• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.1050-1053
• /
• 2001

There is great interest in developing magnetoresistance(MR) sensor, using ferromagnetic, electrically non-magnetic conducting and antiferromagnetic films, especially for the use in weak magnetic fields. Here, we report single and Wheatstone-bridge type of MR sensors made in Si(001)/HiO(300$\AA$)/NiFe bilayers. Angular dependence of MR profiles was measured in Si(001)/NiO(300$\AA$)/NiFe(450$\AA$) films as a function of an angle between current and applied field direction, also, linearity was determined. AMR characteristics of single MR sensors was well explained with single domain model. Good linearity in 45$^{\circ}$Wheatstone-bridge type of MR sensors consisting of 4 single MR sensors made in Si(001)/NiO(300$\AA$)/NiFe(450$\AA$) was shown in the range of about $\pm$50 Oe.

• Journal of Magnetics
• /
• 제11권4호
• /
• pp.156-159
• /
• 2006

We have studied the magnetic properties of the CuNi nanoparticles for three different sizes prepared by plasma and chemical techniques. The magnetization is enormously enhanced with decreasing the nanoparticle size. This enhanced magnetic moment shows almost inversely linear temperature dependence, which could be interpreted by the Langevin-type superparamagnetism. The field dependence exhibits ferromagnetic-like behavior with weak hysteresis, which could described in terms of uncompensated spin and/or surface anisotropy. In addition, the magnetic data suggest that the CuNi nanoparticles produced by the plasma method result in significantly less oxidized metallic nanoparticles than those prepared by other techniques.

• Journal of Magnetics
• /
• 제20권4호
• /
• pp.460-465
• /
• 2015

The paper presents methodologies and results concerning one- and two-dimensional numerical modeling of radio frequency oscillations in a coaxial transmission line fed with a short pulse of electric current. The line is partially filled with a ferrite material, magnetized longitudinally close to saturation. The 2D model has permitted analyzing, for the first time in the art, the spatial structure and dynamics of the wave field within the radially non-uniform cross-section planes of the non-linear and dispersive guiding structure. This opens ways for optimizing size parameters of the line and the extent to which it is filled with the ferromagnetic material, thus increasing the line's electric strength and intensity of the r.f. oscillations.

• 한국전기전자재료학회논문지
• /
• 제29권5호
• /
• pp.289-293
• /
• 2016

The flux-lock type superconducting fault current limiter (SFCL) connects the two parallel windings in parallel with a ferromagnetic core. We suggest that the double quench flux-lock type SFCL should add a third winding. We analyzed characteristics of the fault current and the peak current using the quench of the high-Tc superconducting element. The proposed SFCL's inductances of a primary winding and the third winding were fixed and the amplitude of inductance of the secondary winding was changed. We found that the fault current can be more effectively controlled through the analysis of the equivalent circuit and the short-circuit tests.

• Journal of Magnetics
• /
• 제16권4호
• /
• pp.453-456
• /
• 2011

Demagnetization for a tube sample which was made of a galvanized steel sheet was performed by applying a magnetic field with a decrement to remove the remanent magnetization of the material. An orthogonal fluxgate magnetic field sensor was used to measure a magnetic field created from a ferromagnetic material. To evaluate the remanent magnetization, the measured magnetic fields were separated into two magnetic field components by the remnant magnetization and the induced one. The horizontal and the vertical bias fields should be controlled separately during demagnetization to remove the horizontal and the vertical components of the remanent magnetization of the tube sample.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 초전도 자성체 연구회
• /
• pp.105-107
• /
• 2003

강자성 형상기억합금은 기존의 압전재료 및 열적 형상기억합금을 이용한 전기-열-기계적 거동의 액츄에이터 재료를 대신할 수 있는 새로운 고성능 액츄에이터 재료로서 각광을 받고 있다. 그러한 강자성 형상기억합금들 중의 한 종류로서 단결정 및 다결정 $Ni_{2}MnGa$ 합금을 이용하여 자장인가시 변형을 관찰하였다. 거대 자장 유기 변형률을 설명하기 위하여 두 모델이 제안되었다. 변태 온도보다 낮은 온도에서는 마르텐사이트 상의 재배열에 의하여 변형이 일어났으며, 그 변태온도보다 높은 온도에서는 상변태에 의한 변형이 일어났다. 미세구조 관찰을 통하여 인가 자장의 방향에 따라 우선적으로 형성되는 마르텐사이트상을 관찰하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 초전도 자성체 연구회
• /
• pp.13-16
• /
• 2003

Magnetic and magneto-optical properties of Fe/Pt/Fe, Co/Pd/Co trilayers and also the sandwiches with wedge-shaped magnetic (Fe, Co) and nonmagnetic (Pt, Pd) layers were investigated. The oscillatory behavior of the saturation field $H_{s}$ of the studied trilayers with changing the thickness of the nonmagnetic layer (NML) $t_{NML}$ was revealed. That was explained by the exchange coupling between ferromagnetic layers (FML) through the nonmagnetic spacer. For the first time, oscillations of the transverse Kerr effect (TKE) with changing the Pt- and Pd-wedge thickness were discovered. Period of these oscillations was found to depend on the FML thickness and the photon energy of the incident light. TKE spectra of the examined samples were discovered to modify very strongly with increasing $t_{NML}$. The discovered peculiarities of magneto-optical properties of thin-film systems were explained by a concept of the spin-polarized quantum well states in the pt and Pd layers.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2002년도 동계연구발표회 논문개요집
• /
• pp.40-41
• /
• 2002

Synthesis of the ferroelectromagnetic material exhibiting ferromagnetism and ferroelectricity simultaneously has been an interesting subject due to not only for a possible application in electronic devices but also from the view point of solid state physics. In this study bulk ceramics and thin films of xBiFeO$_3$-yPrFeO$_3$-zPbTiO$_3$(x+y+z=1) and (1-w)BiFeO$_3$-wPbTiO$_3$ have been explored for finding ferroelectromagnetic material, in which ferroelectricity and ferromagnetism coexist simultaneously. (omitted)

• 동굴
• /
• 제78호
• /
• pp.9-15
• /
• 2007

The materials showing high structure dispersion with functional properties were developed on the quartz base and those were obtained by mechano-chemical reaction technology. Depending on the processing conditions and subsequent applications the materials produced by mechano-chemical reaction show concurrently magnetic, dielectric and electrical properties. The obtained magnetic-electrical powders classified by aggregate complex of their features as segnetomagnetics, containing a dielectric material as a carrying nucleus, particularly the quartz on that surface one or more layers of different compounds were synthesized having thickness up to 1050nm showing magnetic, electrical properties and others. The similarity of the structure of surface layers of quartz particles subjected to mechano-chemical processing and nano-structure cluspol (clusters in a polymer matrics) material was alsoconfirmed by the fact that the characteristics of ferromagnetic quartz of insulating nano-composite powder were changed with time, after its preparing process was completed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.555-558
• /
• 2000

Layered perovskite La$_{2-x}$Ca$_{l-x}$Mn$_2$O$_{7}$ phases were synthesized by solid state reaction. Single phase R-P could be obtained in the range of 0.4$_{2-x}$Ca$_{l-x}$Mn$_2$O$_{7}$. About 30% of MR ratio was obtained at 270K when 5 T of magnetic field was applied.ied.ied.ied.