• Progress in Medical Physics
• /
• v.11 no.1
• /
• pp.1-18
• /
• 2000

For wedged photon beams, the variation of the wedge factor with field size was reported by several authors. However, until now such variation with field size had not been explained quantitatively. Therefore, the variation of the wedge factor was investigated by measuring outputs with field sizes increasing from 4 cm $\times$ 4 cm to 25 cm $\times$ 25 cm for open and wedged 6 and 10MV X-ray beams. The relative outputs for wedged fields to 10 cm $\times$ 10 cm have been obtained. The results show the Increase of the wedge factor caused by the change in fluence of high energy Photon beam with field size, up to 8.0% for KD77-6MV X-ray beam. This increase could be explained as a linear function of the irradiated wedge volume except small field size up to about 10 cm. In the cases of the narrow rectangular beam parallel to the wedge direction, the wedge factor decreases slightly with increasing field size up to about 10-15 cm due to a relatively reduced photon fluence from the change of the wedge thickness. We could explain the causes of a wedge factor variation with field size as the fluences of primary photon passed throughout the wedge, contributing to the dose at the central beam axis and that the fluences were affected by the gradient of the wedge with the change of field size. For clinical use, the formula developed to describe the wedge factor variation with field size has been corrected.

• Journal of Fashion Business
• /
• v.21 no.4
• /
• pp.61-72
• /
• 2017

The purpose of this study was to analyze the impact of climate change cognition on clothing behavior of fashion consumers to understand the impact of climate change on the fashion system. An online survey was conducted of 385 people in their 20s-50s working in the fashion industry as well as general consumers. Data collected from surveys were analyzed by factor analysis and t-test. Results are as follow: First, climate change cognition consists of four sub-dimensions, which are 'knowledge of climate change' and 'recognition of climate change in Korea'. Second, clothing behavior related with climate change consists of six sub-dimensions, which are 'environmentally-friendly fashion purchases', 'new clothes-wearing style affected by climate change', 'ethical fashion consumption', 'pursuit of functional fashion', 'pursuit of seasonless fashion', and 'clothes-wearing in response to climate change.' Last, the group with higher cognition of climate change than the group with lesser cognition had significantly higher degree of trying new styles created because of climate change, making ethical fashion purchases, pursuing functional fashion, and wearing clothes in response to climate change.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.3
• /
• pp.269-276
• /
• 2012

The purpose of This study's aim is to examine the difference in the changes of body segment movement, variables for ball quality, and carry at golf driver swing according to the ball quality using comparative analysis. Regarding the impact variables according to the ball quality using the track man and carry, club speed was the fastest at draw shot, ball speed was the fastest at straight shot, and smash factor was the lowest at draw shot. About the vertical launch angle, the fade shot showed the highest launch angle while the max height of the ground and ball was the highest at fade shot. And carry was the longest at draw shot. For the flight time, it was the longest at draw shot. The landing angle was the largest at fade shot. About the club head position change and trajectory, at the overall event point, the fade shot drew a more outer trajectory at the point of the follow through(E6) than the straight or draw shot. Regarding the angular speed of shoulder rotation, at the overall event point, the fade shot showed the greatest angular speed change in the follow through(E6). Also, about the angular speed of pelvic rotation, at the overall event point, the draw shot showed the greatest angular speed change at the point of down swing(E4). Concerning the stance angle change, both straight and fade shots were open as the concept of open stance whereas the draw shot was close as that of close stance. Regarding the previous study, the most important factor of deciding Ball Quality is the club face angle's open and close state at Impact. In short, the Ball Quality and carry were decided by this factor.

• Journal of Climate Change Research
• /
• v.8 no.4
• /
• pp.393-399
• /
• 2017

According to the United Nations Framework Convention on Climate Change (UNFCCC), all parties have to submit the national GHG inventory report. Estimating carbon stocks and changes in Land Use, Land-Use Changes and Forestry (LULUCF) needs an activity data and emission factors. So this study was conducted to develop carbon emission factor for Robinia pseudoacacia L., Betula platyphylla var. japonica, and Liriodendron tulipifera. As a result, the basic wood density ($g/cm_3$) was 0.64 for R. pseudoacacia, 0.55 for B. platyphylla, and 0.46 for L. tulipifera. Biomass expansion factor was 1.47 for R. pseudoacacia, 1.30 for B. platyphylla, and 1.24 for L. tulipifera. Root to shoot ratio was 0.48 for R. pseudoacacia, 0.29 for B. platyphylla, and 0.23 for L. tulipifera. Uncertainty of estimated emission factors on three species ranged from 3.39% to 27.43% within recommended value (30%) by IPCC. We calculated carbon stock and change using these emission factors. Three species stored carbon in forest and net $CO_2$ removal was $1,255,398\;t\;CO_2/yr$ during 5 years. So we concluded that our result could be used as emission factors for national GHG inventory report on forest sector.

• The Journal of Fisheries Business Administration
• /
• v.50 no.2
• /
• pp.41-56
• /
• 2019

The aim of this study is to analyze the productivity change of pollock enterprise by applying a mutually quadratic hyperbolic model and a bootstrapping model. This study used 20 units of pollock firms data (from 2013 to 2017). As a result of total productivity analysis of twenty pollock enterprises, total factor productivity was estimated to have decreased by 24.9% over the last five years (2013~2017). The main cause of this productivity decline was analyzed by technical change. In terms of annual productivity change, it showed decrease 3.0% in 2013~2014, 7.8% in 2014~2015, 4.5% in 2015~2016 and 4.7% in 2016~2017 respectively. In the analysis of productivity by corporation type, total factor productivity showed a significant decrease in both general corporation and external corporation, and productivity decrease (-29.3%) was larger than general corporation (-23.0%). In the productivity analysis by type of business, total factor productivity decreased significantly in the order of wholesale and commodity brokerage (-26.3%), food manufacturing (-25.1%) and fisheries (-15.3%). This decrease in productivity was caused by the technological change which indicates a downward shift in the production curve that is significant in all sectors.

