• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.23-26
• /
• 2003

The BLT thin film and MgO buffer layer were fabricated using a metalorganic decomposition method and the DC sputtering technique. The MgO thin film was deposited as a buffer layer on $SiO_2/Si$ and BLT thin films were used as a ferroelectric layer. The electrical of the MFIS structure were investigated by varying the MgO layer thickness. TEM showsno interdiffusion and reaction that suppressed by using the MgO film as abuffer layer. The width of the memory window in the C-Y curves for the MFIS structure decreased with increasing thickness of the MgO layer Leakage current density decreased by about three orders of magnitude after using MgO buffer layer. The results show that the BLT and MgO-based MFIS structure is suitable for non-volatile memory FETs with large memory window.

• 한국결정학회지
• /
• 제5권2호
• /
• pp.85-92
• /
• 1994

펄스 레이저 증착법을 이용하여 강유전체 Bi4T13012 박막을 laA109(001) 위에 성장시켰다. 넓은 영역의 온도에서 증착한 박막의 상 형성과 구조적 성질을 X선 회절법을 이용하여 조사하였다. 740℃에서 증착한 박막은 박막의 c-축이 기판에 수직한 형태의 에피 성장의 경향을 보인다. 펄스 레이저 증착법을 이용하여 Bi4Ti3O12/YBa2Cu3O7-x/LaAlO3 복합구조를 in-situ 성장시켰다. Yba2Cu3O7-x의 a-, b-축이 LaAlO3와 완벽하게 평행하게 배열되어 있지 않음에도 불구하고, Bi4Ti3012 박막은 에피 성장의 경향을 보인다.

• 마이크로전자및패키징학회지
• /
• 제6권2호
• /
• pp.51-61
• /
• 1999

R.f. magnetron sputtering법에 의해 $SrBi_2Ta_2O_9$ 박막을 $Pt/SiO_2$/Si p-tyPp (100) 기판 위에 제조하였다. 제조된 박막을 $800^{\circ}C$에서 열처리한 후 증착 조건에 따라 미세구조와 전기적 특성을 측정하였다. $800^{\circ}C$에서 열처리된 박막은 (006), (111), (200) 및 이차상인 BiPt 피크가 XRD 분석 결과 나타났으며, 가스 압력의 감소와 기판 온도의 증가에 따라 결정입자는 성장하였다. 50mtorr, $100^{\circ}C$에서 증착 후 $800^{\circ}C$에서 열처리한 박막의 두께는 200nm이었다. 이 박막의 잔류분극과 항전계 값은 각각 20.07 $\mu$C/$\textrm {cm}^2$, 79kV/cm이었다.

• 한국진공학회지
• /
• 제19권1호
• /
• pp.52-57
• /
• 2010

$BiFeO_3(BFO)/Pb(Zr_{0.52}Ti_{0.48})O_3$(PZT) bilayer와 multilayer의 다층구조를 만들어 전기적 특성을 측정하여 같은 두께의 BFO 단층박막과 비교해 보았다. BFO와 PZT 용액을 이용하였으며 chemical solution deposition 방법으로 Pt/Ti/$SiO_2$/Si(100) 기판위에 각 박막을 증착하였다. X-ray diffraction 분석을 통해 모든 박막이 다배향(multi-orientation) 페로브스카이트 (perovskite) 구조를 가졌음을 확인하였다. BFO/PZT Bilayer와 multilayer 박막들은 BFO 단층박막의 비해 누설전류 값이 500 kV/cm에서 약 4, 5차수 정도 감소했으며, 이로 인해 BFO/PZT 다층박막의 강유전체 특성이 크게 향상되었다. BFO/PZT multilayer 다층구조 박막의 경우 안정된 이력곡선(hysteresis loop)을 나타냈으며, 잔류 분극(remanent polarization)의 값은 $44.3{\mu}C/cm^2$이었으며, 항전계($2E_c$) 값은 681.4 kV/cm였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.189.1-189.1
• /
• 2014

Lead zirconium titanate (PZT) is usually used as bulk and thin films. Due to high flexibility and piezoelectric, ferroelectric and pyroelectric properties, PZT fiber has attracted in a variety of fields such as sensor devices, non-electromechanical systems and non-volatile ferroelectric memory devices. And PZT fiber can be numerously synthesized and almost with the diameter of PZT fiber thicker than $10{\mu}m$. However, the electrospinnig method is cost effective and convenient. PZT obtained by electrospinning methodhas the diameter from sub-micro to nanometer. In this paper, the PZT/PVP nanofibers were synthesized with three precursors, lead nitrate, zirconium ethoxide and titanium isopropoxide. And the PZT nanofibers were fabricated after removal of PVP by annealing process at various temperature. The obtained PZT nanofibers were characterized by means of X-ray photoelectron spectroscopy (XPS) for chemical properties, X-ray diffraction (XRD) for crystallinity and phase, scanning electron microscopy (SEM) for morphologies. The diameter of PZT nanofibers were measured with SEM. From the SEM images, we confirmed that diameter of PZT nanofibers was hundreds of nanometers and decreased with increasing the annealing temperature. When the annealing temperature increased, the crystallinity of PZT nanofibers changed from pyrochlore to perovskite structure.

