• Korean Journal of Environment and Ecology
• /
• v.38 no.3
• /
• pp.246-262
• /
• 2024

The survey conducted from 2018 to 2020 aimed to investigate the changes in fish fauna and community characteristics in the upper reaches of the Seomgang River, Korea. During the survey period, 35 sites were selected, resulting in the collection of 7,817 fish belonging to 12 families and 40 species. The dominant species was Zacco koreanus, with a relative abundance of 34.5%, followed by Z. platypus at 28.7%. Other significant species included Rhynchocypris oxycephalus (10.2%), Pungtungia herzi (5.3%), and Squalidus gracilis majimae (4.3%). Notably, four protected species - Acheilognathus signifer, Gobiobotia brevibarba, and Cottus koreanus, designated as class II endangered wildlife by the Ministry of Environment- were identified. These species predominantly inhabit the middle and lower reaches, except for Gobiobotia brevibarba, which is found in the upper reaches. Nineteen species, accounting for a 47.5% endemism rate, were endemic to Korea. The study also noted the presence of one climate-sensitive species, Cottus koreanus, and two exotic species, Carassius cuvieri and Micropterus salmoides. Community analysis indicated a trend of decreasing dominance and increasing diversity and richness from upstream to downstream, with a distinct division into uppermost reaches, upper reaches, middle and lower reaches, and lakes. The construction of the Hwaseong Dam has had a significant direct and indirect impact on the fish community. The habitat and abundance of endangered species such as R. pseudosericeus, A. signifer, and G. brevibarba decreased dramatically immediately after the dam's construction, transforming the submerged area from lotic to lentic environments. Approximately 20 years later, the habitats have stabilized, leading to an increase in the fish population and a recovery of the previously diminished endangered species. The river health (FAI) was also evaluated, with 27 sites rated as very good (A), seven as good (B), and one as fair (C). However, endangered species such as A. signifer continue to face threats from dam and river construction, while C. Koreanus has experienced a severe population decline due to river works. Additionally, the presence of the ecosystem-disrupting species M. salmoides in Hwaseong Lake raises concerns. To ensure a stable habitat for fish in the upper reaches of the Seomgang River, it is crucial to avoid indiscriminate river construction, urgently implement restoration policies for endangered species such as A. signifer, and develop management strategies to control the spread of invasive species such as bass.

• Journal of Internet Computing and Services
• /
• v.17 no.4
• /
• pp.35-42
• /
• 2016

Recently many researches have been focused on the use of the markerless augmented reality system using face, foot, and hand of user's body to alleviate many disadvantages of the marker based augmented reality system. In addition, most existing augmented reality systems have been utilized rigid objects since they just desire to insert and to basic interaction with virtual object in the augmented reality system. In this paper, unlike restricted marker based augmented reality system with rigid objects that is based in display, we designed and implemented the markerless augmented reality system using deformable objects to apply various fields for interactive situations with a user. Generally, deformable objects can be implemented with mass-spring modeling and the finite element modeling. Mass-spring model can provide a real time simulation and finite element model can achieve more accurate simulation result in physical and mathematical view. In this paper, the proposed markerless augmented reality system utilize the mass-spring model using tetraheadron structure to provide real-time simulation result. To provide plausible simulated interaction result with deformable objects, the proposed method detects and tracks users hand with Kinect SDK and calculates the external force which is applied to the object on hand based on the position change of hand. Based on these force, 4th order Runge-Kutta Integration is applied to compute the next position of the deformable object. In addition, to prevent the generation of excessive external force by hand movement that can provide the natural behavior of deformable object, we set up the threshold value and applied this value when the hand movement is over this threshold. Each experimental test has been repeated 5 times and we analyzed the experimental result based on the computational cost of simulation. We believe that the proposed markerless augmented reality system with deformable objects can overcome the weakness of traditional marker based augmented reality system with rigid object that are not suitable to apply to other various fields including healthcare and education area.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.2
• /
• pp.311-326
• /
• 2018

This paper has experimented using News sample video with QCIF ($176{\times}144$) resolution in JM v10.2 code of H.264/AVC-MPEG. The region of interest (ROI) to be encrypted occurred the drift by unnecessarily referring to each frame continuously in accordance with the characteristics of the motion prediction and compensation of the H.264 standard. In order to mitigate the drift, the latest related research method of re-inserting encrypted I-picture into a certain period leads to an increase in the amount of additional computation that becomes the factor increasing the bit-rate overhead of the entire video. Therefore, the reference search range of the block and the frame in the ROI to be encrypted is restricted in the motion prediction and compensation for each frame, and the reference search range in the non-ROI not to be encrypted is not restricted to maintain the normal encoding efficiency. In this way, after encoding the video with restricted reference search range, this article proposes a method of RC4 bit-stream encryption for the ROI such as the face to be able to identify in order to protect personal information in the video. Also, it is compared and analyzed the experimental results after implementing the unencrypted original video, the latest related research method, and the proposed method in the condition of the same environment. In contrast to the latest related research method, the bit-rate overhead of the proposed method is 2.35% higher than that of the original video and 14.93% lower than that of the latest related method, while mitigating temporal drift through the proposed method. These improved results have verified by experiments of this study.

