• International Journal of Advanced Culture Technology
• /
• v.9 no.3
• /
• pp.131-141
• /
• 2021

The present study is following a series of research investigations on design resources coming from collected data referring to users' awareness and preferences. The aim of this research is to test the Healthcare Environmental Color Index as a basis for practitioners in the field of healthcare design. An array of color samples selected from previous research, have been presented to the respondents via an online survey, in order to identify the preferences of the two groups on the relation between environmental color and health. As a result of the first experiment and through the comparison of processed data, the maximum percentage of respondents from each group is validating the relation between environmental color and health. For the second experiment we intend to highlight the patterns of color preferences for each group, and thus to test the color samples healing function. The compared data also showed a higher awareness of Koreans than Romanians on the potential of color applied to healing environment. Last but not least in the third experiment we show the top five color samples preferred by each group. It is significant that the comparison of the results validated once more some of our previous findings related to the healthcare environment, such as: the general preference for the green hue (associated to fatigue relax according to color psychology) and the blue hue (sedation release effect) but also the yellow hue - associated to bright energy. Three out of the top five preferred color samples have been identical to both groups while the other two samples have shown characteristic variations. These results show that similarities are strong and can be used in a glocal design strategy as an accessible tool for any practitioner. Based on the Healthcare Environmental Color Index and users' preferences analysis, a new design culture for healthcare can be established and developed.

• Tuberculosis and Respiratory Diseases
• /
• v.84 no.1
• /
• pp.35-45
• /
• 2021

Globally, cardiovascular diseases and chronic obstructive pulmonary disease (COPD) are the leading causes of the non-communicable disease burden. Overlapping symptoms such as breathing difficulty and fatigue, with a lack of awareness about COPD among physicians, are key reasons for under-diagnosis and resulting sub-optimal care relative to COPD. Much has been published in the past on the pathogenesis and implications of cardiovascular comorbidities in COPD. However, a comprehensive review of the prevalence and impact of COPD management in commonly encountered cardiac diseases is lacking. The purpose of this study was to summarize the current knowledge regarding the prevalence of COPD in heart failure, ischemic heart disease, and atrial fibrillation. We also discuss the real-life clinical presentation and practical implications of managing COPD in cardiac diseases. We searched PubMed, Scopus, EMBASE, and Google Scholar for studies published 1981-May 2020 reporting the prevalence of COPD in the three specified cardiac diseases. COPD has high prevalence in heart failure, atrial fibrillation, and ischemic heart disease. Despite this, COPD remains under-diagnosed and under-managed in the majority of patients with cardiac diseases. The clinical implications of the diagnosis of COPD in cardiac disease includes the recognition of hyperinflation (a treatable trait), implementation of acute exacerbations of COPD (AECOPD) prevention strategies, and reducing the risk of overuse of diuretics. The pharmacological agents for the management of COPD have shown a beneficial effect on cardiac functions and mortality. The appropriate management of COPD improves the cardiovascular outcomes by reducing hyperinflation and preventing AECOPD, thus reducing the risk of mortality, improving exercise tolerance, and quality of life.

• Structural Engineering and Mechanics
• /
• v.78 no.1
• /
• pp.87-102
• /
• 2021

Long span cross-rope suspension structure is an innovative structural system evolved from typical Cross-Rope Suspension (CRS) guyed tower, a type of supporting system with short span suspension cable supporting overhead power transmission lines. In mountainous areas, the span length of suspension cable was designed to be extended to hundreds or over one thousand meters, which is applicable for crossing deep valleys. Vortex Induced Vibration (VIV) of overhead power transmission lines was considered to be one of the major factors of its fatigue and service life. In this paper, VIV and its controlling by Stockbridge damper for long span CRS was discussed. Firstly, energy balance method and finite element method for assessing VIV of CRS were presented. An approach of establishing FE model of long span CRS structure with dampers was introduced. The effect of Stockbridge damper for overall vibration of CRS was compared in both theoretical and numerical approaches. Results indicated that vibration characteristics of conductor in long span CRS compared with traditional tower-line system. Secondly, analysis on long span CRS including Stockbridge damper showed additional dampers installed were essential for controlling maximum dynamic bending stresses of conductors at both ends. Moreover, factors, including configuration and mass of Stockbridge damper, span length of suspension cable and conductor and number of spans of conductor, were assessed for further discussion on VIV controlling of long span CRS.

