Seismic damage mitigation of bridges with self-adaptive SMA-cable-based bearings |
Zheng, Yue
(Department of Bridge Engineering, Tongji University)
Dong, You (Department of Civil and Environmental Engineering, The Hong Kong Polytechnic University) Chen, Bo (Key Laboratory of Roadway Bridge and Structural Engineering, Wuhan University of Technology) Anwar, Ghazanfar Ali (Department of Civil and Environmental Engineering, The Hong Kong Polytechnic University) |
1 | Alam, M.S., Bhuiyan, M.R. and Billah, A.M. (2012), "Seismic fragility assessment of SMA-bar restrained multi-span continuous highway bridge isolated by different laminated rubber bearings in medium to strong seismic risk zones", Bull. Earthq. Eng., 10(6), 1885-1909. DOI |
2 | Baker, J.W. and Allin Cornell, C. (2005), "A vector-valued ground motion intensity measure consisting of spectral acceleration and epsilon", Earthq. Eng. Struct. D., 34(10), 1193-1217. https://doi.org/10.1002/eqe.474. DOI |
3 | Barbato, M. and Conte, J.P. (2006), "Finite element structural response sensitivity and reliability analyses using smooth versus non-smooth material constitutive models", Int. J. Reliab. Saf., 1(1-2), 3-39. DOI |
4 | Bhuiyan, A., Okui, Y., Mitamura, H. and Imai, T. (2009), "A rheology model of high damping rubber bearings for seismic analysis: Identification of nonlinear viscosity", Int. J. Solids Struct., 46(7-8), 1778-1792. https://doi.org/10.1016/j.ijsolstr.2009.01.005. DOI |
5 | Brinson, L.C. (1993), "One-dimensional constitutive behavior of shape memory alloys: thermomechanical derivation with nonconstant material functions and redefined martensite internal variable", J. Intel. Mat. Syst. Str., 4(2), 229-242. https://doi.org/10.1177/1045389X9300400213 DOI |
6 | Caltrans, S. (2010), Seismic Design Criteria, Ver. 1.6, California Dept. of Transportation, Sacramento, California,USA. |
7 | Choi, E. (2002), "Seismic analysis and retrofit of mid-America bridges", School of Civil and Environmental Engineering, Georgia Institute of Technology. |
8 | Choi, E., DesRoches, R. and Nielson, B. (2004), "Seismic fragility of typical bridges in moderate seismic zones", Eng. Struct., 26(2), 187-199. https://doi.org/10.1016/j.engstruct.2003.09.006. DOI |
9 | Choi, E., Nam, T.h. and Cho, B.S. (2005), "A new concept of isolation bearings for highway steel bridges using shape memory alloys", Can. J. Civil Eng., 32(5), 957-967. https://doi.org/10.1139/l05-049. DOI |
10 | Cornell, C.A., Jalayer, F., Hamburger, R.O. and Foutch, D.A. (2002), "Probabilistic basis for 2000 SAC federal emergency management agency steel moment frame guidelines", J. Struct. Eng., 128(4), 526-533. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:4(526). DOI |
11 | DesRoches, R., Pfeifer, T., Leon, R.T. and Lam, T. (2003), "Full-scale tests of seismic cable restrainer retrofits for simply supported bridges", J. Bridge Eng., 8(4), 191-198. https://doi.org/10.1061/(ASCE)1084-0702(2003)8:4(191). DOI |
12 | Dion, C., Bouaanani, N., Tremblay, R., Lamarche, C.P. and Leclerc, M. (2011b), "Real-time dynamic substructuring testing of viscous seismic protective devices for bridge structures", Eng. Struct., 33(12), 3351-3363. https://doi.org/10.1016/j.engstruct.2011.06.021. DOI |
13 | Dezfuli, F.H. and Alam, M.S. (2014), "Performance-based assessment and design of FRP-based high damping rubber bearing incorporated with shape memory alloy wires", Eng. Struct., 61, 166-183. https://doi.org/10.1016/j.engstruct.2014.01.008. DOI |
14 | Dezfuli, F.H. and Alam, M.S. (2016), "Seismic vulnerability assessment of a steel-girder highway bridge equipped with different SMA wire-based smart elastomeric isolators", Smart Mater. Struct., 25(7), 075039. DOI |
15 | Dion, C., Bouaanani, N., Tremblay, R. and Lamarche, C.P. (2011a), "Real-time dynamic substructuring testing of a bridge equipped with friction-based seismic isolators", J. Bridge Eng., 17(1), 4-14. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000199. DOI |
16 | Dolce, M., Cardone, D. and Marnetto, R. (2000), "Implementation and testing of passive control devices based on shape memory alloys", Earthq. Eng. Struct. D., 29(7), 945-968. DOI |
17 | Dolce, M., Cardone, D. and Palermo, G. (2007), "Seismic isolation of bridges using isolation systems based on flat sliding bearings", Bull. Earthq. Eng., 5(4), 491-509. DOI |
