• Journal of Chest Surgery
• /
• 제26권1호
• /
• pp.59-63
• /
• 1993

A clinical evaluation was performed with a population of 49 patients of chest trauma, who were diagnosed to undergo ventilator therapy, and had gone through ventilator therapy at the Department of Thoracic and Cardiovascular Surgery, Kyungpook University Hospital. One of most common causes of chest trauma was vehicle accidents [77.5%] with the prevalent age group being their forties. The common findings were multiple rib fractures [89.8%], hemopneumothrax [81.6%], lung contusion [61.2%] and flail chest [44.9%]. Their common combined injuries were the orthopedics and neurosugical injuries [86.7%]. Complications caused by chest trauma were pneumonia, respiratory failure, atelectasis, barotrauma and empyema. Pulmonary infections were commonly associated with mechanical ventilation in the long term group and were best prevented by using bronchial hygiene therapy.The mortality rate was 5.8% of the total patients and that was 38.8% of the patients, who needed ventilator therapy. The causes of death were pneumonia, respiratory failure, acute renal failure and hypovolemic shock. Mechanical ventilation has an important place in the treatment of patients with severe chest trauma.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.963-966
• /
• 1988

This paper describes the development of a prototype expert system, which is designed to analyze loom production efficiency by employing a loom monitoring system. The problem field of the prototype expert system is the loom failure analysis which has a great effect on prouction efficiency, and the characteristic graph in which the loom failure causes are classified and organized, is used in the analysis. The knowledge for characteristic graph is organized, and an effective inference engine- is developed. The developed system is tested and modified using hypothetical loom failure causes, and the feasibility of the expert system application to extend the functions of the loom monitoring system is proved.

• 대한산업공학회지
• /
• 제21권4호
• /
• pp.507-517
• /
• 1995

The failure rate of an item depends on operational environment. When an item has a chance failure period and a wearout failure period in sequel, the severity of operational environment causes the increase in the slop of wearout failure rate or the increase in the magnitude of chance failure rate. For such a change of operational environment, this paper concerns the change of optimal preventive replacement time. Two preventive replacement policies, age replacement policy and periodic replacement policy with minimal repair, are considered. Investigated properties are: (a) in age replacement policy, optimal preventive replacement time increases as the chance failure rate increases and optimal preventive replacement time decreases as the slope of wearout failure rate increases, and (b) in periodic replacement policy with minimal repair, optimal preventive replacement time increases as the slope of wearout failure rate increases; however, the change of chance failure rate does not alter the optimal preventive replacement time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.4-6
• /
• 2005

This paper deals with the technical map of diagnosis for power cable systems. For this purpose, failure status, failure and degradation causes, and newly suggested diagnostic techniques were investigated and analyzed. From the analysis, the technical map of diagnosis for power cable systems was proposed.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.247-247
• /
• 2006

DSME Analyzed cracked dosing valve of LNG Carrier Boiler and carried out some test to find the causes of such failure.

• International Journal of Heart Failure
• /
• 제6권3호
• /
• pp.137-139
• /
• 2024

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.607-612
• /
• 2005

Check valves playa vital role in the operation and protection of nuclear power plants. Check valves failure in nuclear power plants often lead to a plant transient or trip. An overview of the failure history of check valves needs to identify key area where resources can be best applied to further improve their reliability, and provide cost effective means for failure reduction. The analysis of historical failure data gives information on the populations of various types of check valves, the systems they are installed in, failure modes, effects, methods of detection, and the mechanisms of the failures. The results presented are based on information derived from operating records, nuclear industry reports, manufacturer supplied information. A majority of check valve failures are caused by improper application. Failure modes are identified for swing and lift check valves. Failures involving improper seating and valve disc stuck comprised the largest percentage of failures.

• 한국해양공학회지
• /
• 제23권6호
• /
• pp.32-38
• /
• 2009

An FMEA for the waterjet-lifter of a DSNM is performed to prevent the occurrence of device failure. A waterjet-lifter raises and transports manganese nodules from the deep-sea floor up to a somewhat elevated place, from which a pin-scraper transports the lifted nodules to the inner space of the DSNM. A concept design for a device using the axiomatic design methodology is shown as the mapping between the functional domain and physical domain. The FMEA for a DSNM is introduced briefly and the rating criteria of severity, occurrence, and detection for the DSNM are defined. The FMEA of the functional requirements of a DSNM device is accomplished. Three kinds of failure modes, as well as their effects and causes, are predicted. Current design control methods for detecting potential failures, such as physical or computational experiments, design confirmation, and mathematical calculation, are described and the recommended actions for several significant causes are suggested.

• 대한정형외과스포츠의학회지
• /
• 제2권1호
• /
• pp.20-27
• /
• 2003

전방십자인대재건술의빈도가증가함에따라실패율도증가되고있다. 전방십자인대재건술의실패원인중수술수기의잘못이가장흔한원인으로보고되고있다. 이에그실패의원인과재재건술의수기의문제점에대하여알아보고자한다.

• 드라이브 ㆍ 컨트롤
• /
• 제16권4호
• /
• pp.93-100
• /
• 2019

Nuclear and thermal power plants must provide the turbines with an appropriate degree of high temperature and high pressure steam, to produce the optimum electricity. Additionally, in the event of system and power system failure during electrical production, the steam is immediately disabled, to protect the turbines and generators rotating at high speed. The plant thus uses a special steam control valve system for turbine control, which is opened by force of the hydraulic servo actuator and closed by a large steel spring force. In this study, the causes of failure of the turbine control valve system, a key device of the power plants, were analyzed, and the causes of failure were improved relative to reliability of the equipment.