• 한국해안·해양공학회논문집
• /
• 제20권5호
• /
• pp.498-509
• /
• 2008

본 논문에서는 안벽구조물에 대한 지지력, 전도 및 활동에 대한 파괴모드별 수준 I, II & III의 신뢰성 해석을 수행하였다. 파괴모드에 따른 적절한 설계기법을 적용하여 민감도 분석을 실시하고 케이슨식 안벽 설계시 확률변수가 신뢰지수에 미치는 영향을 분석하였다. 신뢰지수 산정결과, 최대위험시의 사례연구 I의 경우, Level II와 III 방법 모두 1.416, 사례 II의 경우, 각각 2.201과 1.880로써 Level II (FORM) 및 Level III의 시뮬레이션 방법이 잘 일치함을 확인할 수 있었다. 대체로 케이슨식 안벽은 주요 파괴모드중 지지력과 활동에 대한 파괴확률이 비교적 크고 전도에 대한 파괴확률이 가장 낮은 것으로 나타났다. 민감도 분석 결과, 신뢰지수에 가장 큰 영향을 미치는 확률변수는 활동, 전도 및 지지력 파괴모드에서 각각 마찰계수, 잔류수압 및 저항모멘트로 나타났다. 특히, 지진시 변동계수가 큰 관성력 및 동수압은 민감도 변화가 크지 않아 변동계수와 민감도에 관련된 기존의 연구와 유사한 결과를 얻었다.

• 한국지반공학회논문집
• /
• 제29권11호
• /
• pp.73-84
• /
• 2013

사면 내 토사가 붕괴되거나 토석류가 발생하는 경우 파괴면에 작용하는 전단강도는 0에 가깝게 되면서 토사가 비점성 액체와 같이 유동한다. 점성토는 함수비 증가에 따라 그 연경도가 달라지며 액체상태로 바뀌는 액성한계에서 도 약간의 전단강도를 가진다. 본 연구에서는 점성토의 전단강도가 0이 되어 흐름을 유발하는 함수비를 찾고자 하였 다. 카올리나이트, 벤토나이트, 그리고 카올리나이트(50%)+벤토나이트(50%)와 같은 세 종류의 점토에 혼합수로 증류 수, 해수, 또는 미생물용액을 혼합하여 액성한계 상태로 만든 다음 함수비를 단계적으로 증가시키면서 토베인 시험기 를 이용하여 비배수전단강도를 측정하였다. 액성한계와 소성한계에서 비배수전단강도의 범위는 각각 3.6-9.2kPa와 24-45kPa 정도이었다. 한편 측정 결과로부터 비배수전단강도가 급격하게 변화하는 값에 해당하는 함수비를 흐름함수 비(Flow Water content)로 정의하였으며, 비배수전단강도가 0이 될 때의 함수비를 흐름한계(Flow Limit)로 정의하였다. 그리고 흐름한계와 액성한계의 상관관계를 살펴보기 위하여 흐름한계와 액성한계의 차이를 점성지수(Cohesive Index) 로 정의하였다. 또한 흐름한계와 소성한계의 차이를 새로운 소성지수(New Plasticity Index)로 정의하였으며, 흐름한계를 이용하여 새로운 액성지수(New Liquidity Index)도 정의하였다. 흐름한계(Flow Limit)는 액성한계보다 1.5-2배 정도 높은 값을 보였으며, 새로운 소성지수는 기존 소성지수보다 2-5.5배 정도 높았다.

• 성인간호학회지
• /
• 제28권3호
• /
• pp.266-278
• /
• 2016

Purpose: The purpose of this study was to identify the effects of reinforced walking exercise on dyspnea-fatigue symptoms, daily activities, walking ability and health related quality of life (HRQoL) in heart failure patients. Methods: This study used a randomized controlled trial design. The participants (experimental group=16, control group=25) were recruited from a university hospital in Kyeong-nam area. Data were collected from March to September, 2015. The reinforced walking exercise included goal setting and feedback (telephone and text message) provided for 12 weeks. Dyspnea-Fatigue Index, Korean Activity Scale/Index (KASI), six-minute walking distance (6MWD) and HRQoL were measured. Data were analyzed using descriptive statistics, t-test, Fisher's exact test, $x^2$ test, and Kolmogrove-Smirnov test. Results: Prior to the intervention there were no differences in the research variables between two groups. The exercise compliance in the experimental group was 100% (walking for 50 minutes per day, 5 times per week). The experimental group had improved dyspnea-fatigue symptoms (t=8.63, p<.001), daily activities (t=-4.92, p<.001), longer 6MWD (t=-5.66, p<.001), and increased HRQoL (t=-9.05, p<.001) compared to the control group. Conclusion: The reinforced walking exercise could be a cost-effective intervention in heart failure patient, which could enhance patients' outcomes, such as improving dyspnea-fatigue symptoms, daily activities, walking ability, and quality of life.

