• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.1
• /
• pp.1-11
• /
• 2017

In this paper, design requirements of the large radar were investigated, and development was performed through the analysis and design. Large radar should be designed by bearing the 75 knot wind force and $20kg/m^2$ ice mass as operating conditions in order to meet structural stability, and driving torque and bearing load were calculated for securing the driving stability. Thermal dissipation analysis was performed considering TRM and DC-DC Converter's limitation temperature by $50^{\circ}C$ ambient temperature condition in order to attain thermal stability, and PSD and shock analysis were carried out by using MIL-STD-810G vibration and shock specification in order to transport and installation of the large radar. As a result, all components of large radar could secure the structural stability more than 2.8 factor of safety, and driving stability was also secured with adequate bearing fatigue life. Thermal stability was attained by allowable max temperature 88.7 C of the TRM, and structural stability for transportation and installation of the large radar was also secured more than 5 factor of safety. After it was transported and installed to the radar site, operating capability was finally verified by rotating the large radar.

• The Journal of Internal Korean Medicine
• /
• v.39 no.1
• /
• pp.9-21
• /
• 2018

Objective: Graves' disease, the most common cause of primary hyperthyroidism, is a thyroid specific autoimmune disorder. When resistance to medication is shown in spite of long term therapy with anti-thyroid drugs, radioactive iodine therapy would be chosen in Western medicine. However, this therapy has often been reported to cause patients have hypothyroidism, thus requiring them to take levothyroxine for the rest of their lives. In this study, we evaluate the clinical efficacy and safety of Ahnjeonbaekho-tang (AJBHT) on patients with Graves' disease. Methods: We prescribed AJBHT for 3 months to two groups: patients who had been taking antithyroid drugs were administered AJBHT after discontinuing the antithyroid drugs ($Com-Tx{\rightarrow}Single-Tx$), and patients who had not been taking antithyroid drugs were started with AJBHT (Single-Tx) immediately. We evaluated the thyroidal function test (TFT) and visual analogue scale (VAS) for clinical symptoms for 3 months. Results: Serum T3 and fT4 were significantly decreased in both groups and remission rate of thyroidal hormones were significantly improved in the Single-Tx group. The clinical symptoms of palpitation, fatigue, and heat intolerance were significantly improved in both groups. In the safety analysis, all patients were in normal range of liver, renal function blood test and common blood count. Conclusion: From these results, we suggested that AJBHT was effective on TFT and clinical symptoms of Graves' disease. The study supports that AJBHT may be a useful agent for patients with Graves' disease who are resistant to antithyroid medication or radioactive iodine therapy, and for patients at first diagnosis.

• Journal of Aerospace System Engineering
• /
• v.12 no.4
• /
• pp.98-105
• /
• 2018

The satellite is exposed to various launch environments such as random vibrations and shock. Accordingly, structural design of electronic equipment mounted on satellite must meet reliability requirements at the box level. In addition, it is essential to secure the reliability of the solder joint applied to electronic equipment. In this paper, we performed a modal and quasi-static analysis for the purpose of satisfaction of the design requirements of the CCB (Camera Controller Box) present on the 500 kg-class compact advanced satellite (CAS500). In addition, structural safety of electronic components was verified by the Steinberg's method and random equivalent static analysis.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.481-484
• /
• 2011

Recent Automotive technology is driven from mechanical device to the electronic components which improve the vehicle's safety and convenience. The future competitiveness of the car will come from safety issues and energy efficiency, convenience and the application of the technologies. In this study, various techniques for driver drowsiness detection are introduced and compared with each others. The advantages and disadvantages of commercially available technologies and developed technologies are compared. To enhance the detection resolution, multiple sensing technologies are introduced in this paper. The feasibility of two drowsiness detection methods, that is, existing camera image recognition method and bio signal analysis method, are tested. The direct drowsiness detection by the camera image of eyes and driver's vital signs detected indirectly are combined and analyzed by the developed noble algorithm for stress, fatigue, drowsiness detection with a more accurate high-drowsiness detection.

• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.177-181
• /
• 2019

The purpose of this study was to investigate the degree of blocking of blue light of the tips and goggles of the curing light during the dental treatment using the blue light of the light curing. The light curing tips and goggles were placed on a UV-Vis spectrometer and the results of light transmission were analyzed. Comparative analysis. As a result, all four types of light curing tips used in the analysis showed excellent blue light blocking effect. In the case of safety goggles, red-type goggles showed blue light transmittance similar to those of light curing than yellow-type goggles. As a result, it is recommended that the attachment of the light curing with high degree of blue light blocking and the wearing of safety glasses are necessary to protect the eyes. This behavior is thought to reduce persistent irritation and fatigue in the eyes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.768-771
• /
• 2003

The impulse between launch vehicle and atmosphere can generate a lot of noise and vibration during the process of launching a satellite. Structurally, electronic equipment (KOMPSAT 2, RDU : Remote Drive Unit) of a satellite consists of aluminum case containing PCB (Printed circuit boards). Each PCB has resistors and IC (Integrated circuits). Noise and vibration of wide frequency band are transferred to the inside of fairing, subsequently creating vibration of the electronic equipment of the satellite. In this situation. random vibration can cause malfunctioning of the electronic equipment of the device. Furthermore, when tile frequency of random vibration meets with natural frequency of PCB. fatigue fracture nay occur in the part of solder joint. The launching environment, thus. needs to be carefully considered when designing the electronic equipment of a satellite. In general. the safety of the electronic equipment is supposed to be related to the natural frequency, shapes of mode and dynamic deflection of PCB in the electronic equipment. Structural vibration analysis of PCB and its electronic components can be performed using either FEM(Finite Element Method) or vibration test. In this study. the natural frequency and dynamic deflection of PCB are measured by FEM, aud the safety of the electronic components of PCB is being evaluated according to the results. This study presents a unique method for finite element modeling and analysis of PCB and its electronic components. The results of FEA are verified by vibration test. The method proposed herein may be applicable to various designs from the electronic equipments of a satellite to home electronics.

