• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.121-121
• /
• 2010

As the industrial technology is getting higher, the pulsed power technology is required from various fields such as thermonuclear fusion energy sources, military applications, electric power distribution, and a variety of new specialized needs. This technology deals with the generation of very high power electromagnetic pulses through fast switching. We fabricated a pulsed power generator, named EMD pulse generator, by using Marx circuit with 200 kV high, 50 ns fast rise time. In this paper, we described about an effect of stray capacitance of coaxial Marx generator, EPG-AM200k, and a comparing the results of experiments and circuit analysis.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.3
• /
• pp.43-48
• /
• 2020

The demand for stable plasma has been on the rise because of the increased delivery power amount in the chamber for improving productivity, and fast and accurate plasma impedance matching become a crucial performance measure for radio frequency (RF) power system in semiconductor manufacturing equipment. In this paper, the overall impedance matching was understood, and voltage and current values were extracted with voltage - current (VI) probe to measure plasma impedance in real-time. Actual matching data were analyzed to derive calibration coefficient for V and I measurements to understand the characteristics of VI probe, and we demonstrated the tendency of RF impedance matching according to changes in load impedance. This preliminary empirical research can contribute to fast RF matching as well as advanced equipment control for the next level of detailed investigation on embedded system based-RF matching controller.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.2
• /
• pp.113-120
• /
• 2002

This paper describes characteristics of transient voltage waveforms caused by human electrostatic discharges(ESDs). For purpose of achieving the statistics on the meaningful amplitude and initial slope for transient ESD voltage waveforms, transient voltages due to human ESDs in various conditions were observed. A voltage measuring system with a wide bandwidth from DC to 400[MHz] was employed. ESD voltage waveforms are approximately the same as ESD current waveforms. Also the simulated results, which are calculated by the reposed equivalent circuit, are closely similar to the measured voltage waveforms. ESD voltage waveforms are strongly dependent on the approach speed and material of intruder, a fast approach causes ESD voltage waveform with a steep rise time than for a slow approach. The voltage waveforms from dialect finger ESDs have a relatively long rise time of 10∼30[ns], but their peaks are low. On the other side ESD voltage waveforms causer by screwdriver with insulating handle have a steep slope with a very short, less than 1[ns] rise time, but their initial spikes are extremely high The obtained results in this work would be applied to solve ESD problems for low voltage and small current electronic devices.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1297-1300
• /
• 2008

A conventional linear accelerator system requires a flat-topped pulse with less than ${\pm}$ 0.5% ripple to meet the beam energy spread requirements and to improve pulse efficiency of RF systems. A pulse transformer is one of main determinants on the output pulse voltage shape. The pulse transformer was investigated and analyzed with the pulse response characteristics using a simplified equivalent circuit model. The damping factor ${\sigma}$ must be >0.86 to limit the overshoot to less than 0.5% during the flat-top phase. The low leakage inductance and distributed capacitance are often limiting factors to obtain a fast rise time. These parameters are largely controlled by the physical geometry and winding configuration of the transformer. A rise time can be improved by reducing the number of turns, but it produces larger pulse droop and requires a larger core size. By tradeoffs among these parameters, the high-voltage pulse transformer with a pulse width of 10 ${\mu}s$, a rise time of 0.84 ${\mu}s$, and a pulse droop of 2.9% has been designed and fabricated to drive a klystron which has an output voltage of 284 kV, 30-MW peak and 60-kW average RF output power. This paper describes design optimization of a high-voltage pulse transformer for high-power pulsed applications. The experimental results were analyzed and compared with the design. The design and optimal tuning parameter of the system was identified using the model simulation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.10
• /
• pp.62-68
• /
• 2008

This paper presents the transient and conventional grounding impedance behaviors of deeply-driven ground rods associated with the injection point of impulse currents. The transient grounding impedance strongly depends on the length of deeply-driven ground rod and the rise time and injection point of impulse currents, and the intrinsic inductance of ground rod has a significant affect on the transient grounding impedance of grounding system in fast rise time ranges. The reduction of inductance is decisive to improve the impulse impedance behaviors of deeply-driven ground rods. It is effective that grounding conductor is connected to the top of the ground rod as short as possible.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.677-681
• /
• 2014