• Water Engineering Research
• /
• v.4 no.1
• /
• pp.31-43
• /
• 2003

The impacts of climate change on soil moisture in sub - Arctic watershed simulated by using the hydrologic model. A range of arbitrary changes in temperature and precipitation are applied to the runoff model to study the sensitivity of soil moisture due to potential changes in precipitation and temperature. The sensitivity analysis indicates that changes in precipitation are always amplified in soil moisture with the amplification factor for flow. The change in precipitation has effect on the soil moisture in the catchment. The percentage change in soil moisture levels can be greater than the percentage change in precipitation. Compared to precipitation, temperature increases or decreases alone have impacts on the soil moisture. These results show the potential for climate change to bring about soil moisture that may require a significant planning response. They are also indicative of the fact that hydrological impacts affecting water supply may be important in consider-ing the cost and benefits of potential climate change.

• Journal of Environmental Science International
• /
• v.22 no.9
• /
• pp.1105-1113
• /
• 2013

This paper attempted to estimate the emissions of HFC-134a from scrap truck as a result of measuring the residual quantities of HFC-134a in air conditioner of scrap truck. We measured the residual amounts in the scrap truck of 138 by applying commercial recover for refrigerants. The average residual rate(disposal-phase emission factor) is reported to be $44.3{\pm}3.3%$ within a confidence interval of 95%. Recent year model trucks exhibit the higher residual rates. Little variation, however, is observed in regard to vehicle size. The HFC-134a emission quantity from scrap truck in 2011 is estimated to be 55,908 $tCO_2$-eq that demonstrates 21.4% increase to compare with that in 2007. As the numbers of truck have increased dramatically during the last two decades, the emissions of HFC-134a from scrap truck would increase sharply in the next coming years. HFC-134a is a very high GWP greenhouse gas. therefore have to reduce the emissions from the scrap truck and need to find ways to recycle. The chemical compositions of refrigerants from scrap truck are quite similar to those of new refrigerants, suggesting that the refrigerants from scrap truck could be reused as refrigerant.

• Korean Management Science Review
• /
• v.13 no.1
• /
• pp.135-156
• /
• 1996

The purpose of this paper is to study the links between manufacturing strategy and change programs of manufacturing firms in Korea. The nature of our analysis is more descriptive than normative or confirmative. First, we investigate the linkage between manufacturing strategy, manufacturing capability, change programs and performance measurement systems. Secondly, we intend to explore an empirical typology of manufacturing strategy and change programs. The initial findings of the study are as follows: Linkage between manufacturing strategy and change programs of manufacturing firms was not apparent. Flexibility as a strategic priority is positively related to the innovative change programs. There are two distinctive strategies of manufacturing firms in Korea, namely, quality strategy and balanced strategy. We identified three types of change programs, which are incremental change, administrative innovation, and process innovation. Incremental change group has represented low factor score in the change program dimensions. The firms in administrative innovation group mainly depend on information systems and business reengineering. Korean manufacturing firms seem to pursue process improvement by trying simultaneously incremental change in the process, managerial process improvement, and a little bit of innovative change. Performance variable utilization of the firms are not significantly different along with manufacturing strategies and change programs. We found, however, learning and improvement performance dimension is significantly related to flexibility variables. Process innovation group marked high score in usage of learning and improvement indices. The findings of this study seem to have various implications on realigning the manufacturing strategy, change programs, and performance systems in Korean firms.

• Korea Trade Review
• /
• v.41 no.5
• /
• pp.353-371
• /
• 2016

The purpose of this paper is to examine the structural change of Korean manufacturing industries and the differences of total factor productivity(TFP) between exporting industries and import substituting industries in Korean manufacturing industry from 1980 to 2013. The empirical results show that over half of total 13 industries have experienced changes of direction from import to export or export to import, which implies that there was a considerable structural change in Korean manufacturing industry. The output growth rates are higher in exporting industries than in import substituting industries. All industries employ more capital than labor during the period, which means that production methodology in Korean industries changes to a more capital intensive one. Finally, the growth rate of total factor productivity is higher in exporting industries than in import substituting industries, and it is also proved in panel regression analysis.

• The Journal of Korean Society for Radiation Therapy
• /
• v.8 no.1
• /
• pp.29-35
• /
• 1996

We are often faced with the clinical situations that is inevitably extended SSD for electron beam therapy due to anatomical restriction or applicator structure. But there are some difficulties in accurately predicting output and properties. In electron beam treatment , unlike photon beam the decrease in output for extended SSD does not follow inverse-square law accurately because of a loss of side scatter equilibrium, which is particularly significant for small cone size and low energies. The purpose of our study is to analyze the output in changing with the energy, cone size, air gap beyond the standard SSD and to compare inverse-square law factor derived from calculated effective SSD, mominal SSD with measured output factor. In addition, we have analyzed the change of PDD for several cones with different SSDs which range from 100cm to 120cm with 5cm step and with different energies(6MeV, 9MeV, 12MeV, 16MeV, 20MeV). In accordance with our study, an extended SSD produces a significant change in beam output, negligible change in depth dose which range from 100cm to 120cm SSDs. In order to deliver the more accurate dose to the neoplastic tissue, first of all we recommend inverse-square law using the table of effective SSDs with cone sizes and energies respectively or simply to create a table of extended SSD air gap correction factor. The second we need to have an insight into some change of dose distribution including PPD, penumbra caused by extended SSD for electron beam therapy.