• 센서학회지
• /
• 제11권1호
• /
• pp.48-53
• /
• 2002

강유전 물질인 $Pb_{0.99}[(Zr_{0.6}Sn_{0.4})_{1-x}Ti_x]_{0.98}Nb_{0.02}O_3$(PNZST) 박막을 10 mole%의 과잉 PbO가 첨가된 타겟을 이용하여 $La_{0.5}Sr_{0.5}CoO_3$(LSCO)/Pt/Ti/$SiO_2$/Si 기판상에 RF 마그네트론 스퍼터링 방법으로 증착하였다. Ti의 조성비를 변화시키면서 증착된 박막에 대하여 그 결정성과 전기적 특성을 조사하였다. 80 W의 RF 전력, $500^{\circ}C$의 기판온도에서 증착한 후, $650^{\circ}C$, 공기중에서 10초 동안 급속 열처리된 박막이 가장 우수한 페로브스카이트상으로 결정화되었다. 또한. Ti의 조성비가 10 mole%를 가지는 PNZST이 가장 우수한 결정성과 강유전 특성을 나타내었다. 이러한 박막으로 제작된 PNZST 커패시터는 약 $20\;{\mu}C/cm^2$정도의 잔류분극과 약 50 kV/cm 정도의 항전계를 나타내었으며, $2.2{\times}10^9$의 스위칭 후에도 잔류분극의 감소는 10% 미만이었다.

• 한국전기전자재료학회논문지
• /
• 제17권1호
• /
• pp.7-15
• /
• 2004

The ferroelectric SBT thin films as a material of capacitors for non-volatile FRAMs have some problems that its remanent polarization value is relatively low and the crystallization temperature is quite high abovc 80$0^{\circ}C$. Therefore, in this paper, SBTN solution with S $r_{0.9}$B $i_{2.1}$T $a_{1.8}$N $b_{0.2}$$O_{9}$ composition was synthesized by sol-gel method. Sr(O $C_2$ $H_{5}$)$_2$, Bi(TMHD)$_3$, Ta(O $C_2$ $H_{5}$)$_{5}$and Nb(O $C_2$ $H_{5}$)$_{5}$ were used as precursors, which were dissolved in 2-methoxyethanol. SBTN thin films with 200 nm thickness were deposited on Pt/Ti $O_2$/ $SiO_2$/Si substrates by spin-coating. UV-irradiation in a power of 200 W for 10 min and rapid thermal annealing in a 5-Torr-oxygen ambient at 76$0^{\circ}C$ for 60 sec were used to promote crystallization. The films were well crystallized and fine-grained after annealing at $650^{\circ}C$ in oxygen ambient. The electrical characteristics of 2Pr=11.94 $\mu$C/$\textrm{cm}^2$, Ps＋/Pr＋=0.54 at the applied voltage of 5 V were obtained for a 200-nm-thick SBTN films. This results show that 2Pr values of the UV irradiated and rapid thermal annealed SBTN thin films at the applied voltage of 5 V were about 57% higher than those of no additional processed SBTN thin films. thin films.lms.s.s.

• 한국전기전자재료학회논문지
• /
• 제27권5호
• /
• pp.297-302
• /
• 2014

$La_{0.5}Sr_{0.5}CoO_3$ (LSCO) electrode thin films with a resistivity of ~ 1,600 ${\mu}{\Omega}cm$ were grown on c-$Al_2O_3$ (0001) substrate. $ZnSnO_3$ (ZTO) thin films with different thicknesses were directly grown on LSCO/c-$Al_2O_3$ (0001) substrates at a substrate temperature that ranged from 550 to $750^{\circ}C$ using Pulsed Laser Deposition (PLD). The secondary phase $Zn_2SnO_4$ occurred during the growth of ZTO films and it became more significant with further increasing substrate temperature. Polarization-electric-field (P-E) hysteresis characteristics, with a remnant polarization and coercive field of 0.05 ${\mu}C/cm^2$ and 48 kV/cm, respectively, were obtained in the ZTO film grown at $700^{\circ}C$ in 200 mTorr.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.12-12
• /
• 2008

