• The Korean Journal of Malacology
• /
• v.32 no.2
• /
• pp.119-125
• /
• 2016

The present study aimed to understand the effects of a ${\beta}$-glucan-added abalone feed (Immuneglu$^{TM}$) on the immune parameters, survival rate, and anti-bacterial activity of the abalone Nordotis discus hannai. During the study, spat and adult abalones were fed 0, 0.1, and 1% of Immuneglu$^{TM}$ mixed with artificial feed for 2 weeks, and their immune parameters, survival rate, and anti-bacterial activity were measured. The results showed that abalones fed on Immuneglu$^{TM}$-added feed showed a higher phagocytic rate, survival rate, and anti-bacterial activity against Vibrio alginolyticus, than those with the control treatment. In addition, the nitric oxide concentration, which indicates an inflammatory response, increased in the treatment group. Our study suggests that Immuneglu$^{TM}$ might be a useful additive for increasing the immunity and survival rates of abalones during mass culture.

• Journal of Biosystems Engineering
• /
• v.43 no.3
• /
• pp.185-193
• /
• 2018

Purpose: The purpose of this study was to analyze the performance factors of a rotary impact-type thresher to develop a sesame and perilla thresher, specifically to analyze the cut length of the stems and the threshing rates based on the relationship between the blade velocity and feeding speed. Methods: The materials were dried within a range of 12.3-13.0% to test the impact cut by bending. The cut lengths of the perilla and sesame stems were categorized in 6 ranges (~7.0, 7.1-10.0, 10.1-13.0, 13.1-16.0, 16.1-20.0, 20.1- (cm)). For testing the cut length and threshing rate, the upward-rotating blade velocity was varied as 11.0 m/s, 13.5 m/s, and 22.3 m/s. Feeding speeds were changed from 0.1 m/s to 2.2 m/s by the inverter connected to the feed motor. The feed rate and threshing rates without cover-casing were evaluated with the factors of thresher testing. Results: The mean cut length of the stem decreased as the blade velocity increased and/or the feeding speed decreased. As the feed rate increased up to 17.5 g/s, the cut length distributions showed no significant difference. The threshing rate was 98.9% for sesame, and flexible according to the blade velocity and feeding speed of the perilla. Conclusion: Feeding material too fast could produce longer cut stem segments, therefore, a feeding speed less than 2.2 m/s is recommended. A blade velocity of 13.5 m/s is preferable for both sesame and perilla with regard to cut length and threshing rate.

• Journal of Aquaculture
• /
• v.12 no.1
• /
• pp.25-30
• /
• 1999

This study was carried out to produce the seedling of the larvae and juveniles of pale chup, Zacco platypus (Cyprinidae) in terms of artificial hatching, feeding behavior and growth rates. The total lengths of the newly hatched larvae were 7.6~8.2mm (mean: 7.97mm). The hatched larvae rose to the surface 3 days after hatching. The larvae were fed Daphnia, rotifer, Artemia and powdered feed. Hatching experiments were conducted in jar incubators under the different water temperature conditions, $20~32^{\circ}C$. The highest hatching rate was at $26^{\circ}C$ after 47 hours. Jar incubators was the highest hatching rate (89%), and cage and Californian incubators were useful and relatively high hatching rates (>89%). The size of the larvae 50 days after hatching were 30.0mm (25.6~32.0mm). As the water temperatures was increased, the growth rate of the larvae was also increased. Especially, the growth rates were favorable over $26^{\circ}C$, but survival was the worst at $32^{\circ}C$. This species was quick to accept assorted feed after hatching. The assorted feeds for flounder and rockfish better than that of carp in reference to growth rate.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.15-15
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.17-48
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.10
• /
• pp.1388-1393
• /
• 2000

