• Journal of KIISE:Computer Systems and Theory
• /
• v.28 no.12
• /
• pp.660-673
• /
• 2001

In Video-on-Demand (VoD) servers, disk throughput is an important system design parameter because it is directly related to the number of user requests that can be served simultaneously. In this paper, we propose an efficient periodic request grouping scheme for disk array-based VoD servers that reduces the disk seek time, thus improving the disk throughput of VoD disk arrays. To reduce the disk seek time, the proposed scheme groups the periodic requests that access data blocks stored in adjacent regions into one, and arranges these groups in a pre-determined order (e.g., in left-symmetric or right-symmetric fashion). Our simulation result shows that the proposed scheme reduces the average disk bandwidth required by a single video stream and can serve more user requests than existing schemes. For a data block size of 192KB, the number of simultaneously served user requests is increased by 8% while the average waiting time for a user request is decreased by 20%. We also propose an adaptation technique that conforms the proposed scheme to the user preference changes for video streams.

• Journal of Preventive Medicine and Public Health
• /
• v.39 no.3
• /
• pp.221-228
• /
• 2006

Objectives: The purpose of this study was to shed further light on the effect of modifiable health behavior risk factors on dependence in activities of daily living, defined in a multidimensional fashion. Methods: The study participants were 10,278 middle aged Americans in a longitudinal health study, the Health and Retirement Survey (HRS). A multi-stage probability sampling design incorporating the effect of population sizes (Metropolitan and non-metropolitan), ethnicity (the non- Hispanic White, the Hispanic, and the Black), and age (age 51-61) was utilized. Basic Activities of Daily Living (ADL) were measured using five activities necessary for survival (impairment in dressing, eating, bathing, sleeping, and moving across indoor spaces). Explanatory variables were four health behavior risk factors included smoking, exercise, Body Mass Index (BMI), and alcohol consumption. Results: Most participants at baseline were ADL independent (1992). 97.8% of participants were independent in all ADL's at baseline and 78.2% were married. Approximately 27.5% were current smokers at baseline, and the subjects reported moderate or heavy exercise were 74.8%. All demographic characteristics and behavioral risk factors were significantly associated with the ADL status at Wave 4 except alcohol consumption. Risk behaviors such as current smoking, sedentary life style and high BMI at Wave 1 were associated with ADL status deterioration; however, moderate alcohol consumption tended to be more related to better ADL status than abstaining at Wave 4. ADL status at Wave 1 was the strongest factor and the next was exercise and smoking affecting ADL status at Wave 4. People who were in ADL dependent at Wave 1 were 15.17 times more likely to be ADL dependent at Wave 4 than people who were in ADL independent at Wave 1. Concerning smoking cigarettes, people who kept only light exercise or sedentary life style at Wave 1 were 1.70 times more likely to be died at Wave 4 than the people who did not smoke at Wave 1. Conclusions: All demographics and health behaviors at wave 1 had consistently similar OR trends for ADL status to each other except alcohol consumption. Smoking and exercise in health behaviors, and age and gender in demographics at Wave 1 were significant factors associated with ADL group separation at Wave 4.

• The Journal of the Korea Contents Association
• /
• v.16 no.2
• /
• pp.186-199
• /
• 2016

The shoe last which is the framework for the shoemaking is intensively combined with the 3D data and technologies. International shoe companies have already commercialized 3D printing technology in producing the shoe, but domestic shoe companies are still in their early stages. This study used the 3D scanning, 3D modeling and 3D printing of the high-technology to make the shoe last. This 3D producing processes should be helpful in building competitiveness in domestic shoe industry. The 3D foot scanning data of men in 30s(n=200) were collected in SizeKorea(2010). The basic statistics, factor and cluster analysis were performed. They were categorized in 3 groups by 3D foot measurement data, and the standard models were selected in each group. The cross sections in XY, YZ and XZ planes sliced from 3D scan data of the standard model were used in the sketches of the 3D shoe last modeling. The 3D shoe last was modeled by Solidworks CAD and printed by MakerBot Replicator2; a desktop 3D printer. This research showed the potential for utilization of 3D printing technology in the domestic shoe industry. The 3D producing process; 3D scanning, 3D modeling and 3D printing is expected to utilized widely in the fashion industry within the nearest future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.640-649
• /
• 2018

