• 한국공간구조학회논문집
• /
• 제14권2호
• /
• pp.51-58
• /
• 2014

Meteorological observatories use measuring boards on even ground in open areas to measure the amount of snowfall. However, it is very difficult to evaluate the accurate amount of snowfall because of the effects of the wind. Therefore, this study tried to determine the internal wind flow inside a windbreak fence to identify an area that was not affected by wind in order to measure the snowfall. We performed a computational fluid dynamics analysis, wind tunnel test of the type and height of the windbreak fence, and analyzed the wind flow inside the fence. The results showed that a double windbreak fence was better than a single windbreak fence for reducing the wind velocity. The reduction of the wind velocity was highest in the middle of a windbreak fence with a width of 4 m and a height of 60cm, where the windbreak fences were fixed to the ground.

• 한국조경학회지
• /
• 제29권6호
• /
• pp.21-26
• /
• 2002

The propose of this study is to suggest objective data to be utilized for a plan and the improvement of open space through the analysis of people's behaviour and satisfaction after the introduction of an opened-fence around offices followed by a plan for wall-afforestation of public institution's. The sites examined are four offices; two of them have opened-walls and the others have traditional enclosure. Analysis of frequency is conducted to understand the actual use according to people's individual peculiarities. Pearson's correlation analysis, t-test, multiple regression analysis are carried out to find out relations of fluents. In the end, the satisfaction is high in public institution satisfaction, entrance, space perception. stability, Landscaped office with opened-fence rather than fence, and the increase in usage of fluent of public institution satisfaction, entrance, space perception. stability, confusion brings about rising of use-satisfaction. Satisfaction with the exterior of building is the most important variable that influences the whole urban open space. Furthermore the influences of the approach and stability having connection with open or not-open fence is major variable affecting satisfaction of use of open space. Whether open or not is important factor on satisfaction of open space of office building. Through this study, we can find that opened fence determines use satisfaction of resting space of outdoor-office. So factors affecting satisfaction must be regarded as important requisite on planning, design, development and management in plan for afforestation of fence at public institution.

• 한국ITS학회 논문지
• /
• 제8권3호
• /
• pp.131-138
• /
• 2009

본 연구의 목적은 CA(Cellular Automata)이론을 기반으로 행위자기반(agent-based) 보행시뮬레이션 모델을 개발하고, 개발된 모델을 보행시설 설치 실험에 적용하여보는 것이다. 이를 위하여 본 연구에서는 보행교통류에 CA이론이 적용된 모델을 검토하고, Fence라는 보행시설이 보행자의 통행속도에 미치는 영향을 분석하기 위해 실험을 계획하고 CA보행자 모델을 구축하였다. 구축된 CA보행자 모델은 초기화, 보행자 발생 유입, 측방이동, 전방이동의 하위모델로 구성되어 있다. 실험결과 Fence를 설치했을 때의 보행속도가 Fence를 설치하지 않았을 때의 보행속도보다 높게 나타나, 통행 방향이 다른 보행자가 혼재되어 있을 경우 Fence를 설치하지 않았을 때의 보행속도보다 높게 나타나, 통행 방향이 다른 보행자가 혼재되어 있을 경우 Fence를 설치하는 것이 효과적인 것으로 나타났다. 또한, Fence의 설치는 매우 혼잡한 상황에서보다 적당한 혼잡상태에서 더 큰 것으로 분석되었다.

• 대한의용생체공학회:의공학회지
• /
• 제28권6호
• /
• pp.791-797
• /
• 2007

This paper proposes a semiautomatic vertebra segmentation method that overcomes limitations of both manual segmentation requiring tedious user interactions and fully automatic segmentation that is sensitive to initial conditions. The proposed method extracts fence surfaces between vertebrae, and segments a vertebra using fence-limited region growing. A fence surface is generated by a deformable model utilizing valley information in a valley emphasized Gaussian image. Fence-limited region growing segments a vertebra using gray value homogeneity and fence surfaces acting as barriers. The proposed method has been applied to ten patient data sets, and produced promising results accurately and efficiently with minimal user interaction.