The present study was conducted to examine the feasibility of utilising bamboo (Bambusa arundinacea) shoot shell (BSS) in ruminants. Chemical composition, rumen degradability and some antinutritional compounds were determined for fresh and boiled BSSs to evaluate its feed value and safety. Thirty-two Holstein heifers were allocated to four groups and used to investigate the response in growth rate to supplementing ammoniated rice straw with fresh shell (phase 1) or silage of boiled BSS (phase 2). All animals were offered ammoniated straw ad libitum with 1kg of cotton seed meal (phase 1) or 0.5 kg of cotton seed meal and 0.5 kg of concentrate mixture (phase 2) per head per day. The BSS was supplemented at levels of 0, 3, 6 or 9 kg/d (phase 1) and 0, 5, 10 or 15 kg/d (phase 2) (as fed basis). The BSS was very high in moisture content, and its contents of crude protein and neutral detergent fiber were 13~16% DM and 65~76% DM, respectively; boiling resulting in higher moisture and protein. No hydrocyanic acid was detected in both BSSs and content of tannins was negligible. Rumen degradability of BSS was reasonably high, and with boiling the rapidly degradable fraction decreased, and potentially degradable component increased. Silage of the boiled BSS was slightly lower in both rapidly and slowly degraded fractions than the fresh BSS. Animals consumed all supplemented BSSs without any adverse health problems. Intake of ammoniated straw decreased with the increasing levels of BSS, but total intake was higher in almost all supplementary groups than in the non-BSS. Heifers had a higher growth rate in phase 1 with fresh BSS than in phase 2 with ensiled shell, and daily weight gains were 622, 629, 744 or 690 g in phase 1, and 578, 575, 677 or 635 g in phase 2 at four BSS levels, respectively. For both phases growth rate was significantly higher for the animals in groups 3 and 4 than those in groups 1 and 2 (p<0.01), with little difference between groups 1 and 2 (p>0.05) but significant difference between groups 3 and 4 (p<0.05). Supplementation with BSS also resulted in an improved feed conversion rate, with the least concentrate consumption in group 3 for both phases. It is concluded that the BSS has a high potential nutritional value as indicated by its medium protein content, reasonably high rumen degradability, and that inclusion of BSS in ammoniated rice straw diet is not only safe to animals, but also may improve growth rate of ruminants and feed conversion rate. It may be disadvantageous to use high amounts of BSS in ammoniated straw diets.

• Membrane Journal
• /
• v.5 no.4
• /
• pp.137-144
• /
• 1995

This studies concern the separation of aqueous boric acid solution and same solution containing silica using cellulose acetate RO S/W 4040 module manufactured by Hydranautics Co. The operating conditions of the applied pressures, temperatures, and feed flow rate are also investigated to characterize the permeabilities, biroc acid recovery, and silica rejection, so that the optimum operating conditions would be found out. In the case where the operating conditions are the temperature 35$^{\circ}$C, The pressure 20atm, and the feed flow rate 2.82 l/min, for the boric acid aqueous solution, the boric acid recovery 58.7% and the permeation rate 2.82 l/min were obtained. And also the results showed the boric acid recovery 68.1% and the permeation rate 1.56 l/min at the operating conditions, 35$^{\circ}$C and 10atm. For the boric acid solution containing silica, when the feed solution are at the conditions of 35$^{\circ}$C and 3.2atm, the boric acid recovery 69.7%, the silica rejection 97.5% and the permeation rate 0.47 l/min were obtained. And the operating conditions were at 35$^{\circ}$C, 20atm and the feed flow rate 2.92 l/min, the results showed the boric acid recovery 56.4%, the silica rejection 96.1% and the permeation rate 2.72 l/min.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.6
• /
• pp.49-54
• /
• 2020

The purpose of this study is to investigate the effects of the change in the spindle speed and the feed rate on the diameter change of a hole using a boring cutter for the internal boring process of AL6061-T4 alloys. The experimental results are quantitatively analyzed by applying the factor analysis and the response surface analysis of the experimental design method. The tendency of the diameter change according to the change in the spindle speed and feed level is also evaluated. During the internal boring process of AL6061-T4 alloys, the main factor affecting the diameter change is the spindle speed in which the diameter decreases as the number of revolutions increases. In addition, the diameter tends to increase as the feed is increased; however, as the number of spindle revolutions increases, the influence of the feed decreases.

• Applied Biological Chemistry
• /
• v.17 no.1
• /
• pp.49-53
• /
• 1974

Mohan's aniline procedure for the quantitative determination of niacin in feed additives containing various vitamines and minerals was compared with microbiological procedure utilizing growth rate of Lactobacillus arabinosus 17-5. Microbioassay was more sensitive than chemical procedure to the detection of standard niacin and was applicable to the determination of minute amounts of niacin. while both microbioassay and chemical proce dure were discovered to be unsatisfactory by the recovery test for the determination of niacin in feed additives containing much interfering substances. But the possibility of the determination of niacin in feed additives on chemical prccedure together with microbioassay was proved.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.1
• /
• pp.69-74
• /
• 2014

An OrthoMTA compacter is made by machining a Ni-Ti alloy wire using tapered helix creep-feed grinding machines. This aim of this study is to find the optimal dressing conditions to sharpen the corner of a cubic boron nitride (CBN) wheel. On the basis of the results of various experiments, it is verified that the most important factors in dressing are the dressing depth and feeding method, whereas the feed rate has less importance for producing a smaller corner R value. The study also finds the optimum dressing depth to reduce the dressing time, a feeding speed and method to stabilize the machining, and the mesh grade for the CBN wheel to make the groove of the compacter deeper.