• Korean Journal of Social Welfare
• /
• v.57 no.2
• /
• pp.5-40
• /
• 2005

Social welfare centers and residential care facilities where provide the socially disadvantaged with proper social services, face financial difficulties. This is because not only of the lack of governmental support, but also of social welfare centers and residential care facilities' lack of skills in developing abundant resources from the private sector. In this context, this study tried to find factors affecting resource mobilization of the social welfare facilities to devise policies in resource development. Mail survey was conducted with the structured questionnaire. Employees in charge of community resource development were asked to answer the questionnaire. The study population were welfare centers and residential care facilities. A total of 293 community welfare centers and 632 residential care facilities responded to the survey. The response rate was about 62%. The dependent variables of the study were the amount of resource mobilization in the year 2001 which was measured as the number of donors, the total amount of donation, and estimated amount of gift-in-kind. Three types models were constructed per each welfare institution. Independent variables were selected based on the previous research findings: community environment factor, structural factor, and resource development factor. Multiple regression was utilized to analyze the data. The resource development factor turned out to be significant variable in various models. In the models of donors, the amount of donation, and the amount of gift-in-kind (except for the welfare center model), at least one out of six variables of the resource development factors was significant welfare center. Welfare centers which establish the resource development department or hire employees to take care of resource development, utilize computer softwares to file donors, and utilize donor management programs, have more donors and/or donations than their counterparts. In addition, residential care facilities located in urban area have more donors and donations, and among residential facilities those for the disables, those with longer history and more employees, receive more donations than their counterparts. As for the gift-in-kind model, the welfare centers located in high income area and residential care facilities for the elderly, children and mentally retarded receive less gift-in-kind than their counterparts Based on the above findings, this study suggested that to mobilize resources the welfare centers as well residential care facilities need to have community resource development department or resource development staffs, adopt computer software to systematically organize donors, and utilize donor mobilizing and maintaining programs.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 1998.10a
• /
• pp.2-4
• /
• 1998

Proliferation of Nocardia amarae cells in activated sludge has often been associated with the generation of nuisance foams. Despite intense research activities in recent years to examine the causes and control of Nocardia foaming in activated sludge, the foaming continued to persist throughout the activated sludge treatment plants in United States. In addition to causing various operational problems to treatment processes, the presence of Nocardia may have secondary effects on the fate of heavy metals that are not well known. For example, for treatment plants facing more stringent metal removal requirements, potential metal removal by Nocardia cells in foaming activated sludge would be a welcome secondary effect. In contrast, with new viosolid disposal regulations in place (Code o( Federal Regulation No. 503), higher concentration of metals in biosolids from foaming activated sludge could create management problems. The goal of this research was to investigate the metal sorption property of Nocardia amarae cells grown in batch reactors and in chemostat reactors. Specific surface area and metal sorption characteristics of N. amarae cells harvested at various growth stages were compared. Three metals examined in this study were copper, cadmium and nickel. Nocardia amarae strain (SRWTP isolate) used in this study was obtained from the University of California at Berkeley. The pure culture was grown in 4L batch reactor containing mineral salt medium with sodium acetate as the sole carbon source. In order to quantify the sorption of heavy metal ions to N amarae cell surfaces, cells from the batch reactor were harvested, washed, and suspended in 30mL centrifuge tubes. Metal sorption studies were conducted at pH 7.0 and ionlc strength of 10-2M. The sorption Isotherm showed that the cells harvested from the stationary and endogenous growth phase exhibited significantly higher metal sorption capacity than the cells from the exponential phase. The sequence of preferential uptake of metals by N. amarae cells was Cu>Cd>Ni. The specific surFace area of Nocardia cells was determined by a dye adsorption method. N.amarae cells growing at ewponential phase had significantly less specific surface area than that of stationary phase, indicating that the lower metal sorption capacity of Nocardia cells growing at exponential phase may be due to the lower specific surface area. The growth conditions of Nocardia cells in continuous culture affect their cell surface properties, thereby governing the adsorption capacity of heavy metal. The comparison of dye sorption isotherms for Nocardia cells growing at various growth rates revealed that the cell surface area increased with increasing sludge age, indicating that the cell surface area is highly dependent on the steady-state growth rate. The highest specific surface area of 199m21g was obtained from N.amarae cell harvested at 0.33 day-1 of growth rate. This result suggests that growth condition not only alters the structure of Nocardia cell wall but also affects the surface area, thus yielding more binding sites of metal removal. After reaching the steady-state condition at dilution rate, metal adsorption isotherms were used to determine the equilibrium distributions of metals between aqueous and Nocardia cell surfaces. The metal sorption capacity of Nocardia biomass harvested from 0.33 day-1 of growth rate was significantly higher than that of cells harvested from 0.5- and 1-day-1 operation, indicatng that N.amarae cells with a lower growth rate have higher sorpion capacity. This result was in close agreement with the trend observed from the batch study. To evaluate the effect of Nocardia cells on the metal binding capacity of activated sludge, specific surface area and metal sorption capacity of the mixture of Nocardia pure cultures and activated sludge biomass were determined by a series of batch experiments. The higher levels of Nocardia cells in the Nocardia-activated sludge samples resulted in the higher specific surface area, explaining the higher metal sorption sites by the mixed luquor samples containing greater amounts on Nocardia cells. The effect of Nocardia cells on the metal sorption capacity of activated sludge was evaluated by spiking an activated sludge sample with various amounts of pre culture Nocardia cells. The results of the Langmuir isotherm model fitted to the metal sorption by various mixtures of Nocardia and activated sludge indicated that the mixture containing higher Nocardia levels had higher metal adsorption capacity than the mixture containing lower Nocardia levels. At Nocardia levels above 100mg/g VSS, the metal sorption capacity of activate sludge increased proportionally with the amount of Noeardia cells present in the mixed liquor, indicating that the presence of Nocardia may increase the viosorption capacity of activated sludge.