• 한국전기전자재료학회논문지
• /
• 제18권6호
• /
• pp.532-537
• /
• 2005

In order to develop a tunable resonator which can be easily operated by DC bias and applied for microwave tunable filters and devices using ferroelectric thin or thick films, the non conductor backed-and conductor backed- coplanar stripline resonators have been designed and analyzed. They have been designed to be operated at 25 GHz which involve coplanar stripline input and output ports. The resonators have been simulated and analyzed using Ansoft HFSS. The research has been focused on the Quality factor of the coplanar stripline resonator. The conductor Q, box Q, and radiation Q of the resonators have been analyzed and calculated according to the substrate thickness & conductor width of the resonators. From these parameters, the loss factors of the coplanar stripline resonator have been investigated. The conducting Q of the coplanar stripline resonator has no relation with the thickness of dielectric substrate and increases as the conductor width increases. The box Q has no much relation with the thickness of substrate and the conductor width, which is above 2000. The radiation loss increases as the thickness of substrate and the conductor width increase. To decrease the radiation loss of the coplanar stripline resonator, a conductor backed coplanar stripline resonator has been proposed which has the unloaded Q of 170.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.63-66
• /
• 1998

Prototype MFSFET′s using ferroelectric oxide LiNbO$_3$ as a gate insulator have been successfully fabricated with the help of 2 sheets of metal masks and demonstrated nonvolatile memory operations of the MFSFET′s. The estimated field-effect electron mobility and transconductance on a linear region of the fabricated FET were 600 $\textrm{cm}^2$/V.s and 0.16 mS/mm, respectively. The drain current of the "on" state was more than 4 orders of magnitude larger than the "off" state current at the same "read" gate voltage of 0.5 V, which means the memory operation of the MFSFET. A write voltage as low as $\pm$3 V, which is applicable to low power integrate circuits, was used for polarization reversal.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 춘계 기술심포지움 논문집
• /
• pp.173-176
• /
• 2002

B $i_{3.3}$L $a_{0.7}$ $Ti_{3}$ $O_{12}$(BLT) 강유전체 박막을 Pt/Ti/ $SiO_2$/Si 기판위에 졸-겔법 (sol-gel method) 으로 스핀코팅하여 Metal-Ferroelectric-Metal(MFM) 구조의 커패시터를 형성하였다. BLT 박막의 결정성은 후속열처리 온도가 증가할수록 향상되었으며 $R_{근}$값은 as~coated된 BLT 박막의 경우 3.8$\AA$를 나타내었으나 열처리 온도를 $700^{\circ}C$로 증가한 경우 12.9$\AA$으로 거칠은 표면형상으로 변화되었다. $650^{\circ}C$로 열처리된 BLT 박막의 잔류분극 2Pr ($\pm$($P^{*}$ -$P^{ ^}$))값은 5V 인가전압에서 약 29.1 $\mu$C/$cm^2$을 나타내었다. 또한 $10^{10}$ 스위칭 cycles 가지 분극 스위칭을 반복한 후에도 뚜렷한 잔류분극의 변화를 발견할 수 없어서 우수한 피로특성을 나타내었다. 3V 전압에서 BLT 박막의 누설전류는 약 2.2$\times$$10^{-8}$ A/$cm^2$를 나타내었다.내었다.었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.743-746
• /
• 2000

Metal-ferroelectric-insulator-semiconductor(MFIS) devices using Pt/$LiNbO_3$/Si structure were successfully fabricated. The dielectric constant of the AIN film calculated from the capacitance in the accumulation region in the capacitance-voltage(C-V) curve was about 8.2. The gate leakage current density of MIS devices using a aluminum electrode showed the least value of 1$\times$$1O^{-8}$A/$cm^2$ order at the electric field of 500kV/cm. The dielectric constant of $LiNbO_3$film on AIN/Si structure was about 23 derived from 1MHz capacitance-voltage (C-V) measurement and the resistivity of the film at the field of 500kV/cm was about 5.6$\times$ $1O^{13}$ $\Omega$.cm.

• 한국표면공학회지
• /
• 제55권5호
• /
• pp.247-260
• /
• 2022

Since the first report on ferroelectricity in Si-doped hafnia (HfO2), this emerging ferroelectrics have been considered promising for the next-generation semiconductor devices with their characteristic nonvolatile data storage. The robust ferroelectricity in the sub-10-nm thickness regime has been proven by numerous research groups. However, extending their scalability below the 5 nm thickness with low temperature processes compatible with the back-end-of-line technology. In this review, therefore, the current status, technical issues, and their potential solutions of atomic layer deposition (ALD) of HfO₂-based ferroelectrics are comprehensively reviewed. Several technical issues in the physical scaling of the ferroelectric thin films and potential solutions including advanced ALD techniques including discrete feeding ALD, atomic layer etching, and area selective ALD are introduced.