• Tribology and Lubricants
• /
• 제17권2호
• /
• pp.109-115
• /
• 2001

The lubricating performance of 23 kinds of polyol ester base oils 〔POEs〕 having different branch shapes was investigated by using a four ball tribometer under boundary lubrication condition. All the polyol ester base oils used in this study were made up of polyhydric alcohols of two-four valence and normal or branched fatty acids of different carbon number. The wear characteristics of polyol ester base oils are different from those of mineral oil, strongly affected by the branch shapes of fatty acids in their molecles. In particular, the polyol ester base oils having normal fatty acids such as n-octanoic acid, n-nonanoic acid etc. show much better wear performance than POEs having branched fatty acids such as 2-ethylhexanoic acid, 3,5,5-trimethyl hexanoic acid, etc. As the carbon chain length of normal fatty acids, in case of POEs of normal fatty acids, is increased, their wear rate is decreased and, in case of POEs of branched fatty acids, as the degree of branch of branched fatty acids is decreased, their wear rate is decreased. All the wear results of polyol ester base oils could be reasonably explained by comparing cohesive ability among fatty acid molecules in adsorption film by fatty acids obtained as POEs were decomposed.

• 한국식품영양학회지
• /
• 제36권5호
• /
• pp.354-359
• /
• 2023

A mono-type glycerine fatty acid ester compound was chemically synthesized using medium-chain fatty acids with antibacterial activity, and the physicochemical quality and antibacterial activity of the synthesized glycerine medium-chain fatty acid ester compound were measured. At a reaction molar ratio of MCT(medium chain triglyceride) to glycerine of 1:2.5, 48.15% mono ester was produced. The physicochemical analysis of the synthesized glycerine fatty acid ester compound showed an acid content of 0.38~0.60%, which tended to increase slightly as the glycerine molar ratio increased. The saponification value decreased as the synthesized molar ratio of glycerine increased from 218 to 284. The number of bacteria was measured to confirm the degree of antibacterial activity of glycerine medium-chain fatty acid esters against food poisoning bacteria, Bacillus cereus and Salmonella typhi. The number of bacteria significantly decreased as the MCT:glycerine molar ratio increased. In particular, the antibacterial effect between the treatment groups was the highest when at an MCT:glycerine molar ratio of 1:2.5.

• ALGAE
• /
• 제31권1호
• /
• pp.61-72
• /
• 2016

Arctic microalgae thrive and support primary production in extremely cold environment. Three Arctic green microalgal strains collected from freshwater near Dasan Station in Ny-Alesund, Svalbard, Arctic, were analyzed to evaluate the optimal growth conditions and contents of fatty acids. The optimal growth temperature for KNF0022, KNF0024, and KNF0032 was between 4 and 8℃. Among the three microalgal strains, KNF0032 showed the maximal cell number of 1.6 × 107 cells mL^-1 at 4℃. The contents of fatty acids in microalgae biomass of KNF0022, KNF0024, and KNF0032 cultured for 75 days were 37.34, 73.25, and 144.35 mg g^-1 dry cell weight, respectively. The common fatty acid methyl esters (FAMEs) analyzed from Arctic green microalgae consisted of palmitic acid methyl ester (C16:0), 5,8,11-heptadecatrienoic acid methyl ester (C17:3), oleic acid methyl ester (C18:1), linoleic acid methyl ester (C18:2), and α-linolenic acid methyl ester (C18:3). KNF0022 had high levels of heptadecanoic acid methyl ester (26.58%) and heptadecatrienoic acid methyl ester (22.17% of the total FAMEs). In KNF0024 and KNF0032, more than 72.09% of the total FAMEs consisted of mono- and polyunsaturated fatty acids. Oleic acid methyl ester from KNF0032 was detected at a high level of 20.13% of the FAMEs. Arctic freshwater microalgae are able to increase the levels of polyunsaturated fatty acids under a wide range of growth temperatures and can also be used to produce valuable industrial materials.

• 한국응용과학기술학회지
• /
• 제6권1호
• /
• pp.21-26
• /
• 1989

Four fatty acid vinyl esters were synthesized by transesterification between vinyl acetate and lauric acid, myristic acid, palmitic acid, stearic acid, respectively. Fatty acid vinyl ester oligomers were prepared from polymerization of four fatty acid vinyl esters in the presence of potassium persulfate in methanol. The ${\alpha}-sulfonation$ of these four fatty acid vinyl ester oligomer were carried by direct addition of sulfur trioxide. Especially, molecular weights of sodium ${\alpha}-sulfo$ fatty acid vinyl ester oligomers were measured by boiling point method.

• 동아시아식생활학회지
• /
• 제3권1호
• /
• pp.67-71
• /
• 1993

This study ws prepared to evaluate sensory characteristics about appearance, color, texture and overall acceptability of rice extrudate with added glycerin fatty acid ester by balance incomplete block design. According to evaluated mean of adjusted treatments, appearance and color were represented maximum value in rice extrudate with added 3.0% and 1.0% glycerin fatty acid ester respectively. Extrudate with added 1.5% emulsifier revealed best texture and overall acceptability among whole treatments. On the results of this research about sensory characteristics, extrudate with added 1.5% glycerin fatty acid ester was considered excellent because of highest score of texture and overall acceptability, and predominent score of appearance and color.