A high voltage pulse generator was fabricated to radiate ultrawide band electromagnetic pulse. A coaxial type of Blumlein pulse forming line is employed to produce a pulse of high voltage (>300 kV) and short pulse duration (~5 ns). A helical strip/wire type of air-cored pulse transformer was used to charge the Blumlein pulse forming line up to more than 300 kV. A peaking switch is essential to make the pulse rise time as fast as possible. Typically, the rise time is ~500 ps. The output pulse of the generator is radiated into air through an exponentially tapered TEM horn antenna. The electric field intensity of a radiated pulse was measured as a function of the distance from the transmitting horn as well as the output voltage of the peaking switch. The peak-to-peak value of the electric field intensity at 10 m from the TEM antenna was~100 kV/m.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.1
• /
• pp.11-17
• /
• 2001

In drilling of composite laminates, it is important to minimize of reduce occurrences of delaminations. In particular, a peel -up delamination at entrance and push-up delamination at exit are common. Deleaminations may by avoided by regulating the drill thrust force can be controlled by adjusting the feedrate of the drill. Dynamics involved in drilling of composite laminates is time varying and nonlinear. In this paper, a fuzzy logic model and control strategy are proposed. Simulation results show that the fuzzy model can describe the nonlinear time-varying process well. The fuzzy controller realizes a fast rise time and a little overshoot of drilling force.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.8
• /
• pp.889-897
• /
• 1999

This paper deals with a problem searching a target transfer function to meet the time-domain specifications for feedback system with given plant transfer function. For the Type I system, we first define three forms of transient response to unit step input, which are named by F, M, S-type. These are charaacterized as follows ; F-type has fast initial response and slow approach to the steady sate after reaching at 90% of the steady state value, S-type has slow initial response but fast approach to the steady state, and M-type is denoted by highly smooth response between F-type and S-type. Three prototypes corresponding to each form are proposed, time. For the order $n{\geq}4$, after determining admissible root structures of target characteristic polynomials empirically and expressing such polynomial coefficients by using special parameters ${\gamma}_i$ and $\epsilon$, the optimal prototypes that minimize the integral of the squared of the modified errors(ISME) have been obtained. Since the step responses of these prototypes have almost same wave forms irrespective to the order, the desired settling time or the rise time can be converted into the equibalent time constant $\tau$ and thus it is easy to obtain a target transfer function. It is shown through a design example that the present prototype is very useful for meeting the time-domain specifications and has been compared with different methods with a viewpoint of pertinence.

• Korean Journal of Geomatics
• /
• v.3 no.1
• /
• pp.73-79
• /
• 2003

To manage national territory and cadastral data efficiently, accuracy and cost-efficiency in cadastral boundary surveying is inevitable. The efficient management of cadastral data is a very important element in national land management. Survey techniques are being introduced. Recently, improvements in survey techniques have been made with the development of satellite surveying, Allowing accurate and fast surveys. If we can calculate the output accurately in real-time in survey fields, it will open a new method in cadastral detail surveying. According to the classification on Law of cadastral surveying, Cadastral surveying can be divided into cadastral control point surveying and cadastral detail surveying. The control point survey can be divided into cadastral triangulation surveying and cadastral traverse surveying. The detailed survey is usually perform by plane surveying. Among these, cadastral detail surveying will be reviewed in this study. In this study, the combination of the satellites, such as US managed GPS and Russian managed GLONASS was used. In the satellite survey in downtown, data interruption symptoms arose(according to the mask angle of the satellite). Therefore; we combined the satellites to get date more accurately. A block of Haewoondae New City in Busan, Korea, which has Numerical Cadastral Law was selected as the sample area for this study. Block II and III are surrounded by high rise apartments. One side of Block I and IV is level ground and the other side is full of high rise apartments. Especially, Block II is surrounded by high rise apartment houses with 20 meters width. In the results of the study Block II did not satisfy the allowable precision, while Block I, II and IV satisfied the allowable precision of the enforcement regulations of Cadastral Law. Therefore, it is judged that the traditionally used Total Station method should be used for supplementary survey on Block II, in stead.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.645-649
• /
• 2007

Ground systems flow fault currents into the ground, and suppress Ground Potential Rise (GPR) by the current. In this paper, we designed and fabricated a surge impedance meter to analyze the ground impedance in wide frequency ranges. The meter consists of a surge generator, a high speed sample/hold (S/H) circuit and an associated electronics. The surge generator produces surge voltage up to 5kV in ranges of $50\sim500ns$. Field tests were carried out to evaluate the surge impedance meter at a driven-rod ground system. The results showed that surge impedance of ground systems should be measured by various fast surge waveforms, since the impedance increases as the rise time of applied voltage increases.