• Smart Structures and Systems
• /
• v.24 no.1
• /
• pp.127-139
• /
• 2019

Residual drifts after an earthquake can incur huge repair costs and might need to replace the infrastructure because of its non-reparability. Proper functioning of bridges is also essential in the aftermath of an earthquake. In order to mitigate pounding and unseating damage of bridges subjected to earthquakes, a self-adaptive Ni-Ti shape memory alloy (SMA)-cable-based frictional sliding bearing (SMAFSB) is proposed considering self-adaptive centering, high energy dissipation, better fatigue, and corrosion resistance from SMA-cable component. The developed novel bearing is associated with the properties of modularity, replaceability, and earthquake isolation capacity, which could reduce the repair time and increase the resilience of highway bridges. To evaluate the super-elasticity of the SMA-cable, pseudo-static tests and numerical simulation on the SMA-cable specimens with a diameter of 7 mm are conducted and one dimensional (1D) constitutive hysteretic model of the SMAFSB is developed considering the effects of gap, self-centering, and high energy dissipation. Two types of the SMAFSB (i.e., movable and fixed SMAFSBs) are applied to a two-span continuous reinforced concrete (RC) bridge. The seismic vulnerabilities of the RC bridge, utilizing movable SMAFSB with the constant gap size of 60 mm and the fixed SMAFSBs with different gap sizes (e.g., 0, 30, and 60 mm), are assessed at component and system levels, respectively. It can be observed that the fixed SMAFSB with a gap of 30 mm gained the most retrofitting effect among the three cases.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.2
• /
• pp.123-130
• /
• 2019

The flow around a curved riser exposed to the current in various directions was investigated at a Reynolds number of 100 using a numerical simulation. The present study found that the flow features of the curved riser were distinct from those of a straight riser as a result of its large radius of curvature. Namely, there were various wake patterns according to the flow's incident angle. As the incident angle increased from $0^{\circ}$ to $90^{\circ}$, a two-row street of vortices that developed along the centerline of the curved riser became more apparent. However, when the incident angle approached $180^{\circ}$ from $90^{\circ}$, these vortices were completely suppressed by the interaction between the wake and an axial flow induced by the curvature of the riser. To identify this feature, the sectional force coefficients were also considered, and it was found that the force coefficients could be different from those found in a sectional analysis based on the strip theory when investigating vortex-induced vibration. As a result, this kind of study would be important to realistically estimate the riser VIV (vortex-induced vibration) and fatigue life, and a new force coefficient database that includes the three-dimensional effect should be established.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.2
• /
• pp.337-344
• /
• 2019

The purpose of this study men and women 20 to 30 of 16 patients wearing thick insoles 5cm before and after squat exercise based on the angle of the knee joint(0-, 60-, 90-degree) was to observe the muscle activities. For this through the analysis of the rectus femoris EMG, vatus medialis vatus lateralis, tibialis anterior, gastrocnemius MVIC were quantified using. The results following results were obtained. After wearing the thick insole standing position(0') had increased EMG activity of vastus lateralis muscle, the knee angle is rectus femoris, vatus medialis, vastus lateralis, tibialis anterior, gastrocnemius muscles were increased muscle activity. thick insole of the ankle joint, causing plantar flexion forward weight distritbution by focusing is normally the body would lead to an array. When an array of everyday life, these abnormalities increases energy consumption, and muscle fatigue, increase will cause an imbalance in the muscles. Therefore, wearing thick insoles by changing the activity of the muscles may cause knee pain.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.213-225
• /
• 2020