Ruthenium is one of the noble metals having good thermal and chemical stability, low resistivity, and relatively high work function(4.71eV). Because of these good physical, chemical, and electrical properties, Ru thin films have been extensively studied for various applications in semiconductor devices such as gate electrode for FET, capacitor electrodes for dynamic random access memories(DRAMs) with high-k dielectrics such as $Ta_2O_5$ and (Ba,Sr)$TiO_3$, and capacitor electrode for ferroelectric random access memories(FRAMs) with Pb(Zr,Ti)$O_3$. Additionally, Ru thin films have been studied for copper(Cu) seed layers for Cu electrochemical plating(ECP) in metallization process because of its good adhesion to and immiscibility with Cu. We investigated Ru thin films by thermal ALD with various deposition parameters such as deposition temperature, oxygen flow rate, and source pulse time. Ru thin films were grown by ALD(Lucida D100, NCD Co.) using RuDi as precursor and $O_2$ gas as a reactant at 200~$350^{\circ}C$.

• 한국세라믹학회지
• /
• 제33권10호
• /
• pp.1101-1108
• /
• 1996

No-doped PZT thin films have been fabricated on Pt/Ti/SiO2/Si substrate using Sol-Gel technique. A fast annealing metho (three times of intermediate and final annealing) was used for the preparation of multi-coated 1800$\AA$ thick Nb-doped PZT thin films. As Nb doping percent was increased leakage current was lowered approximately 2 order but dielectic properties were degraded due to the appearance of pyrochlore phase and domain pinning. Futhermore the increase of the final annealing temperature up to 74$0^{\circ}C$lowered the pyrochlore phase content resulting in enhancing the dielectric properties of the Nb doped films. The 3%-Nb doped PZT thin films with 5% excess Pb showed a capacitance density of 24.04 fF/${\mu}{\textrm}{m}$2 a dielectric loss of 0.13 a switchable polarization of 15.84 $\mu$C/cm2 and a coercive field of 32.7 kV/cm respectively. The leakage current density of the film was as low as 1.47$\times$10-7 A/cm2 at the applied voltage of 1.5 V.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.352-355
• /
• 2003

[ $Bi_{3.25}La_{0.75}Ti_3O_{12}$ ] (BLT) thin films were prepared by using metal organic decomposition method onto the LaNiO3 (LNO) bottom electrode. Both the structure and morphology of the films were analyzed by x-ray diffraction (XRD) and atomic force microscope (AFM). Even at low temperatures ranging from 450 to $650^{\circ}C$, the BLT thin films were successfully deposited on LNO bottom electrode and exhibited (117) orientation. The BLT thin films annealed as low as $600^{\circ}C$ showed excellent ferroelectricity, higher remanent polarization and no significant degradation of switching charge at least up to $5{\times}10^9$ switching cycles at a frequency of 100 kHz and 5 V. For the annealing temperature of $600^{\circ}C$, the remanent polarization $P_r$ and coercive field were $23.5\;{\mu}C/cm^2$ and 120 kV/cm, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.183-186
• /
• 2004

The dry etch behavior of PZT thin films was investigated in $BCl_3/N_2$ plasma. The experiments were carried out with measuring etch rates and selectivities of PZT to $SiO_2$ as a function of gas concentration and input rf power, chamber pressure. The maximum etch rate was 126 nm/min when 30% $N_2$ was added to $BCl_3$ chemistry. Also, as input rf power increases, the etch rate of PZT thin films was increased. Langmuir probe measurement showed the noticeable influence of $BCl_3/N_2$ mixing ratio on electron temperature and electron density as input rf power increased. The variation of Cl radical density as plasma parameters changed was examined by Optical Emission Spectroscopy (OES) analysis. According to X-ray diffraction (XRD) analysis, PZT thin films were damaged in plasma and an increase in (100), (200) and (111) phases showed the improvement in structure of the PZT thin films after the $O_2$ annealing process.

