• 한국식품조리과학회지
• /
• 제24권6호
• /
• pp.861-870
• /
• 2008

This study was conducted to evaluate the health status, life style, dietary habits and nutritional status of 44 industry workers that were routinely exposed to unclean environments while consuming 3 major pork dishes 2 times a week for 6 weeks. The health status, life style and dietary habits of the workers were investigated by a survey questionnaire, and the nutritional status was evaluated using the 24-hour recall method. Overall, the subjects reported that their health status was fairly good throughout the year, but that they felt dizziness and fatigue often. In general, the subjects did not exercise regularly and drank alcohol very often. The average daily energy intake increased from 1,708.3 kcal to 1,859.5 kcal without a change in the BMI or WHR when the respondents were fed pork dishes. However, the mineral intake did not differ significantly in response to the consumption of pork, although the Zn intake tended to increase. Moreover, the vitamin $B_1$, niacin, and E intakes increased after consuming pork(p<0.05), while the cholesterol intake decreased from 425.2 mg to 356.7 mg after eating pork(p<0.05). Additionally, both the fat intake and the PUFA intake increased after the consumption of pork with the intake of oleic, linoleic and linolenic acids increasing significantly(p<0.001). Finally, the intake of essential amino acids also increased significantly in response to the consumption of pork(p<0.01). Based on the results, regular consumption of pork dishes improved the nutritional status of industry workers without any adverse effect in terms of the intake of relative fat and cholesterol.

• 간호행정학회지
• /
• 제7권2호
• /
• pp.315-347
• /
• 2001

The purpose of this study was to validate the linkage of nursing diagnosis(NANDA) and Nursing Interventions Classification(NIC) for implementing the Nursing Diagnosis and Nursing interventions in Korea. 36 nurse experts with over the bacculate degree and over 15 years experiences working in tertiary hospitals participated in this study. 5 point Likert scales on each NIC linked 136 NANDA diagnoses were adopted. The results were as follows: 1. In a validity of linkage of nursing diagnosis and nursing interventions classification, the highest score is in 'Chronic low self esteem'(4.66), the lowest score is in 'sensory/Perceptual alterations; Auditory'(3.34) and the average validity score of the total items is 4.27. 2. There was significant differences by educational level and experience in validity score. 3. The nurses who have master degree have higher score than bachelor degree in the diagnoses; 'fatigue', 'health seeking behaviors', 'nutrition: potential for more than body requirements, altered', 'powerlessness'. 4. The nurses with experience over 20 years have higher validity score than less 15 years in 'breast-feeding, effective'. In conclusion, this research indicates that the linkage of NANDA diagnoses and NIC with high validity score can be applied to nursing practice in Korea. And further studies of nursing intervention are needed in Korean culture.

• 근관절건강학회지
• /
• 제18권2호
• /
• pp.270-281
• /
• 2011

Purpose: This study was done to determine if osteoarthritis (OA) patients living in rural Korea would have a benefit from a structured group program focused on self-help strategies. Methods: A hundred and twenty-six patients with OA were recruited from nine Primary Health Care Posts. The experimental group received a 6-week self-help education program while the control group received usual care. T-tests and c2-tests were used to determine the homogeneity between the experimental and control groups. Independent sample t-tests were performed to determine the effect of the treatment program. To guard against such likelihood, the level of significance of t-test was determined by Bonferroni correction within the study constructs. When significant group differences were found in study variables at baseline, analysis of covariances (ANCOVAs) were used for group comparisons of outcome variables. Results: The experimental group reported more significant improvement in fatigue, difficulty with physical activity, depression, quality of life, self-efficacy, and health behaviors than did the control group. The experimental group also showed improvements in range of motion and muscle strength as compared to the control group. Conclusion: A self-help group education program was an effective and powerful strategy to promote physical and psychosocial health in OA patients

• Journal of Computational Design and Engineering
• /
• 제1권1호
• /
• pp.27-36
• /
• 2014