• 대한기계학회논문집A
• /
• 제32권9호
• /
• pp.740-753
• /
• 2008

The conventional Split Hopkinson Pressure Bar (C-SHPB) technique with aluminum pressure bars to achieve a closer impedance match between the pressure bars and the specimen materials such as hot temperature degraded POM (Poly Oxy Methylene) and PP (Poly Propylene) to obtain more distinguishable experimental signals is used to obtain a dynamic behavior of material deformation under a high strain rate loading condition. An experimental modification with Pulse shaper is introduced to reduce the nonequilibrium on the dynamic material response during a short test period to increase the rise time of the incident pulse for two polymeric materials. For the dynamic stress strain curve obtained from SHPB experiment under high strain rate, the Johnson-Cook model is applied as a constitutive equation, and we verify the applicability of this constitutive equation to the probabilistic reliability estimation method. The methodology to estimate the reliability using the probabilistic method such as the FORM and the SORM has been proposed, after compose the limit state function using Johnson-Cook model. It is found that the failure probability estimated by using the SORM is more reliable than those of the FORM, and the failure probability increases with the increase of applied stress. Moreover, it is noted that the parameters of Johnson-Cook model such as A and n, and applied stress affect the failure probability more than the other random variables according to the sensitivity analysis.

• Advances in concrete construction
• /
• 제9권5호
• /
• pp.511-527
• /
• 2020

The main aim of the current research is to investigate the flexural behavior of the reinforced concrete (RC) slabs strengthened with strain hardening cementitious composites (SHCC) experimentally and numerically. Seven RC slabs were prepared and tested under four-points loading test. One un-strengthened slab considered as control specimen while six RC slabs were strengthened with reinforced SHCC layers. The SHCC layers had different reinforcement ratios and different thicknesses. The results showed that the proposed strengthening techniques significantly increased the ultimate failure load and the ductility index up to 25% and 22%, respectively, compared to the control RC slab. Moreover, a three dimensional (3D) finite element model was proposed to analyze the strengthened RC slabs. It was found that the results of the proposed numerical model well agreed with the experimental responses. The validated numerical model used to study many parameters of the SHCC layer such as the reinforcement ratios and the different thicknesses. In addition, steel connectors were suggested to adjoin the concrete/SHCC interface to enhance the flexural performance of the strengthened RC slabs. It was noticed that using the SHCC layer with thickness over 40 mm changed the failure mode from the concrete cover separation to the SHCC layer debonding. Also, the steel connectors prevented the debonding failure pattern and enhanced both the ultimate failure load and the ductility index. Furthermore, a theoretical equation was proposed to predict the ultimate load of the tested RC slabs. The theoretical and experimental ultimate loads are seen to be in fairly good agreement.

• 한국전산구조공학회논문집
• /
• 제18권3호
• /
• pp.219-226
• /
• 2005

본 연구에서는 휠체어의 경량화를 위해 기존의 강관으로 제작된 휠체어를 피로파괴 및 손상에 강하고 방진 특성이 우수하며 유지 및 보수가 용이한 복합재료 중공빔으로 구성된 복합재료 휠체어로 대체하기 위하여 복합재료 중공빔 이론과 유전자 알고리즘을 적용하여 최적화된 등가 강성을 가지는 복합재료 중공빔의 최적의 단면 치수를 제시하였다. 제시한 최적의 단면치수를 가지는 복합재료 중공빔으로 구성된 휠체어 전체 구조에 Tsai-Wu 파손이론을 이용해 과하중이 가해지는 경우에 대하여 구조해석을 수행한 결과, 휠체어의 파손 유무를 나타내는 Makimum Tsai-Wu Failure Criteria Index가 파손이 발생하는 1.00보다 현저히 낮은 $0.192\times10^{-3}$을 나타내고 있음을 알 수 있었다. 또한 기존의 강관을 동일한 강성을 가지는 복합재료 증공빔으로 대체하였을 경우 중공빔 중량을 최대 45%감소하는 효과를 얻을 수 있음을 확인할 수 있었다.

