유의 혼입률을 0%, 0.5%, 0.75%, 1.0%로 변화시켜 혼입률에 따른 영향을 함께 검토하였다. 실험으로는 압축강도, 쪼갬인장강도 등의 재료 특성과 재생 PET(recycled PET fibers; RPET) 섬유가 혼입된 RC 부재에서의 극한성능과 연성을 평가하기 위해 RC보의 휨 실험을 수행하였다. 실험결과, 압축강도는 섬유의 혼입량이 증가함에 따라 감소하였으나, 기존 PP섬유와 유사하였다. 반면 쪼갬인장강도는 약간 증가하는 경향을 보였다. 구조 부재에 적용하였을 경우에는 RPET을 혼입한 RC 보의 극한강도, 상대 연성비, 에너지 흡수능력이 OPC 시편에 비해 확연히 증가되는 것을 알 수 있었다. 극한 휨강도와 연성비가 증가하는 현상은 PP 섬유를 혼입한 콘크리트에서도 유사하게 나타났다. 따라서 RPET 섬유는 콘크리트 부재의 보강섬유로 유용하게 사용될 수 있을 것이다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.409-412
• /
• 2004

Over last decade extensive researches have been undertaken on the strength behaviour of Fiber Reinforced Concrete(FRC) structures. But the use of Ultra-High Strength Steel Fiber Cementitious Concrete Composites is in its infancy and there is a few experiments, analysis method and design criteria on the structural elements constructed with this new generation material which compressive strength is over 150 MPa and characteristic behaviour on the failure status is ductile. The objective of this paper is to investigate and analyze the behaviour of reinforced rectangular structural members constructed with ultra high performance cementitious composites (UHPCC). This material is known as reactive powder concrete (RPC) mixed with domestic materials and its compressive strength is over 150MP. The variables of test specimens were shear span ratio, reinforcement ratio and fiber quantity. Even if there were no shear stirrups in test specimens, most influential variable to determine the failure mode between shear and flexural action was proved to be shear span ratio. The characteristics of ultra high-strength concrete is basically brittle, but due to the steel fiber reinforcement behaviour of this structure member became ductile after the peak load. As a result of the test, the stress block of compressive zone could be defined. The proposed analytical calculation of internal force capacity based by plastic analysis gave a good prediction for the shear and flexural strength of specimens. The numerical verification of the finite element model which constitutive law developed for Mode I fracture of fiber reinforced concrete correctly captured the overall behaviour of the specimens tested.

• Steel and Composite Structures
• /
• 제45권1호
• /
• pp.147-157
• /
• 2022

This study assessed the compressive and tensile strengths and modulus of elasticity of waste polyethylene terephthalate (PET) using the ASTM standard tests. In addition, short carbon and glass fibers were mixed with waste PET to examine the improvements in ductility and strength during compression. The bonding was examined via field-emission scanning electron microscopy. The strength degradation of the waste PET tested under UV was 40-50%. However, it had a compressive strength of 32.37 MPa (equivalent to that of concrete), tensile strength of 31.83 MPa (approximately ten times that of concrete), and a unit weight of 12-13 kN/m3 (approximately half that of concrete). A finite element analysis showed that, compared with concrete, a waste PET pile foundation can support approximately 1.3 times greater loads. Mixing reinforcing fibers with waste PET further mitigated this, thereby extending ductility. Waste PET holds excellent potential for use in foundation piles, especially while mitigating brittleness using short reinforcing fibers and avoiding UV degradation.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.609-617
• /
• 2003

The use of Shotcrete(Sprayed concrete) for the support of underground excavations was pioneered by the Civil engineering industry. Permanent shotcrete tunnel linings such as Single-shell, NMT(Norwegian Method of Tunnelling) have been constructed in many countries for reducing construction time and lowering construction costs instead of conventional in-situ concrete linings. Among essential technologies for successful application of Permanent Shotcrete Linings, high performance shotcrete having high strength, high durability, better pumpability has to be developed in advance. This paper presents the ideas and the first field test results of wet-mixed Steel Fiber Reinforced Shotcrete(SFRS) with powder types cement mineral accelerator. From the results, wet-mix SFRS with powdered accelerator exhibited good early strength improvement and less rebound ratio compared to the ordinary accelerator.