Similar to the essential components of many mechanical systems, the geometrical properties of the teeth of spiral bevel gears greatly influence the kinematic and dynamic behaviors of mechanical systems. Logarithmic spiral bevel gears show a unique advantage in transmission due to their constant spiral angle property. However, a mathematical model suitable for accurate digital modeling, differential geometrical characteristics, and related contact analysis methods for tooth surfaces have not been deeply investigated, since such gears are not convenient in traditional cutting manufacturing in the gear industry. Accurate mathematical modeling of the tooth surface geometry for logarithmic spiral bevel gears is developed in this study, based on the basic gearing kinematics and spherical involute geometry along with the tangent planes geometry; actually, the tooth surface is a parametric surface defined on a parallelogrammic domain. Equivalence proof of the tooth surface geometry is then given in order to greatly simplify the mathematical model. As major factors affecting the lubrication, surface fatigue, contact stress, wear, and manufacturability of gear teeth, the differential geometrical characteristics of the tooth surface are summarized using classical fundamental forms. By using the geometrical properties mentioned, manufacturability (and its limitation in logarithmic spiral bevel gears) is analyzed using precision forging and multiaxis freeform milling, rather than classical cradle-type machine tool based milling or hobbing. Geometry and manufacturability analysis results show that logarithmic spiral gears have many application advantages, but many urgent issues such as contact tooth analysis for precision plastic forming and multiaxis freeform milling also need to be solved in a further study.

• 한국가스학회지
• /
• 제3권3호
• /
• pp.58-64
• /
• 1999

멤브레인 방식의 저장탱크 제작에서 가장 중요한 설계 파라메타인 멤브레인 유니트의 피치에 관한 응력거동 문제를 유한요소법을 사용하여 해석하였고, 이 결과를 기존의 피치설계치수와 비교 검토하였다. 본 연구에서 고려한 링 마디식 멤브레인의 경우 피치의 길이를 어떻게 설정하든지 초대형 탱크의 경우에서는 안전성 문제가 발생하지 않았다. 그러나 반복하중에 의한 피로강도가 문제되는 선박용 멤브레인의 경우에는 피치를 짧게 설계하는 것이 유리하다는 것을 보여주고 있다. 멤브레인 주름의 변형거동을 보면 주름의 높이 방향 변형이 폭에 비하여 $15{\~}50\%$ 정도 더 크게 발생하고, $-162^{\circ}C$의 초저온에 의한 변형은 액압에 의한 변형과 비교할 때 그리 크지는 않음을 보여준다.

• 터널과지하공간
• /
• 제27권3호
• /
• pp.121-131
• /
• 2017

본 연구에서는 암석과 콘크리트의 정적 및 동적 장기강도시험을 통해 이들 재료의 시간 의존적 거동에 대해 연구했으며, 특히 장기강도시험 중 발생한 미소파괴음 신호를 분석하여 장기 안정성 평가에 활용하고자 하였다. 정적 장기강도시험의 경우 임계하 균열성장시험을 활용하여 Mode I과 Mode II에 대한 장기거동과 미소파괴음 발생특성을 분석하였으며, 동적 장기강도시험의 경우, 반복재하 4점 굴곡시험을 통한 장기강도의 한계와 미소파괴음 발생특성을 분석하였다. 미소파괴음 분석결과, 미소파괴음 히트 누적곡선 대 시간에 따른 곡선은 1차, 2차, 3차 구간이 있는 크립곡선의 모양과 유사한 모양을 보였다. 선형구간에 해당하는 미소파괴음 히트 누적곡선의 2차 구간의 기울기와 지연파괴시간과의 로그-로그 관계로부터 암석과 콘크리트의 정적 및 동적 장기 안정성을 평가하는 방안에 대한 가능성을 제시하였다.

• 한국재료학회지
• /
• 제11권2호
• /
• pp.151-154
• /
• 2001

상부전극, Pt, Ir, 그리고 $IrO_2$, 에 따라 수소 열처리전과 후, 그리고 회복열처리시 누설전류특성을 고찰하였다. Pt/PLZT/Pt 케페시터는 수소열처리 후에 다시 회복열처리를 수행하면 완전히 이력곡선의 회복을 보이며 또한 피로특성도 거의 회복 된다. Pt과 IrO$_2$ 상부전극의 경우의 진 누설전류 특성은 열처리조건에 관계없이 강한 시간 의존성을 갖는 space-charge influenced injection모델에 적합하다. 반면에 Ir 상부전극의 경우는 Ir과 PLZT 사이의 계면에 헝성된 전도성 상인 $IrO_2$로 인해 높은 누설전류 밀도를 보이면서 relaxation current 영역이 없이 steady state 영역을 보이는, 주로 Schottky barrier 모델에 의해 설명된다.

