• Transactions of the Korean Society of Mechanical Engineers
• /
• v.6 no.2
• /
• pp.140-146
• /
• 1982

The purpose of this study is to investigate the free edge delamination of the laminated composites under uniaxial strain. The laminate is modeled as a set of anisotropic layers with isotropic adhesive layers. Interlaminar stresses are calculated for laminate with various laminate parameters by using two dimensional finite difference method. The redistribution of interlaminar stresses after delamination and the relation between delamination any ply failure are obtained for [.+-.45.deg.]$_{s}$, [0.deg./.+-./.+-.45.deg./90.deg.]$_{s}$ and [0.deg./45.deg./90.deg/45.deg.]$_{s}$ laminates. It was found that delamination can not propagate the entire width of the laminate under the static loading condition.ition.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.1
• /
• pp.95-102
• /
• 2016

Wrinkle, spring-back, and fracture are major defects frequently found in the sheet metal forming process, and the reduction of such defects is difficult as they are affected by uncontrollable factors, such as variations in properties of the incoming material and process parameters. Without any countermeasures against these issues, attempts to reduce defects through optimal design methods often lead to failure. In this research, a new multi-attribute robust design methodology, based on the Mahalanobis Taguchi System (MTS), is presented for reducing the possibilities of wrinkle, spring-back, and fracture. MTS performs experimentation, based on the orthogonal array under various noise conditions, uses the SN ratio of the Mahalanobis distance as a performance metric. The proposed method is illustrated through a robust design of the sheet metal forming process of a cross member of automotive body.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.6
• /
• pp.62-72
• /
• 2007

Fracture analysis of human bone is necessary to predict the failure of musculoskeletal structures and to heal them by several possible mechanisms under different loading conditions. But human bone is a complex material, with a multiphase, heterogeneous and anisotropic microstructure. Due to the difficulty of obtaining experimental and clinical results, the importance of numerical analysis and computational simulations in biomechanics are increasing gradually. In this study, stress analysis for human femur model is performed by using the 2-dimensional finite element method(FEM) and its stress distribution is determined. From these results, the fracture mechanic parameters are calculated and the fracture criteria on human femur are investigated and discussed.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2005.09a
• /
• pp.147-150
• /
• 2005

Proper PCR primer design determines the success or failure of Polymerase Chain Reaction (PCR) reactions. In this project, we develop GENE-PRIMER, a genomes specific PCR primer design program that is amenable to a genome-wide scale. To achieve this, we incorporated various parameters with biological significance into our program, namely, primer length, melting temperature of primers Tm, guanine/cytosine (GC) content of primer, homopolymeric runs in primer and self-hybridization tendency of primer. In addition, BLAST algorithm is utilized for the purpose of primer specificity check. In summary, selected primers adhered to both physico-chemical criteria and also display specificity to intended binding site in the genome.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.04a
• /
• pp.169-176
• /
• 1996

In order to suppress the structural vibration more effectively, Multiple Tuned Mass Damper(MTMD) which is composed of a number of Tuned Mass Damper(TMD) can be used. Especially, the passive MTMD has several advantages over active TMD like easy installment and maintenance, cost and performance for power failure situation(severe damage of power lines from earthquake), etc.. For this purpose the mass and damping ratio of MTMD and the distributed frequency range which shows the range of MTMD's distribution are used as main design parameters. When the passive MTMD is constituted with multiple cantilevers, the facility in its real production and its need for only a smaller space can be named as its several advantages. In this study, the satisfactory results were obtained from the composition of MTMD utilizing dynamic characters of cantilevers, and the verification was done by the comparison of the analysis from MTMD with the computer simulation.

• Journal of Korean Society for Quality Management
• /
• v.42 no.2
• /
• pp.199-208
• /
• 2014

Purpose: This paper explains how to obtain the Bayes estimates of the whole launch vehicle and of a vehicle stage, respectively, for a newly developed expendable launch vehicle. Methods: We determine the parameters of the beta prior distribution using the upper bound of the 60% Clopper-Pearson confidence interval of failure probability which is calculated from previous launch data considering the experience of the developer. Results: Probability that a launch vehicle developed from an inexperienced developer succeeds in the first launch is obtained by about one third, which is much smaller than that estimated from the previous research. Conclusion: The proposed approach provides a more conservative estimate than the previous noninformative prior, which is more reasonable especially for the initial reliability of a new vehicle which is developed by an inexperienced developer.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1024-1029
• /
• 2010

The conventional factor of safety as used in geotechnical engineering does not reflect the degree of uncertainty of the relevant parameters. Then in the geotechnical engineering, there have been efforts to reflect the uncertainties of the geotechnical properties through probabilistic analysis. In this study, a practical method for calculation the second moment reliability index using the optimization tool of a spreadsheet software is introduced. And this methodology was proposed by Low, B. K.(1996). The method is based on the perspective of an ellipsoid that just touches the failure surface in the original space of the variables. The method is applied to vertical drains(PVD) and compared with th result of Monte Carlo Simulation method.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.1
• /
• pp.42-51
• /
• 2011

Poisson model and Gamma-Poisson model are popularly used to analyze statistical behavior from defective data. The methods are based on binary criteria, that is, good or failure. However, manufacturing industries prefer polytomous criteria for classifying manufactured products due to flexibility of marketing. In this paper, I introduce two multivariate Gamma-Poisson(MGP) models and estimation methods of the parameters in the models, which are able to handle polytomous data. The models and estimators are verified on defective pixels of LCD manufacturing. Experimental results show that both the independent MGP model and the multinomial MGP model have excellent performance in terms of mean absolute deviation and the choice of method depends on the purpose of use.

• Journal of Korean Society for Quality Management
• /
• v.37 no.3
• /
• pp.33-38
• /
• 2009

When we estimate the parameters of software reliability models, we usually use maximum liklihood estimator(MLE). But this method is required a large data set. In particular, when we want to estimate it with small observed data such as early stages of testing, we give rise to the non-existence of MLE. Therefore, it is interesting to look into the influence of parameter estimators obtained using MLE. In this paper, we use two non-homogenous poisson process software reliability growth model: delayed S-shaped model and log power model. In this paper, we calculate the sensitivity of estimators about failure intensity function for two SRGMs respectively.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.701-706
• /
• 2001

This study is aimed to investigate on the structural properties(like as strength, failure mode, ductility) of beams with multiple openings reinforced with steel tube of circular. The main parameters are follows ;1)location of openings, 2)the number of opening, 3) existence of opening or not. When the locations of opening are respectively maximal moment zone, maximal shear zone, co-existence zone of moment and shear, the specimen with opening at maximal moment zone is not less than that without opening in terms of strength and ductility. The specimens with opening at shear zone and both zones are expected to carry the structural performance corresponding to beam without opening by varying the number and reinforcing method of opening.