• 한국인쇄학회지
• /
• 제29권3호
• /
• pp.1-16
• /
• 2011

In these days, according to increased environmental regulations, to reduce the VOC content in paints and inks efforts are now in progress. A lot of research have progressed hydrocarbon solvents substitute with vegetable oil or ester in the printing ink but it is restricted to use vegetable oil in the inks because of high molecular weight and viscosity. Oil ester currently developed for printing inks still have some drawbacks, but overall the printability and print quality when using ester than hydrocarbon solvents are showing good results. Thus, in this paper, I studied about the properties variation of the varnish and inks according to vegetable ester, after I reacted vegetable ester using the vegetable fatty acid and ethyl alcohol, butyl alcohol. The compared in order of average molecular weight by the GPC method, rheological properties were found by rotational rheometer, and emulsion behavior were compared by high speed emulsification tester.

• 한국해양바이오학회지
• /
• 제10권2호
• /
• pp.44-52
• /
• 2018

A synthetic pathway, which consisted of fatty acid double bond hydratase, alcohol dehydrogenase, and Baeyer-Villiger monooxygenase, was applied to Chlorella oil to produce ester fatty acids, which can be hydrolyzed into medium chain fatty acids. Since linoleic acid is a major fatty acid constituent of Chlorella oil, a fatty acid double bond hydratase from Lactobacillus acidophilus NBRC13951, which is able to convert linoleic acid into 13-hydroxyoctadec-9-enoic acid, was used. Recombinant Escherichia coli expressing the fatty acid double bond hydratase from L. acidophilus NBRC13951 successfully transformed linoleic acid in Chlorella oil hydrolysates into 13-hydroxyoctadec-9-enoic acid with approximately 60% conversion yield. 13-Hydroxyoctadec-9-enoic acid was further converted into ester fatty acids by the recombinant E. coli expressing a long chain secondary alcohol dehydrogenase and a Baeyer-Villiger monooxygenase. The resulting ester fatty acids were then hydrolyzed into medium chain fatty acids by a lipase. Overall, industrially relevant medium chain fatty acids were produced from Chlorella oil hydrolysates. Thereby, this study may contribute to biosynthesis of medium chain fatty acids from microalgae oils as well as long chain fatty acids.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.541-543
• /
• 2006

The feasibility of biodiesel production from soapstock by acid catalyst was tested. The water content of soapstock was more than 40%. Before the esterification of soapstock, the pre-treatment of soapstock was conducted adding potassium hydroxide and sulfuric acid. The pre-treated soapstock contained 99.6wt% of free fatty acid. When the free fatty acid was esterified with methanol, the fatty acid methyl ester content became 91.7wt% under the solid acid catalyst, Amberlyst-15. When this biodiesel was distilled the methyl ester content was 98.1wt% which satisfied the biodiesel Standard. Amberlyst-15 could be recovered easily because it was the soliid catalyst. When sulfuric acid was used as the acid catalyst, the fatty acid methyl ester content was 91.0wt%. From the results, it was possible to produce biodiesel efficiently from soapstock after pre-treatment. Because soapstock is very cheap, it will become good feedstock for biodiesel product ion.

• 한국식생활문화학회지
• /
• 제17권3호
• /
• pp.260-266
• /
• 2002

This study was performed to know effect of Yackwa quality when sucrose fatty acid esters(S-570, S-970, S-1570) were added as an emulsifier. In mechanical characteristics, the Yackwa of sucrose fatty acid esters did greatly decrease the hardness, cohesiveness, springiness and gumminess, respectively, and increase the brittleness compared to the Yackwa of non-emulsifier and egg yolk. This tendency showed at the above level of 1.0% S-570, and 0.5% S-970 and S-1570, respectively. In sensory evaluation, the Yackwa of sucrose fatty acid esters increased the softness compared to the Yackwa of non-emulsifiers and egg yolk. There were significantly differences in the preference at 0.5% level of S-970 and 1.5% level of S-1570, respectively compared to other treatments. In conclusion, the 0.5% level of S-970 would be mostly useful level of emulsifier for making Yackwa.

• 한국응용과학기술학회지
• /
• 제36권4호
• /
• pp.1443-1459
• /
• 2019

리글리세린지방산에스터 비이온계면활성제는 식품 등에 오래전부터 사용해 왔으며 PEG계 비이온계면활성제의 안전성 문제에 대한 대안으로 제시되고 있다. 폴리글리세린지방산에스터 계면활성제는 친수기인 폴리글리세린과 친유기인 지방산을 결합시켜 합성된다. 친수기인 폴리글리세린은 글리세린, 글리시돌, 에피클로로히드린 등을 이용하여 중합되는 데 폴리글리세린 중합반응의 주요 이슈는 분기·환상형태가 아닌 직쇄형태의 폴리글리세린의 함량을 높이고 중합도의 분포를 좁히는 것이다. 친수기인 폴리글리세린에 지방산계 친유기를 결합시키는 방법에는 에스터화 반응 등의 화학적 합성법과 지방분해효소를 이용한 효소 합성법이 있다. 폴리글리세린지방산에스터 합성의 주요 이슈는 에스터화정도를 조절하면서 반응수율을 높이고 부반응을 억제하는 것이다.