• Computers and Concrete
• /
• 제34권4호
• /
• pp.409-425
• /
• 2024

This paper utilizes LS-DYNA software to numerically investigate impact response and damage evaluation of fiber-reinforced polymer (FRP) bars-reinforced ultra-high-performance concrete (UHPC) composite beams (FRP-UHPC beams). Three-dimensional finite element (FE) models are established and calibrated by using literature-based static and impact tests, demonstrating high accuracy in simulating FRP-UHPC beams under impact loading. Parametric analyses explore the effects of impact mass, impactor height, FRP bar type and diameter, and clear span length on dynamic response and damage modes. Two failure modes emerge: tensile failure with bottom longitudinal reinforcement fracture and compression failure with local concrete compression near the impact region. Impact mass or height variation under the same impact energy significantly affects the first peak impact force, but minimally influences peak midspan displacement with a difference of no more than 5% and damage patterns. Increasing static flexural load-carrying capacity enhances FRP-UHPC beam impact resistance, reducing displacement deformation by up to 30%. Despite similar static load-carrying capacities, different FRP bars result in varied impact resistance. The paper proposes a damage assessment index based on impact energy, static load-carrying capacity, and clear span length, correlating well with beam end rotation. Their linearly-fitting coefficient was 1.285, 1.512, and 1.709 for the cases with CFRP, GFRP, and BFRP bars, respectively. This index establishes a foundation for an impact-resistant design method, including a simplified formula for peak midspan displacement assessment.

• Structural Engineering and Mechanics
• /
• 제62권3호
• /
• pp.365-372
• /
• 2017

Reliability analysis is a probabilistic approach to determine a safety level of a system. Reliability is defined as a probability of a system (or a structure, in structural engineering) to functionally perform under given conditions. In the 1960s, Basler defined the reliability index as a measure to elucidate the safety level of the system, which until today is a commonly used parameter. However, the reliability index has been formulated based on the pivotal assumption which assumed that the considered limit state function is normally distributed. Nevertheless, it is not guaranteed that the limit state function of systems follow as normal distributions; therefore, there is a need to define a new reliability index for no-normal distributions. The main contribution of this paper is to define a sophisticated reliability index for limit state functions which their distributions are non-normal. To do so, the new definition of reliability index is introduced for non-normal limit state functions according to the probability functions which are calculated based on the convolution theory. Eventually, as the state of the art, this paper introduces a simplified method to calculate the reliability index for non-normal distributions. The simplified method is developed to generate non-normal limit state in terms of normal distributions using series of Gaussian functions.

• Journal of Electrical Engineering and Technology
• /
• 제9권4호
• /
• pp.1248-1257
• /
• 2014

Overhead transmission lines are crucial components in power transmission systems. Well-designed maintenance strategy for overhead lines is required for power utilities to minimize operating costs, while improving the reliability of the power system. This paper presents a maintenance priority index (MPI) of overhead lines for a reliability centered approach. Proposed maintenance strategy is composed of a state index and importance indices, taking into account a transmission condition and importance in system reliability, respectively. The state index is used to determine the condition of overhead lines. On the other hand, the proposed importance indices indicate their criticality analysis in transmission system, by using a load effect index (LEI) and failure effect index (FEI). The proposed maintenance method using the MPI has been tested on an IEEE 9-bus system, and a numerical result demonstrates that our strategy is more cost effective than traditional maintenance strategies.

• Journal of Acupuncture Research
• /
• 제19권6호
• /
• pp.49-60
• /
• 2002

Objective : The aim of this experiment is to investigate the effect of acupuncture and moxibustion at SP6(Sanyinjiao) and BL28(Pangguanshu) on uranyl acetate-induced acute renal failure in rats. Methods : To induce experimental acute renal failure, uranyl acetate was intraperitoneally injected to rats by 5mg/kg. 3 days later acupuncture and moxibustion treatment was done at SP6(Sanyinjiao) and BL28(Pangguanshu) bilaterally of the rats. And then 4 days later, we measured rats' body weight, kidney weight, serum BUN, creatinine and serum eletrolyte levels(Na, K and Cl). Results : In the moxibustion group, hypertrophy index of kidney and serum BUN level were decreased marginally significantly, and serum creatinine, K levels were decreased significantly. But in the acupuncture group, there was no significance at this experiment. Conclusions : SP6(Sanyinjiao) and BL28(Pangguanshu) moxibustion can decrease serum BUN, creatinine, and serum eletrolyte levels on uranyl acetate-induced acute renal failure in rats. And the study will be done continuously about non-effect in the acupuncture group at this experiment.