• Earthquakes and Structures
• /
• 제17권2호
• /
• pp.221-232
• /
• 2019

Material non-linearity of Reinforced Concrete (RC) framed structures is studied by modelling concrete using the Concrete Damage Plasticity (CDP) theory. The stress-strain data of concrete in compression is modelled using the Hsu model. The structures are analyzed using a finite element approach by modelling them in ABAQUS / CAE. Single bay single storey RC frames, designed according to Indian Standard (IS):456:2000 and IS:13920:2016 are considered for assessing their maximum load carrying capacity and failure behavior under the influence of gravity loads and lateral loads. It is found that the CDP model is effective in predicting the failure behaviors of RC frame structures. Under the influence of the lateral load, the structure designed according to IS:13920 had a higher load carrying capacity when compared with the structure designed according to IS:456. Ultra High Performance Fiber Reinforced Concrete (UHPFRC) strip is used for strengthening the columns and beam column joints of the RC frame individually against lateral loads. 10mm and 20mm thick strips are adopted for the numerical simulation of RC column and beam-column joint. Results obtained from the study indicated that UHPFRC with two different thickness strips acts as a very good strengthening material in increasing the load carrying capacity of columns and beam-column joint by more than 5%. UHPFRC also improved the performance of the RC frames against lateral loads with an increase of more than 3.5% with the two different strips adopted. 20 mm thick strip is found to be an ideal size to enhance the load carrying capacity of the columns and beam-column joints. Among the strengthening locations adopted in the study, column strengthening is found to be more efficient when compared with the beam column joint strengthening.

• 대한금속재료학회지
• /
• 제47권7호
• /
• pp.440-446
• /
• 2009

Co base superalloys have been widely used for the parts of gas turbine due to their excellent strength, thermal fatigue, oxidation resistance and weldability at high temperature. In this study, directional solidifications were carried out at various solidification rates, including $0.5{\sim}300{\mu}m/s$ in the Co base superalloy FSX-414. The cellular interface were formed at a low solidification rate, $1{\mu}m/s$, and the dendritic interface was found at higher solidification rates, $5{\sim}300{\mu}m/s$. As the spacing of dendrite structure decreased, the size and spacing of eutectics decreased. Dendrite arm spacing decreased with increasing solidification rates and temperature gradient. It was interesting to find the $M_{23}C_{6}$ eutectic microstructure formed between $\gamma$ dendrites. Composition analysis showed that Cr and W were segregated severely between the dendrites, which resulted in the formation of Cr-rich $M_{23}C_{6}$ and W-rich MC carbides.

• Journal of Ginseng Research
• /
• 제46권5호
• /
• pp.657-665
• /
• 2022

Background: Sarcopenia is a new and emerging risk factor aggravating the quality of life of elderly population. Because Korean Red Ginseng (RG) is known to have a great effect on relieving fatigue and enhancing physical performance, it is invaluable to examine its potential as an anti-sarcopenic drug. Methods: Anti-sarcopenic effect of non-saponin fraction of Korean Red Ginseng (RGNS) was evaluated in C2C12 myoblasts treated with C2-ceramide to induce senescence phenotypes, and 22-month-old mice fed with chow diet containing 2% RGNS (w/w) for 4 further months. Results: The RGNS treatment significantly alleviated cellular senescence indicated by intracellular lipid accumulation, increased amount of lysosomal β-galactosidase, and reduced proliferative capacity in C2C12 myoblasts. This effect was not observed with saponin fraction. In an aged mouse, the 4-month-RGNS diet significantly improved aging-associated loss of muscle mass and strength, assessed by the weights of hindlimb skeletal muscles such as tibialis anterior (TA), extensor digitorum longus (EDL), gastrocnemius (GN) and soleus (SOL), and the cross-sectional area (CSA) of SOL muscle, and the behaviors in grip strength and hanging wire tests, respectively. During the same period, an aging-associated shift of fast-to slow-twitch muscle in SOL muscle was also retarded by the RGNS treatment. Conclusions: These findings suggested that the long-term diet of RGNS significantly prevented aging-associated muscle atrophy and reduced physical performance, and thus RGNS has a strong potential to be developed as a drug that prevents or improves sarcopenia.