• Archives of design research
• /
• v.1 no.1
• /
• pp.1-162
• /
• 1980

The Design Society of Korea. It is our urgent task that we should map out our detailed guiedlines for the improvement of export-oriented industries and of the design of export goods in preparation for our export goal of $30 billion in the upcoming 1980s. The government, university design researchers, and most entrepreneurs have confronted diverse kinds of racking issues: how much do most export industries take advantage of the indus-trial design for the improvement of the quality of export goods\ulcorner, structural defects of most export industries, chronic and vicious cycle of overlooking the value of the industrial design in the process of manufacturing export goods and etc. In other words, the recent trend of slighting the industrial design is to speed up the sales of only unsophisticated goods on the international markets. Although Koreans have been plagued by scantiness of natural resources under these circumstances, most Korean people have showed off their strong will for today's growth. Furthermore, most exporters should do their best to sweep overseas markets by manufacturing sophisticated goods outranking those commodi-ties made by the United States, Japan, West Germany and the other developed countries. In this respect, we have to make our best efforts for the expensive application and practical use of the industrial design, one of the comprehensive sciences, in the face of the hard realities and conditions which we have confronted until now. For example, it can be attributed to the practical application of the industrial design that the neighboring Japan, West Germany, France, the United Kingdom in Europe, and the United States in North America have formulated a highly advan-ced cultural zone and braced up for their own trade protection-ism and tightened their embargoes on EEC goods. Unless any export goods take the best advantage of the industrial design, one of the behavioral sciences capable of satisfying the material mental needs of modern men and of promoting cultural growth, I am convinced that they will not infiltrate into any countries that have enjoyed their own highly cultural lives. It is absolutely important that most Korean universities, state-run, private corporations and research institutes should work out the improvement strategy for the development and practical use of the industrial design as will as the revision of the present curricula of the departments of design. However, most design researchers have come to grips with several difficult problems such as the correlation of export oriented industries and the industrial design and the development of the design of export goods. The improvement of the industrial design is our urgent assignment that we have to solve in the 1980s. Accordimgly, I cannot too much emphasize the value the recognition of the industrial design in our industrial communities because we have never witnessed the prosperity of those countries which have taken little notice of the importance of the industrial design. Hopefully, most entrepreneurs will take much consideration of the value of the industrial design and then can defeat their rival businessmen on the international markets by exporting goods of highly sophisticated design. In this respect, the main purpose of the research paper which this society presented is to underline the fact that the improvement and development of the industrial design is our common assignment to be studied from the viewpoints of national dimension as well as in conformity with our immediate goal for the export-oriented prosperity of state. In conclusion, I would like to highlight the fact that our export goods shall be continually developed in pace with the correlative improvement of the indudtrial design so as to pave the way for their bright prospect and to enhance their best impression of the first-class goods on the international markets.

