• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.7
• /
• pp.54-60
• /
• 2007

We constructed a fiber-optic temperature sensor system using a sensor array with 15 fiber Bragg gratings for distributed temperature monitoring in electrical power systems. A polynomial fitting algorithm was used to compensate the nonlinear action of the MEMS tuneable wavelength filter used for Bragg wavelength demodulation Fixed passband wavelengths from a Fabry-Perot ITU filter were used as reference wavelengths for the fitting algorithm which obtained constant accuracy regardless of the wavelength scanning range and frequency. About 0.18[%] of linearity error compared to reference thermocouple thermometer has been obtained in the preliminary experimental results.

• Korean Journal of Optics and Photonics
• /
• v.15 no.6
• /
• pp.495-502
• /
• 2004

We proposed an analysis model for a Fabry-Perot cavity constructed with a plane-mirrored optical fiber and a concave-mirrored one. We presented the analysis results calculated by inserting practical values into the equations derived. The coupling loss of the cavity and the mirror loss are the most important parameters in reducing the insertion loss of the filter. In order to build a filter of finesse 600, FSR 57 nm, and insertion loss < 3 dB, the plane-concave cavity using mirrors of loss < 0.09% should be aligned for the coupling loss to be less than 0.1 %.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.263-268
• /
• 2004

In the present study, a Nd;YAG Laser (pulse type) was used to emit ultrasonic signals to a test material. In addition, a total ultrasonic investigation system was designed by adopting a Fabry-Perot interferometer, which receives ultrasonic signals without any contact. For non-destructive test SM45C, which contains some flaws was used as a test material. Because it is easy to align light beam in receiver, and the length of the light beam does not change much even if convex mirror leans towards one side, confocal Fabry-Perot interferometer, which has stable frequency, and PI control are used to correct interfered and unstable signals from temperature, fluctuation and time shift of laser frequency. Stable signals are always obtained by the feedback of PI circuit signals in the confocal Fabry-Perot interferometer. The type, size and position of flaws inside the test material were examined by achieving the stabilization of an interferometer. This study presented a useful method, which could quantitatively investigate the fault of objects by using a Fabry-Perot interferometer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4C
• /
• pp.430-436
• /
• 2009

In this paper, we propose and describe our implementation of an automatic control system for the center wavelength of a fiber Bragg grating. The proposed system consists of a Fabry-Perot filter and cantilever structure controlled by a step motor interfacing computer. We consider the change of the center wavelength and the reflective spectrum shape for a given FBG according to the translation distance of the push stick and the cantilever thickness variation. The proposed system can control the center wavelength of a FBG with a resolution of 0.01 nm by applying compression or extension to the FBG. The proposed system has characteristics that keep the desired wavelength of the FBG with a variation of environmental conditions.

• Korean Journal of Optics and Photonics
• /
• v.9 no.1
• /
• pp.5-8
• /
• 1998

In calculating the light propagation in inhomogeneous uniaxial materials by using a conventional $4{\times}4$ matrix method, Fabry-Perot effect is caused by inherent multiple internal reflections at interfaces for monochromatic light source. In this paper we propose an apodization method by which we can eliminate in negligible time the interference fringe in the $4{\times}4$ matrix optics. For a cell with k abrupt interfaces, the new apodization method can be implemented simply by, at maximum, (k+1) addtional $4{\times}4$ matrix multiplications in calculating the complete transfer matrix of the cell.

• Journal of Sensor Science and Technology
• /
• v.30 no.1
• /
• pp.56-60
• /
• 2021

In this study, the relationship between the transmitted light intensity and full-width-at-half-maximum (FWHM) of a Fabry-Perot filter was investigated. The measured refractive indices and absorption coefficients of the fabricated thin films were applied to the Fabry-Perot filter via simulations using optical software. Although considerable research has been conducted on Fabry-Perot filters, this study focused on the usefulness of 4.26-㎛ infrared filtering in carbon dioxide detection. Optical analysis was performed considering the effects of the thickness, refractive indices, and number of thin films in a distributed Bragg reflector. Ultimately, a clear trade-off relationship was observed wherein the transmitted light intensity decreased as the number of multilayers increased; however, the FWHM was observed to be narrower.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.8
• /
• pp.133-139
• /
• 1995

In this paper, the frequency separation locking and interval stabilization of 4-channel DFB-LDs have been demonstrated using a fiber Fabry-Perot filter with an free spectral range of 100GHz. Frequency fluctuation and locking range of each channel were appeared to be within 15MHz and over 12GHz, respectively. Back-reflection curve from the fiber Fabry-Perot filter was used for the extraction of an error signal in order to increase the number of accomodable channels and extinction ratio.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.298-299
• /
• 2003

초음파는 일반적으로 물질의 내부결함을 측정하거나 결정입경과 같은 물질의 특성을 측정하는데 사용된다. 현재 초음파를 검지하는 방법으로는 탐촉자를 물질에 접촉시켜서 초음파를 측정하는 접촉식 방법이 널리 사용되고 있다. 따라서, 이러한 접촉식 초음파 검출방법은 원격탐사를 하는데에 어려움이 있다. 이런 문제점을 보완하기 위하여 본 연구에서는 패브리-페로 간섭계(Fabry-Perot interferometer)를 이용하여 비접촉식으로 초음파를 검출하는 방법에 대하여 실험하였다. (중략)

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.7
• /
• pp.1393-1397
• /
• 2009

A high-speed wavelength swept laser, which is based on oscillation characteristics of a fiber Fabry-Perot tunable filter, is described. The laser is constructed by using a semiconductor optical amplifier, a fiber Fabry-Perot tunable filter, and 3.348 km fiber ring cavity. The wavelength sweeps are repeatatively generated with the repetition period of 61 kHz which is the first parallel oscillation frequency of the Fabry-Perot tunable filter for the low power consumption. Mode-locking is implemented by 3.348 km fiber ring cavity for matching the fundamental of cavity roundtrip time to the sweep period. The wavelength tuning range of the laser is 87 nm(FWHM) and the average output power is 1.284 mW.

• Korean Journal of Optics and Photonics
• /
• v.5 no.1
• /
• pp.106-112
• /
• 1994

The injection-locking of the broad-area diode laser was analysed by using the Fabry-Perot model. The far-field pattern of the output beam was able to be treated by superposing the individual beams emitted from the front facet due to the multiple reflections between the front and rear facets. and the exact near and far field patterns were obtained. The angle-steering effect according to change of the incident frequency was changed was calculated and found to be 0.022 degree/GHz with a bandwidth of 120 GHz.20 GHz.