• 한국진공학회지
• /
• 제8권4A호
• /
• pp.476-481
• /
• 1999

Characteristics of platinum dry etching were investigated in a cryogenic magnetized inductively coupled plasma (MICP). The problem with platinum etching is the redeposition of sputtered platinum on the sidewall. Because of the redeposits on the sidewall, the etching of patterned platinum structure produces feature sizes that exceed the original dimension of the PR size and the etch profile has needle-like shape [1]. The main object of this study was to investigate a new process technology for fence-free Pt etching As bias voltage increased, the height of fence was reduced. In cryogenic etching, the height of fence was reduced to 20% at-$190^{\circ}C$ compared with that of room temperature, however the etch profile was not still fence-free. In Ar/$SF_6$ Plasma, fence-free Pt etching was possible. As the ratio of $SF_6$ gas flow is more than 14% of total gas flow, the etch profile had no fence. Chemical reaction seemed to take place in the etch process.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권11호
• /
• pp.531-535
• /
• 2002

Nowadays, the most serious problems in ac PDP are high cost and complex manufacturing processes. To solve these problems, fence electrode structure, which eliminates the need for expensive transparent electrodes, has been newly suggested. But it has a lower luminance and luminous efficiency than the conventional stripe type electrode structure. In this study, an improved fence electrode structure has been suggested in order to improve luminance and luminous efficiency. The experimental results show that the luminous efficiency of suggested structure is 25% higher than that of conventional fence electrodes.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.287-292
• /
• 2001

The objective of this study is to verify the secondary flow and the total pressure loss distribution in the boundary layer fence installed linear turbine cascade passage and to propose an appropriate height of the boundary layer fence which shows the best loss reduction among the simulated fences. In this study three different boundary layer fence was installed which have different height. This study was performed by numerical method and the result showed the boundary layer fence which has the height of one third of the inlet boundary layer thickness showed the best loss reduction rate.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.185-188
• /
• 2008

In this study, we experimentally investigated that the optimization of pulsating jet to reduce the separated flow region behind the vertical fence. The vertical fence was submerged in the turbulent boundary layer in the circulating water channel and we applied phase averaged PIV method to measure the instantaneous velocity fields around the fence. One cycle of pulsating jet is divided into 20 phases and grabbed total 200 instantaneous velocity fields at each phase. The experiments were performed by varying the frequency, maximum jet velocity and the shape of pulsating jet wave. Pulsating jet was precisely made by piston-type pump controlled by the computer. The obtained results were compared with normal fence flow. From this study, we found there is the specific frequency which is effective in reducing the reattachment region.

• 한국가시화정보학회지
• /
• 제8권1호
• /
• pp.13-18
• /
• 2010

An experimental investigation of the flow around a vertical fence was carried out using a PIV velocity field measurement technique. The vertical fence was embedded in a turbulent boundary layer. The instantaneous velocity fields measured at cross-sectional planes reveal complex longitudinal vortices that vary in size and strength, developing from the upstream location. In the instantaneous vorticity and velocity field data, the shear flow separated from the fence top is highly turbulent and shows unsteady flow characteristics. The topography of the ensemble averaged velocity fields, especially the separation bubble formed behind the fence, shows that the spatial distributions of streamwise velocity (U) and vertical (V) are symmetric, the spanwise velocity (W) is skew-symmetric with respect to the central xy-plane(z=0).

• 대한임베디드공학회논문지
• /
• 제14권1호
• /
• pp.43-49
• /
• 2019

Recently, the importance of industrial fieldbus has been highlighted since the emergence of Industry 4.0. In particular, the Ethernet-based fieldbus protocol is actively used in automation systems. This paper proposes a safety fence system based on EtherCAT, a type of Ethernet-based fieldbus, to measure external loads. In order to measure the external loads, a force sensor was connected to an EtherCAT slave that transmits the sensor data to an EtherCAT master in real-time. The master ultimately controls the angle of the safety fence when it detects danger based on the given data. In the future, more effiecient safety fence system will be developed by using a HMI system to communicate with the EtherCAT master to manage safety and by employing multiple sensors to increase the accuracy of the fence system.