• Computers and Concrete
• /
• 제30권3호
• /
• pp.165-173
• /
• 2022

The effect of basalt and polypropylene fibers on the flexural behavior of reinforced concrete (RC) beams is investigated in this paper. The compressive and tensile behaviors of the basalt concrete and polypropylene concrete cylinders are also investigated. Eight beams and 28 cylinders were made with different percentages of basalt and polypropylene fibers. The dosages of fiber were selected as 0.6%, 1.3%, and 2.5% of the total cement weight. Each type of fiber was mixed solely with the concrete mix. Basalt and polypropylene fibers are modern and cheap materials that can be used to improve the structural behavior of RC members. This research is designed to find the optimum percentage of basalt and polypropylene fibers for enhancing the flexural behavior of RC beams. Test results showed that the addition of basalt and polypropylene fibers in any dosage (0.6%, 1.3%, and 2.5%) can increase the flexural strength and displacement ductility index of the beams where the maximum enhancement was measured with 1.3% fibers. The maximum increments in the flexural strength and the displacement ductility index were 30.39% and 260% for the basalt fiber case, while the maximum improvement for the polypropylene fibers case was 55.5% and 230% compared to the control specimen. Finite element (FE) models were then developed in ABAQUS to predict the numerical behaviour of the tested beams. The FE models were able to predict the experimental behaviour with reasonable accuracy. This research confirms the efficiency of basalt and polypropylene fibers in enhancing the flexural behavior of RC beams, and it also suggests the optimum dosage of fibers.

• 한국농공학회논문집
• /
• 제55권1호
• /
• pp.1-8
• /
• 2013

This study will not only prove experimental dynamic properties which are classified to slump, compressive strength, tensile strength, flexure strength and toughness granite soil concrete with a fine aggregate of granite soil and blast-furnace cement and polypropylene fiber over 45 mm, but also establish a basic data in order to use environment-friendly pavement through prove useful pavement mixed with granite and polypropylene (PP) fiber which is a kind of material to prevent a dry shrinkage clack, a partial destruction and useful and light. The value of slump test was gradually increased by PP fiber volume 3 $kgf/m^3$, but compressive strength took a sudden turn for the worse from 5 $kgf/m^3$. The compressive strength indicated a range of 13.72~18.35 MPa. On the contrary to compressive strength, the tensile strength showed to decrease with rising PP fiber volume, and the tensile strength indicated a range of 1.43~1.64 MPa. The tensile strength was stronger about 2~15 % in case of mixing with PP fiber volume than normal concrete. The flexural strength indicated a range of 2.76~3.41 MPa. The flexural strength was stronger about 20 % in case of PP fiber volume 0 $kg/m^3$ than PP fiber volume 9 $kg/m^3$. The toughness indicated a range of 0~25.46 $N{\cdot}mm$ and increased proportionally with PP fiber volume. The toughness was stronger about 8.3 times in case of PP fiber volume 9 $kg/m^3$ than PP fiber volume 1 $kg/m^3$. The pavement with PP fiber volume over such a fixed quantity in the park roads and walkways can have a effect to prevent not only resistance against clack but also rip off failures.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권2호
• /
• pp.170-178
• /
• 2015

이 연구에서는 산업부산물인 알카리활성 슬래그와 알칼리 활성화제 (물유리, 수산화나트륨)에 강섬유를 사용하였으며, 이를 철근콘크리트 보에 적용하여 휨성능 평가를 하였다. 주요변수는 알칼리 활성화제의 혼입비율 및 강섬유를 혼입으로 총 8개의 실험체를 제작하였으며, 재료 및 구조성능 평가를 위한 실험을 수행한 결과 다음과 같은 결론을 얻었다. 친환경 알카리활성 슬래그 섬유보강콘크리트를 사용한 철근콘크리트 보는 전반적으로 휨 또는 휨-전단에 의하여 파괴되었다. 그리고 수산화나트륨의 몰 증가와 강섬유를 보강한 결과 최대내력이 15.8~25.9% 증가한 값이 나타났으며, 연성 또한 높게 나타났다. 친환경 알카리활성 슬래그 섬유보강콘크리트는 기존의 콘크리트를 대체할 수 있는 기초연구로서 향후 건설소재 및 재료분야에 활용할 수 있을 것으로 사료되며, 이러한 특성을 바탕으로 콘크리트 2차 제품 생산과 구조부재를 PC화하여 활용할 경우 생산성 향상, 공기단축 등 효율이 상승될 것으로 보인다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.9-10
• /
• 2010

본 연구에서는 CFRP로 보강한 2방향 콘크리트의 정하중 및 저속 충격하중에 대한 실험을 수행하였다. 압축강도 40MPa의 콘크리트 및 이와 동일한 배합에 0.75%의 강섬유를 혼입한 강섬유 보강 콘크리트로 $50{\times}350{\tims}350mm$의 부재를 제작하여 CFRP로 보강하였다. CFRP와 강섬유로 보강한 시험체는 콘크리트가 쪼개지는 파괴와 펀칭 파괴가 복합적으로 나타나고, 이 때 쪼갬 균열 수는 보강하지 않은 콘크리트에 비해 확연하게 줄어들었다. CFRP와 강섬유로 동시에 보강한 시편은 충격하중 하에서 2방향 콘크리트 시험체가 파괴되는 데에 6.8배의 에너지가 소모되었다.