18 | Dong, Y. and Frangopol, D.M. (2016), "Performance-based seismic assessment of conventional and base-isolated steel buildings including environmental impact and resilience", Earthq. Eng. Struct. D., 45(5), 739-756. https://doi.org/10.1002/eqe.2682. DOI |
19 | Dong, Y. and Frangopol, D.M. (2016), "Probabilistic time-dependent multihazard life-cycle assessment and resilience of bridges considering climate change", J. Perform. Constr. Fac., 30(5), 04016034. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000883. DOI |
20 | Dong, Y. and Frangopol, D.M. (2015), "Risk and resilience assessment of bridges under mainshock and aftershocks incorporating uncertainties", Eng. Struct., 83, 198-208. https://doi.org/10.1016/j.engstruct.2014.10.050. DOI |
21 | Dong, Y., Frangopol, D.M. and Saydam, D. (2013), "Time-variant sustainability assessment of seismically vulnerable bridges subjected to multiple hazards", Earthq. Eng. Struct. D., 42(10), 1451-1467. https://doi.org/10.1002/eqe.2281. DOI |
22 | Fang, C., Wang, W., He, C. and Chen, Y. (2017), "Self-centring behaviour of steel and steel-concrete composite connections equipped with NiTi SMA bolts", Eng. Struct., 150, 390-408. https://doi.org/10.1016/j.engstruct.2017.07.067. DOI |
23 | Fang, C., Yam, M. C., Lam, A.C. and Xie, L. (2014), "Cyclic performance of extended end-plate connections equipped with shape memory alloy bolts", J. Constr. Steel Res., 94, 122-136. https://doi.org/10.1016/j.jcsr.2013.11.008. DOI |
24 | Fang, C., Zheng, Y., Chen, J., Yam, M.C.H. and Wang, W. (2019), "Superelastic NiTi SMA cables: thermal-mechanical behavior, hysteretic modelling and seismic application", Eng. Struct., 183, 533-549. https://doi.org/10.1016/j.engstruct.2019.01.049. DOI |
25 | FEMA, H. (2003), "Multi-hazard loss estimation methodology, earthquake model", Washington, DC, USA: Federal Emergency Management Agency. |
26 | Ghobarah, A. and Ali, H. (1990), "Seismic design of base-isolated highway bridges utilizing lead-rubber bearings", Can. J. Civil Eng., 17(3), 413-422. https://doi.org/10.1139/l90-045. DOI |
27 | Hall, J.F., Holmes, W.T. and Somers, P. (1996), Northridge earthquake of January 17, 1994: reconnaissance report, Earthquake Engineering Research Institute. |
28 | Liu, J.l., Zhu, S., Xu, Y.L and Zhang, Y. (2011), "Displacement-based design approach for highway bridges with SMA isolators", Smart Struct. Syst., 8(2), 173-190. http://dx.doi.org/10.12989/sss.2011.8.2.173. DOI |
29 | Johnson, R., Padgett, J.E., Maragakis, M.E., DesRoches, R. and Saiidi, M.S. (2008), "Large scale testing of nitinol shape memory alloy devices for retrofitting of bridges", Smart Mater. Struct., 17(3), 035018. DOI |
30 | Liang, C. and Rogers, C. (1992), "Design of shape memory alloy actuators", J. Mech. Des., 114(2), 223-230. DOI |
31 | Maragakis, E., Douglas, B. and Vrontinos, S. (1991), "Classical formulation of the impact between bridge deck and abutments during strong earthquakes", Proceedings of the 6th Canadian Conference on Earthquake Engineering, 205-212. |
32 | Mazzoni, S., McKenna, F., Scott, M., Fenves, G. and Jeremic, B. (2007), "OpenSees Command Language Manual", Pacific Earthquake Engineering Research Center, University of California, Berkley, CA, USA. |
33 | Menegotto, M. and Pinto, P.E. (1973), "Method for analysis of cyclically loaded reinforced concrete plane frames including changes in geometry and non-elastic behavior of elements under combined normal force and bending", Proceedings of the IABSE Symposium on Resistance and Ultimate Deformability of Structures Acted on by Well-Defined Repeated Loads, Lisbon, Portugal. |
34 | Qiu, C. and Zhu. S. (2017), "Performance-based seismic design of self-centering steel frames with SMA-based braces", Eng. Struct., 130, 67-82. https://doi.org/10.1016/j.engstruct.2016.09.051. DOI |
35 | Qiu, C. and Zhu. S. (2017), "Shake table test and numerical study of self-centering steel frame with SMA braces", Earthq. Eng. Struct. D., 46,117-137. https://doi.org/10.1002/eqe.2777. DOI |
36 | Qiu, C., Zhang, Y., Li, H., Qu, B., Hou, H. and Tian, L. (2018), "Seismic performance of Concentrically Braced Frames with non-buckling braces: A comparative study", Eng. Struct., 154, 93-102. https://doi.org/10.1016/j.engstruct.2017.10.075. DOI |
37 | Qiu, C., Li, H., Ji, K., Hou, H. and Tian, L. (2017), "Performance-based plastic design approach for multi-story self-centering concentrically braced frames using SMA braces", Eng. Struct., 153, 628-638. https://doi.org/10.1016/j.engstruct.2017.10.068. DOI |