This study analyzed the consumer awareness of cycling wear using web mining, one of the big data analysis methods. For this, the texts of postings and comments related to cycling wear from 2006 to 2017 at Naver cafe, 'people who commute by bicycle' were collected and analyzed using R packages. A total of 15,321 documents were used for data analysis. The keywords of cycling wear were extracted using a Korean morphological analyzer (KoNLP) and converted to TDM (Term Document Matrix) and co-occurrence matrix to calculate the frequency of the keywords. The most frequent keyword in cycling wear was 'tights', including the opinion that they feel embarrassed because they are too tight. When they purchase cycling wear, they appeared to consider 'price', 'size', and 'brand'. Recently 'low price' and 'cost effectiveness' have become more frequent since 2016 than before, which indicates that consumers tend to prefer practical products. Moreover, the findings showed that it is necessary to improve not only the design and wearability, but also the material functionality, such as sweat-absorbance and quick drying, and the function of pad. These showed similar results to previous studies using a questionnaire. Therefore, it is expected to be used as an objective indicator that can be reflected in product development by real-time analysis of the opinions and requirements of consumers using web mining.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.151-157
• /
• 2017

Recently, the retail industry has created efficient store operations, and has differentiated customer service through the future store. The intelligence of these stores is being applied by using technologies such as the Internet of Things (IoT), and the business process is being improved through this. The process also focuses on efficient store operations and service developments to provide customers with shopping convenience. The change in trends in the industry means that domestic distribution has already reached maturity. Even in countries where retail industries are mature, such as the U.S. and Europe, recent trends are moving toward maximizing operational efficiency and customer service. The reason is that many retailers have already reached saturation and survived the competition. This paper is a study of a drive-through service for automation and efficiency in receiving service after ordering by a customer of the distribution store. When ordering a product being purchased by a customer, the product picking process is done in a timely fashion through a picking scheduling agent. When the customer enters the store parking lot, a service supports the entry of information and finding a parking place so the customer can quickly pick up the goods. The proposed service can be applied to a retail store drive-through system, the distribution store's delivery system, the digital picking system, and indoor/outdoor large parking management systems, and it is possible to provide one-dimensional customer service through the application of IoT technology.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.493-503
• /
• 2018

Recently, as living standards have improved, many people are becoming more interested in health, and self-training is increasing through exercise to prevent and manage pre-illness. In general, an imbalance of muscles causes asymmetry of posture, which can cause various diseases by accompanying an adjustment force, circulation action, displacement of internal organs, etc.. In this study, the development of fitness software that can be self - training among smart wears has attracted considerable attention in recent years. In this study, a technology was proposed for the commercialization of self - trainer fitness wear by a simulation through Android - based applications. Self - trainer fitness software was developed by combining a conductive polymer, fashion design, sewing, and electric and electronic technology to monitor the unbalance of the muscles during exercise and make smart wear that can calibrate the asymmetry by oneself. In particular, a polymer sensor was fabricated by deriving the optimal MWCNT concentration, and the electrode signal was collected by attaching the electrode to the optimal position, where the electrode signal line using the conductive fiber was designed and attached to collect the signal. A signal module that converts the bio-signals collected through electrical signal conversion and transmits them using Bluetooth communication was designed and manufactured. Self-trainer fitness software that can be commercialized was developed by combining noise cancellation with Android-based self-training application using a software algorithm method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.93-98
• /
• 2017

The fixing behaviors of raw silk yarns treated with melamine and formaldehyde at a molar ratio of 1:3 for trimethylolmelamine were investigated. Sericin was fixed during the fixing process, but a part of sericin I was removed simultaneously by hot water. The weight losses by fixing and the degumming losses by degumming greatly decreased with increasing concentrations of melamine and formaldehyde. The silk yarns fixed with 0.011 M melamine and 0.033M formaldehyde were significantly degummed due to the insufficient fixation of sericin and the alkaline hydrolysis of sericin by sodium carbonate during the degumming process. On the other hand, the silk yarns fixed with 0.055M melamine and 0.165M formaldehyde were degummed slightly (the degumming losses of 3-8%) due to the strong fixation of sericin, which might result from the many cross-linkages between the sericin I molecules, which were formed by trimethylolmelamine. Those fixed with the fixing solution containing 15% owf softener showed the lowest weight and degumming losses because under the condition of 15% owf softener, the cation of the softener can effectively form ionic bonds with the negatively charged side chain of aspartic acid in sericin. In addition, van der Waals' forces may be also formed between the hydrophobic tail of the softener and the hydrophobic region of sericin, which may help inhibit the removal of sericin I.