• Journal of the Korean Society of Safety
• /
• v.24 no.2
• /
• pp.17-22
• /
• 2009

Thermal stress and elastic creeping stress analysis was conducted by finite element method to simulate start-up process of a boiler header of 500MW standard fossil power plant. Start-up temperature and operating pressure history were simplified from the real field data and they were used for the thermal stress analysis. Two kinds of thermal stress analysis were considered. In the first case only temperature increase was considered and in the second case both of temperature and operating pressure histories were considered. In the first analysis peak stress was occurred during the temperature increase from the room temperature. Hence cracking or fracture may occur at the temperature far below the operating maximum temperature. In the results of the second analysis von Mises stress appeared to be higher after the second temperature increase. This is due to internal pressure increase not due to the thermal stress. When the stress components of radial(r), hoop($\theta$) and longitudinal(z) stress were investigated, compression hoop stress was occurred at inner surface of the stub tube when the temperature increased from room temperature to elevated temperature. Then it was changed to tension hoop stress and increased because of the operating pressure. It was expected that frequent start-up and shut-down operations could cause thermal fatigue damage and cracking at the stub tube hole in the header. Elastic-creeping analysis was also carried out to investigate the stress relaxation due to creep and stabilized stress after considerable elapsed time. The results could be used for assessing the creep damage and the residual life of the boiler header during the long-tenn service.

• Journal of the Korean Home Economics Association
• /
• v.50 no.5
• /
• pp.51-65
• /
• 2012

The purpose of this study is to provide empirical basic data to develop public uniforms design, by understanding international universality and advanced design sense, through the analysis of public uniforms design at home and abroad. The theoretical study reviewed the character and area of public design, and the concepts and requirements of public uniforms. The empirical study analyzed public uniform design at home and abroad, focusing on typical public uniforms, such as police, fire fighter, and street cleaner. The results of this study were as follows. First, the police uniform has a standardized and formal suit style, which consists of a single-breasted dk-PB jacket with a notched collar and pants. It uses PB as the main color, to show their authority and role reliability. Epaulet or badge, which represents belonging and difference in rank, are attached to express the identity of an organization. Second, the fire fighter uniform consists of a hip length coat with a stand collar effective for heat shielding, and straight pants with flap pockets, in which it is easy to put things. Its main color is dkg-PB, to mitigate visual fatigue and enhance comfort, and an accent color scheme is used, to effectively raise visual attention and safety. Finally, the street cleaner uniform has a casual style, which consists of a jumper with a shirt collar and pants for high activity. v-YR and R with high chroma is mainly used, for increased attention during day and night work, to stress safety.

• Journal of the Korean Society of Food Culture
• /
• v.35 no.2
• /
• pp.156-166
• /
• 2020

In this study, 594 questionnaires administered to men and women residing in the capital metropolitan area who work night shifts were analyzed in order to study the effect of health information cognition on healing needs in accordance with the type of food selection criteria of the night worker. The results of confirmatory factor analysis in deriving food selection type identified four categories, a safety seeking type, a food exploratory type, a habitual seeking type, and a rational type, and the cognition types on health information were classified into physical cognition and psychological cognition. The need for healing, which was the investigated factor, was found to have a high correlation between questionnaire items with high reliable consistency. The results of this study were as follows. First, the food selection types of safety seeking type and habitual food seeking type had significant positive effects on the cognitive level of physical health information, and food exploratory type and habitual seeking type had significant positive effects on the cognitive level of psychological health information. In addition, it was shown that food exploratory type and rational type had significant positive effects on healing needs. As a result of this study, it was found that the cognition level of physical and psychological information was different according to food selection type, and the higher the cognitive level, the higher the healing needs. In particular, the result that the level of psychological health information significantly affected healing needs signifies that there is a demand to develop programs and menus that satisfy various needs related to healing and recovery from fatigue. In addition, further interest and study on the health and healing of night workers are required.

• Journal of the Korean Society of Safety
• /
• v.28 no.1
• /
• pp.88-94
• /
• 2013

The purpose of this study is to find out the difference of foot pressure according to the firefighter's work postures for providing the basic information to prevent Musculoskeletal disorders. This study was conducted by 9 male firefighters. Work postures were selected for rescuee handling, fire hose and hydraulic rescue equipment work postures. These were divided into 3 position, "High", "Middle" and the postures of taking out and letting down hydraulic rescue equipment were analyzed as starting point and end point respectively. Foot Pressure was used to analyze contact area, peak pressure, and maximum force in terms of work postures, and compared between fire hose and hydraulic rescue equipment work postures. The results of foot pressure are as follows. According to the results of rescuee handling work postures, one person handling posture showed wide contact area and foot pressure showed the highest at right foot. Accoridng to the (High), (Middle), (Low) postures of fire hose, the results didn't show the difference among the contact area, peak pressure and maximum force. As the results of hydraulic rescue equipment work postures, (Low) postures showed the highest in terms of the right foot of contact area, peak pressure and maximum force and (High) postures showed the highest in left foot. The increase of foot pressure lead to be inconvenience of low extremity and muscle fatigue for maintaining postural control cause pain. Thus, it is necessary to design insole-equipped working shoe for reduce the impulse and effect of foot during the rescuee handling work which standing out as foot pressure.