• Journal of Korea Society of Waste Management
• /
• v.34 no.7
• /
• pp.685-696
• /
• 2017

This study focuses on computational particle fluid dynamics (CPFD) modeling for the fast pyrolysis of biomass in a conical spouted bed reactor. The CPFD simulation was conducted to understand the hydrodynamics, heat transfer, and biomass fast pyrolysis reaction of the conical spouted bed reactor and the multiphase-particle in cell (MP-PIC) model was used to investigate the fast pyrolysis of biomass in a conical spouted bed reactor. A two-stage semi-global kinetics model was applied to model the fast pyrolysis reaction of biomass and the commercial code (Barracuda) was used in simulations. The temperature of solid particles in a conical spouted bed reactor showed a uniform temperature distribution along the reactor height. The yield of fast pyrolysis products from the simulation was compared with the experimental data; the yield of fast pyrolysis products was 74.1wt.% tar, 17.4wt.% gas, and 8.5wt.% char. The comparison of experimental measurements and model predictions shows the model's accuracy. The CPFD simulation results had great potential to aid the future design and optimization of the fast pyrolysis process for biomass.

• Journal of Power System Engineering
• /
• v.6 no.3
• /
• pp.64-70
• /
• 2002

A fast decoupled algorithm for time domain simulation of power electronics circuits is presented. The circuits can be arbitrarily configured and can incorporate feedback amplifier circuits. This simulation algorithm is performed for the input series output parallel connected 2 switch forward converter. Steady state and large signal transient responses due to a step load change are simulated. The simulation results are verified through experiments.

• Communications for Statistical Applications and Methods
• /
• v.8 no.1
• /
• pp.257-269
• /
• 2001

The simulation is used to estimate an overflow probability in a stable parallel network with coupled inputs. Since the general simulation needs extremely many trials to obtain such a small probability, the fast simulation is proposed to reduce trials instead. By using the Cramer’s theorem, we first obtain an optimally changed measure under which the variance of the estimator is minimized. Then, we use it to derive an importance sampling estimator of the overflow probability which enables us to perform the fast simulation.

• Journal of the Korea Society for Simulation
• /
• v.11 no.1
• /
• pp.1-10
• /
• 2002

IETF proposed Fast Handover mechanism tn reduce the latency during which the mobile node is effectively dusconnected from the Internet. In this paper, we propose three buffering strategies and a bicasting strategy to resolve packet loss and packet disordering problems in Fast Hangover mechanism. Through Java-based simulation we show thats, packet loss and disordering problems have been resolved by our proposal. As the result the buffering and bicasting strategies can reduce the handover delay caused by packet loss and packet disordering, in addition.

• Communications for Statistical Applications and Methods
• /
• v.7 no.2
• /
• pp.499-511
• /
• 2000

We consider a stable tandem network which consists of two M/M/1 nodes and study the probability that the total backlog exceeds a large level N. Since the excessive backlog is a rare event, it is difficult to estimate this probability efficiently by using the crude Monte Carlo simulation. Instead we perform the ;$h$-transform proposed by McDonald(1999) to obtain the twisted network, in which the node with the larger load is overloaded. Then we use it to run the fast simulation.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.3
• /
• pp.213-220
• /
• 2007

As the equipments with the fast load characteristics become popular, a onboard generator should satisfy the fast response characteristics. This paper describes the modeling, simulation and experiment of the homo-polar generator developed for the fast load. The simulation model of a homo-polar generator with input limiter is developed, and the optimal gain to improve the response characteristics can be determined by simulation and analysis. The improved bandwidth and stability of the developed generator with optimal gain are verified by simulation and experiment.

• Nuclear Engineering and Technology
• /
• v.51 no.5
• /
• pp.1436-1443
• /
• 2019

A fast gamma-ray dose rate assessment method for complex geometries based on stylized model reconstruction and point-kernel method is proposed in this paper. The complex three-dimensional (3D) geometries are imported as a 3DS format file from 3dsMax software with material and radiometric attributes. Based on 3D stylized model reconstruction of solid mesh, the 3D-geometrical solids are automatically converted into stylized models. In point-kernel calculation, the stylized source models are divided into point kernels and the mean free paths (mfp) are calculated by the intersections between shield stylized models and tracing ray. Compared with MCNP, the proposed method can implement complex 3D geometries visually, and the dose rate calculation is accurate and fast.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.24 no.1
• /
• pp.79-84
• /
• 2020

In this article, we implement a recently developed fast Monte Carlo simulation (MCS) for pricing equity-linked securities (ELS), which is most commonly issued autocallable structured financial derivative in South Korea, on the mobile platform. The fast MCS is based on Brownian bridge technique. Although mobile platform devices are easy to carry around, mobile platform devices are slow in computation compared to desktop computers. Therefore, it is essential to use a fast algorithm for pricing ELS on the mobile platform. The computational results demonstrate the practicability of Android application implementation for pricing ELS.

• Journal of computational fluids engineering
• /
• v.19 no.4
• /
• pp.29-36
• /
• 2014

A computational study of a thermal striping in the upper plenum of PGSFR(Prototype Generation-IV Sodium-cooled Fast Reactor) being developed at the KAERI(Korea Atomic Energy Research Institute) is presented. The LES(Large Eddy Simulation) approach is employed for the simulation of thermal striping in the upper plenum of the PGSFR. The LES is performed using the WALE (Wall-Adapting Local Eddy-viscosity) model. More than 19.7 million unstructured elements are generated in upper plenum region of the PGSFR using the CFX-Mesh commercial code. The time-averaged velocity components and temperature field in the complicated upper plenum of the PGSFR are presented. The time history of temperature fluctuation at the eight locations of solid walls of UIS(Upper Internal Structure) and IHX(Intermediate Heat eXchanger) are additionally stored. It has been confirmed that the most vulnerable regions to thermal striping are the first plate of UIS. From the temporal variation of temperature at the solid walls, it was possible to find the locations where the thermal stress is large and need to assess whether the solid structures can endure the thermal stress during the reactor life time.

• Communications for Statistical Applications and Methods
• /
• v.14 no.2
• /
• pp.287-299
• /
• 2007

We consider a multiclass queue where queued customers are served in their order of arrival at a rate which depends on the customer type. By using the asymptotic results obtained by Dabrowski et al. (2006) we calculate the sharp asymptotics of the stationary distribution of the number of customers of each class in the system and the distribution of the number of customers of each class when the total number of customers reaches a high level before emptying. We also obtain a fast simulation algorithm to estimate the overflow probability and compare it with the general simulation and asymptotic results.