Floating Offshore Wind Turbines (FOWT) installed in the deep sea regions where stable and strong wind flows are abundant would have significantly improved energy production capacity. When designing FOWT, it is essential to understand the stability and motion performance of the floater. Water tank model tests are required to evaluate these aspects of performance. This paper describes a model test and numerical simulation for a 750-kW semi-submersible platform wind turbine model-II. In the previous model test, the 750-kW FOWT model-I suffered slamming phenomena from extreme wave conditions. Because of that, the platform freeboard of model-II was increased to mitigate the slamming load on the platform deck structure in extreme conditions. Also, the model-I pitch Response Amplitude Operators (RAO) of simulation had strong responses to the natural frequency region. Thus, the hub height of model-II was decreased to reduce the pitch resonance responses from the low-frequency response of the system. Like the model-I, 750-kW FOWT model-II was built with a 1/40 scale ratio. Furthermore, the experiments to evaluate the performance characteristics of the model-II wind turbine were executed at the same location and in the same environment conditions as were those of model-I. These tests included a free decay test, and tests of regular and irregular wave conditions. Both the experimental and simulation conditions considered the blade rotating effect due to the wind. The results of the model tests were compared with the numerical simulations of the FOWT using FAST (Fatigue, Aerodynamics, Structures, and Turbulence) code from the National Renewable Energy Laboratory (NREL).

• PNF and Movement
• /
• v.19 no.2
• /
• pp.233-242
• /
• 2021

Purpose: The purpose of this study was to determine the changes in foot contact area and pressure when walking with a functional insole that emphasizes the Hallux point as compared to a general insole. Methods: In this study, an experiment was conducted to investigate changes in plantar pressure and contact area for a functional insole that emphasized the Hallux point as compared to a general insole. A lower extremity robot was used for walking reproduction. First, the gait sequence according to the two insoles was determined through a randomized controlled trial comparison. According to the sequence procedure, the insole was attached to the shoe and then worn on the right side of the lower extremity robot for gait reproduction at a normal gait speed of 20 steps per minute. After programming the robot to walk, the experiment was carried out. The result value was determined by averaging the pressure and area data of the fore and rear foot measures after walking at 20 steps per minute. Results: The functional insole that emphasized the hallux point significantly increased the forefoot and rearfoot contact area (p < 0.05) and significantly decreased the forefoot and rearfoot contact pressure (p < 0.05) compared to the general insole. Conclusion: A functional insole that emphasizes the hallux point does not collapse the medial longitudinal arch during gait, increasing foot stability and reducing fatigue. Thus, this functional insole needs to be widely used clinically.

• KEPCO Journal on Electric Power and Energy
• /
• v.7 no.1
• /
• pp.129-135
• /
• 2021

Recently, additive manufacturing (AM) technology such as powder bed fusion (PBF) and directed energy deposition (DED) are actively attempted as consumers' needs for parts with complex shapes and expensive materials. In the present work, the effect of processing parameters on the mechanical properties of 316L stainless steel coupons fabricated by PBF and DED AM technology was investigated. Three major mechanical tests, including tension, impact, and fatigue, were performed on coupons extracted from the standard components at angles of 0, 45, 90 degrees for the build layers, and compared with those of investment casting and commercial wrought products. Austenitic 316L stainless steel additively manufactured have been well known to be generally stronger but highly vulnerable to impact and lack in elongation compared to casting and wrought materials. The process-induced pore density has been proved the most critical factor in determining the mechanical properties of AM-built metal parts. Therefore, it was strongly recommended to reduce those lack of fusion defects as much as possible by carefully control the energy density of the laser. For example, under the high energy density conditions, PBF-built parts showed 46% higher tensile strength but more than 75% lower impact strength than the wrought products. However, by optimizing the energy density of the laser of the metal AM system, it has been confirmed that it is possible to manufacture metal parts that can satisfy both strength and ductility, and thus it is expected to be actively applied in the field of electric power section soon.

• Journal of Convergence for Information Technology
• /
• v.11 no.7
• /
• pp.232-241
• /
• 2021

The purpose of this study is to find out the difference in perception of skin beauticians according to the perception of bamboo therapy. For the study, 301 skin beauticians working in skin care departments were randomly selected and conducted for 28 days from April 19 to April 29, 2019. In the results of this study, skin cosmetologists who are aware of bamboo therapy have a very high interest and interest in bamboo therapy compared to skin cosmetologists who do not recognize bamboo therapy, and have a very high willingness to use it in the industrial field. They recognized that it was a way to help skin beauticians protect their joints at the same time as the body shape management effect of Bamboo.