• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.6
• /
• pp.317-322
• /
• 2002

We have studied the sawing sach as the round brilliant cut, cushion barion cut and marquise cut. Through this study, we could examined the rate of waste from the grinding work, and find a solution for many problems which could be derived from the grinding work. We could reduce the rate of waste by this study about sawing technique; 2.5 % for round brilliant cut, 2.5 % for cushion barion cut and 5.5 % for marquise cut.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.2
• /
• pp.8-15
• /
• 1990

This study was carried out to investigate the wood qualities for the end-use development of sycamore (Platanus occidentalis L.) grown in Korea. The results obtained were as follows: 1. The average length of wood fibers was l.56mm and the average width of annual rings was 9.5mm. It had very fast growth rate. 2. The specific gravity in air-dry was 0.66. The shrinkage and water absorption were relatively large. The shear and impact strengthes were very strong, while the compressive, tensile, and bending strengthes were weak in comparison to it's specific gravity. 3. The contents of ash, holocellulose, lignin were relatively high 0.74%, 83.08%, 28.79%, but that of pentosan was low 18.53%. 4. The expected uses of sycamore wood are plywood. fancy veneer, small furniture, musical instrument, door and window frame, tool handels, boxes, etc.

• Korean Journal of Human Ecology
• /
• v.13 no.5
• /
• pp.777-785
• /
• 2004

We intend to analyze reasons for low acceptability of protective clothing in pesticide-spraying farmers in Korea, and to use the information for designing new clothing with better acceptability. To understand the attitude of farmers toward wearing protective clothing during spray, a survey was performed on 256 farmers. It is evident that the stress, which is caused by inadequate body temperature regulation, and its accompanying physiological responses are two of the leading factors for the low acceptability of protective clothing. Although the cost of clothing is not an important factor currently, low cost clothing is desirable in the future. Fancy of design is unimportant for new clothing. The results are discussed in conjunction with a desirable research focus for new types of protective clothing. Efforts should be made to ameliorate thermal stress through protective material development and garment design.

• Fashion & Textile Research Journal
• /
• v.8 no.4
• /
• pp.382-390
• /
• 2006

In the 21st century, men is expressing the femininity instead of the muscularity. And a boundary line between a man and a woman is not clear any more. A man is interested in the lifestyle of a woman, and he imitates her fashion styles, hairstyles, accessories, make-up, and plastic surgery. He is called as "Metrosexual" or "Crossexual". Nowadays, men as well as women can satisfy the wants for beauty. The beautiful appearance of a man has a good impact on the social relationships. The feminizing trends are generally accepted and are shown in the silhouettes, details, colors, fabrics and accessories. The feminizing trends in men's knitwear are shown in the various items. They have slim silhouettes and feminine details. Also they are made of bulky yarns or fancy yarns, and various stitches for texture effects. The most outstanding changes in men's knitwear are the vivid colors and flower patterns.

• The Korean Journal of Pain
• /
• v.5 no.1
• /
• pp.57-62
• /
• 1992

Bee Venom therapy, as bee honey has long contributed to human life as a valuable fancy food since human history began. It can be found in the literature back up to a thousand years as a form of therapy for management of apin of various origin. Even to the present, there are some physicians and medical personnel who believe in the effects of bee sting therapy throughout the world. However Bee Venom therapy remains somewhat controversial and there are very few controlled studies available to guide clinical practice. We administered apitherapy(Bee venom therapy) against pain of musculoskeletal origin in thirty one patients from october 1988 to october 1990 and got successful results in seventy one percent of patients. Our results suggest that Bee Venom therapy can be one of the methods for conquering pain caused by true inflamation.

• Journal of Distribution Research
• /
• v.3 no.1
• /
• pp.55-69
• /
• 1998

One of the urgently-needed retail strategies is to lower the labor expenses of the store. For this purpose, more stores are developing new, fancy techniques to make consumers work for the stores without paying them. Examples include self-service system, consumer suggestion system and others. These are called customer voluntary performance. Intiated by Bettencourt(1997), customer voluntary performance(CVT) becomes an important concept in modern retailing. This paper applies three dimensions of CVP (loyalty, cooperation, participation) to the setting of Consumer Complaint Intentions(CCI). Similar to CVP, CCI has three dimensions in itself (voice, private, third party). The major focus of this empirical research is on finding the possible relationships between three dimensions of CVP and three dimensions of CCI. The results show that participation is positively related to the levels of consumer complaint intentions, whereas loyalty is negatively related to the levels of them. This implies that the weak tactic of CVP(loyalty) may reduce the levels of complaint, but strong one(participation) may not be so. More conceptual and empirrical studies are urgently needed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.197-202
• /
• 1999

The properties of surface-glossing of exposed concrete with the kinds of form materials and form oil are investigated under various slump value. According to the experimental results, surface-glossing has high value with the increase of slump. In case of surface-glossing with the kind of the form, the form made of acryl has the best performance among the form kinds tested in this experiment. The order of surface-glossing is follows ; fancy plywood > metal form > plywood. Water solution type form oil has better performance in surface-glossing than oil solution type form oil. Also, surface-glossing get worse with the elapse of age.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.85-88
• /
• 2000

This paper is dealt with the ways of the improvement of the surface glossing of exposed concrete through the construction field test. The field applied in this test is located at Daechon, Chungnam province where the service training institute of Chongju university has been built. The flowing method is applied. According to the test results, as water to cement ratio, or slump increase after flowed, surface glossing tends to be improved. As for the effects of the forms typer, following orders, which is shown to be better surface glossing values, are given; Acryle > fancy wood forms > steel forms > plywood forms.

• Journal of the Korea Concrete Institute
• /
• v.12 no.4
• /
• pp.15-22
• /
• 2000

The objective of this study is to investigate the degree of surface-glossing of flowing concrete, varying with W/C, types of forms and form oils. According to the experimental results, the degree of surface-glossing of flowing concrete is turned out to be higher than that of base concrete, as the slump increases. The degree of surface-glossing of concrete with 40% of W/C is higher than that with 50%. The orders of degree of surface-glossing with the types of forms are as follows : acryle > fancy plywood > metal form > plywood. When water solution type form oil is applied to the surface of forms, we can achieve higher degree of surface-glossing. It shows that the degree of surface-glossing decreases with elapsed time.

• 전자공학회논문지 IE
• /
• v.44 no.1
• /
• pp.10-14
• /
• 2007

Analytical expression for breakdown voltages of InP diodes is induced by employing the effective ionization coefficient extracted from ionization coefficients for electron and hole in InP. The analytical results for breakdown voltage are compared with numerical and experimental results for the doping concentration, $N_D=6\times10^{14}cm^{-3}\sim3\times10^{17}cm^{-3}$. The analytical results show good agreement with the numerical data. Good fits with the experimental results are found for the breakdown voltages within 10% in error at each doping concentration.