• Journal of Sasang Constitutional Medicine
• /
• v.10 no.1
• /
• pp.1-11
• /
• 1998

Constitution means to combine the function into the body. It also includes the genetic factor and the environmental factor. Sasang Constitutional Medicine has the organized and unique ideas of the theory and the practice. So it is widly used in korea. But It has a problem to be popular. That's the objectification of Sasang constitution. There are so many studies to classify Sasang constitution analytic and objectively. I try to classify the studies to identify Sasang constitution objectively and check the problems. 1. The morphologic studies of Sasang Constitution are dividied into the figure and the face-speech through the morphologics and the phonetics. We need to standardize and make a simple method through computer software. 2. The study of the mind is used by the questionnaire about the telent, the character, and the greed each constitution. Recently QSCC II computer software is made and is used at many clinics in Korea. We need to recheck children and Taeyangin. 3. The symptom and the disease are subjective. So the study of them is usually used by some diagnostic equipments. But these have to be revaluated on the view of Oriental Medicine and Sasang Constitutional Medicine and try to study the objectification of Sasang constitution. And then we must try to objectify Sasang constitutional disease. 4. Disease and symptoms have to be studied much more about the mechanism and the relation. The study of medicine was done the way of the homeopathy using EAV. But that had some problems. So it should depend on the new science.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1634-1647
• /
• 2007

"To invest or not to invest?" Most business leaders are frequently faced with this question on new and ongoing projects. The challenge lies in deciding what projects to choose, expand, contract, defer, or abandon. The project valuation tools used in this process are vital to making the right decisions. Traditional tools such as discounted cash flow (DCF)/net present value (NPV) assume a "fixed" path ahead, but real world projects face uncertainties, forcing us to change the path often. Comparing to other traditional valuation methods, the real options approach captures the flexibility inherent to investment decisions. The use of real options has gained wide acceptance among practitioners in a number of several industries during the last few decades. Even though the options are present in all types of business decisions, it is still not considered as a proper method of valuation in some industries. Mining has been comparably slow to adopt new valuation techniques over the years. The reason fur this is not entirely clear. One possible reason is the level and types of risks in mining. Not only are these risks high, but they are also more numerous and involve natural risks compared with other industries. That is why the purpose of this study is to deal with a more practical approach to project valuation, known as real options analysis in mining industry. This paper provides a case study approach to the copper mining industry using a real options analysis. It shows how companies can minimize investment risks, exercise flexibility in decision making and maximize returns.

• Korean Journal of Remote Sensing
• /
• v.38 no.5_1
• /
• pp.447-460
• /
• 2022

It is well known that satellite synthetic aperture radar interferometry (InSAR) has been widely used for the observation of surface displacement owing to earthquakes, volcanoes, and subsidence very precisely. In wetlands where vegetation exists on the surface of the water, it is possible to create a water level change map with high spatial resolution over a wide area using the InSAR technique. Currently, a number of imaging radar satellites are in operation, and most of them support a ScanSAR mode observation to gather information over a large area at once. The Cienaga Grande de Santa Marta (CGSM) wetland, located in northern Colombia, is a vast wetland developed along the Caribbean coast. The CGSM wetlands face serious environmental threats from human activities such as reclamation for agricultural uses and residential purposes as well as natural causes such as sea level rise owing to climate change. Various restoration and protection plans have been conducted to conserve these invaluable environments in recognition of the ecological importance of the CGSM wetlands. Monitoring of water level changes in wetland is very important resources to understand the hydrologic characteristics and the in-situ water level gauge stations are usually utilized to measure the water level. Although it can provide very good temporal resolution of water level information, it is limited to fully understand flow pattern owing to its very coarse spatial resolution. In this study, we evaluate the L-band ALOS-2 PALSAR-2 ScanSAR mode to observe the water level change over the wide wetland area using the radar interferometric technique. In order to assess the quality of the interferometric product in the aspect of spatial resolution and coherence, we also utilized ALOS-2 PALSAR-2 stripmap high-resolution mode observations.

• Journal of Korean Home Economics Education Association
• /
• v.32 no.4
• /
• pp.19-30
• /
• 2020

Maker education started on the basis of the maker movement in which makers gathered in makerspace share their activities and experiences, and the educational value pursued in maker education is based on the constructivist paradigm. The purpose of this study is to present maker education components to be used in school education, focus on the characteristics and educational values of maker education, and explore ways to use them. To this end, this study explored the theoretical grounds to re-conceptualize maker education, drew statements based on in-depth interview data of teachers conducting maker education classes, and reviewed its validity through experts. Based on these statements, by deriving the components for the use of maker education, the direction of maker education in school education was set, and an example framework that could be used in subject class and creative experiential learning was proposed. Research shows that in maker education, makers cooperate to carry out activities, share ideas with others and try to improve them, and include self-direction such as learning, tinkering, design thinking, sharing and reflection. can see. In addition, maker education emphasizes experiential learning that can solve real problems that students face, rather than confining specific activities to student choices as needed. It emphasizes the learner's course of action rather than the outcome of the activity, tolerates the learner's failure, and emphasizes the role of the teacher as a facilitator to promote re-challenge. In the future, it can be used in various ways in each subject (curriculum expert, teaching/learning expert, elementary and middle school teachers, parents, local educators, etc.) and school activities, and it will contribute to setting future research directions as a basic research for school maker education.