• 한국전기전자재료학회논문지
• /
• 제19권7호
• /
• pp.667-672
• /
• 2006

Ferroelectric $Pb(Zr_{0.52}Ti_{0.48})O_3$ (PZT(52/48)) thick films were fabricated by the screen-Printing method on the alumina substrates, and $PbTiO_3$ (PT) Precursor solution, which prepared by sol-gel method, was spin-coated on the PZT(52/48) thick films to obtain a densification. Its structural and electrical properties of the PZT(52/48) thick films with the treatment of PT precursor solution coating were investigated. The particle size of the thick films was increased with increasing the number of coatings and the thickness of the PZT-6 (6: number of coatings) films was about $60{\mu}m$. The relative dielectric constant increased and the dielectric loss decreased with increasing the number of PT sol coatings. The relative dielectric constant and dielectric loss of the PZT-6 thick film were 475 and 2 %, respectively. The remanent polarization, coercive field and breakdown strength of the PZT-6 film were $32.6{\mu}C/cm^2$, 15 kV/cm and 60 kV/cm, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.271-274
• /
• 2003

[ $Sr_xBa_{1-x}Nb_2O_6$ ] (SBN, $0.25{\leq}x{\leq}0.75$) ceramic is a ferroelectric material with tetragonal tungsten bronze (TTB) type structure, which has a high pyroelectric coefficient and a nonlinear electro-optic coefficient value. In spite of its advantages, SBN has not been investigated well compared to other ferroelectric materials with perovskite structure. In this study, SBN thin film was manufactured by ion beam sputtering technique using the prepared SBN target in $Ar/O_2$ atmosphere. SBN30 thin films of different thickness were pre-deposited as a seed layer on $Pt(100)/TiO_2/SiO_2/Si$ substrate followed by SBN60 deposition up to $4500\;{\AA}$ in thickness. As-deposited SBN60/SBN30 layer was heat-treated at different temperatures of 650, 700, 750, and $800\;^{\circ}C$ in air, respectively, The crystallinity and orientation behavior as well as electric properties of SBN60/SBN30 multi-layer were examined. The deposited layer was uniform and the orientation was shown primarily along (001) plane from XRD pattern. There was difference in the crystal structure with heat-treatment temperature, and the electric properties depended on the heating temperature and the seed-layer thickness. In electric properties of Pt/SBN60/SBN30/Pt thin film capacitor prepared, the remnant polarization (2Pr) value was $15\;{\mu}C/cm^2$, the coercive field (Ec) 65 kV/cm, and the dielectric constant 1492, respectively.

• 한국세라믹학회지
• /
• 제39권9호
• /
• pp.829-834
• /
• 2002

$Er(NO_3)_3{\codt}5H_2O,\;Mn(CH_3CO_2)_2{\cdot}4H_2O$를 출발원료로 사용하여 졸-겔 법으로 Si(100) 기판 위에 코팅된 $ErMnO_3$ 박막의 강유전 특성에 관하여 연구하였다. $ErMnO_3$ 박막은 800$^{\circ}C$에서 결정화가 시작되었으며, (001)로 우선 배향된 $ErMnO_3$ 박막을 얻을 수 있었다. 본 실험에서 800$^{\circ}C$에서 1 h 열처리하여 얻은 $ErMnO_3$ 박막은 1∼100 KHz의 주파수 범위에서 유전 상수(k)는 26, 유전 손실(tan ${\delta}$)은 0.032의 값을 나타내었으며, 이때 $ErMnO_3$ 박막의 입자 크기는 10∼30 nm이었다. 강유전 특성은 (001) 배향성이 증가할수록 잔류 분극 값이 증가하였으며, 800$^{\circ}C$에서 1시간 열처리하여 $ErMnO_3$ 박막의 잔류 분극 값($P_r$)은 400 nC/$cm^2$를 나타내었다. 또한 열처리 시간이 증가할수록 치밀하고 균일한 박막을 얻어 낮은 항전계 ($E_c$) 값을 가졌다.