• Polymer(Korea)
• /
• v.27 no.2
• /
• pp.106-112
• /
• 2003

Poly(trimethylene terephthalate)(PTT) fibers were treated by passing on the plate heater to study the annealing effect on the change of morphological structure and physical properties. In the X-ray diffraction curves of PTT annealed, a sharp peak at 2$\theta$=15.6$^{\circ}$ appeared and the peak intensity became stronger with the increase of annealing temperature and time. This peak was based on the (010) plane of PTT crystals. The crystallinity determined by density measurement was also increased by annealing. With the increases of temperature and time, the dynamic viscoelastic behaviors were shown to be a large reduction in T(tan $\delta$$_{max}$). The birefringence and $T_g$ were also reduced, but the melting temperature was the same. These results mean that the molecular chains in armorphous region are transfered into the crystalline legion, making the remained chains relaxed during annealing at tensionless state.

• Journal of Korean Home Economics Education Association
• /
• v.28 no.1
• /
• pp.87-104
• /
• 2016

The purpose of this study is to suggest a pedagogic direction of home economics education that can form body image which organize self-concept of adolescents positively. To achieve this purpose, the study suggested a body image formation model of adolescents that can be applied to home economics education, and based on this formation model, analyzed contents on body image of current 12 textbooks of home economics education. The main results of this study are summarized as follows: First, to analyze textbook through body image formation model of adolescents, educational contents about body image were categorized into 4 constructs with 8 sub-categories. Second, we found the current textbooks about the child and family life field, food and dietary life field, and clothing life, are handling topics regarding body image formation model of adolescents, such as concepts and components of body image and antecedents and outcomes of body image. We conclude that although the current textbooks handles contents on body image of adolescents, those contents are sporadically presented across the three fields without an integrated perspective. Home Economics, as an entity of educating adolescents' self-esteem through daily life activities, needs to have a topic-oriented approach in developing a curriculum.

• Journal of the Korean Home Economics Association
• /
• v.44 no.10
• /
• pp.47-55
• /
• 2006

The purpose of this study was to analyze and compare the color characteristics of preferred clothing textiles of college students. One hundred nine male and female college students were evaluated for their preference to clothing textiles in previous research. To analyze the color characteristics, spectral data were measured. Color, color tone, and values of $L^*,\;a^*,\;b^*$ according to clothing item were compared. In addition, chromaticity diagram was drawn. The results of this study were as following. 1. The color of the shirts textile that college student preferred most in spring/fall was PB(purple blue) color, lt(light) tone. In general, the preferred textiles for shirts represented a simple color that is close to achromatic color with light and soft shade. The color of the blouse textiles that college student preferred most was PB color, d(dull), g(grayish) and W(white) tone. 2. The most frequently shown color of upper garment was PB, followed by Y(yellow) for shirt and R(red) for blouses. College students prefer a simple color which is close to achromatic color, and a light and soft color was preferred for shirts fabric and they preferred various, medium shades, but closer to pure colors for blouses because college students tend to consider that the aesthetic side is important and usually wear blouses less often than shirts. 3. For slacks, the colors of the preferred textiles were B(blue), PB color and lt.g.(light grayish), g, d and bk(black) tone. Therefore, the preferred textiles for slacks represented simple colors such as bluish or close to achromatic color with light or dark shade. For skirt, YR(yellow red), PB color and lt.g, lt, d. tone were preferred. Therefore, soft light or moderately toned various colors that are close to pure color were especially preferred for skirts. 4. The colors of preferred fabrics for slacks and skirts differed. The colors of the preferred fabrics for slacks were mostly cold color, whereas those of skirts were mostly warm color. And college students preferred various, medium shaded and closer to pure colors for skirts because they tend to consider the aesthetic side as being important. 5. The pattern of preferred fabrics was mostly solid, regardless of clothing item, and melange was the second most preferred pattern. 6. Through the analysis of $L^*,\;a^*,\;b^*$ values, shirt and blouse textiles showed higher $L^*$ value than that of slacks and skirt. The preferred textiles of college students were generally close to achromatic color because the values of $a^*$, and $b^*$ were very low, as confirmed by the result of the chromaticity diagram.