• Journal of Fashion Business
• /
• v.11 no.1
• /
• pp.125-135
• /
• 2007

Each cotton fiber is a unicellular hair collected from the seed of cotton plant. The fiber contains many convolutions along its length. Mercer was the first to suggest caustic soda treatment of cotton in commercial application. Mercerization has been commercially used since Lowe's suggestion to endow cotton with increased strength and affinity for dyes with additional properties such as fabric touch or luster. In this study, cotton fabric specimens were mercerized to investigate the changes in physical and mechanical properties pertaining to the hand or touch of fabrics. Physical properties were measured using the KES(Kawabata Evaluation System).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.5
• /
• pp.929-938
• /
• 2017

This research investigated the effects of cool touch fabrics on thermo-regulating physical properties and subjective evaluation using a 3D fitted women's T-shirts in wear test. Qmax, clothing microclimate, microclimate wettedness, thermogram and subjective vote were observed during rest-right after an exercise-rest protocol. As a result, there was no single determining physical variable to explain the reasons of cool sensations of T-shirts made of cool touch fabric across the entire protocol. Qmax could partly predict a wear sensation at the initial stage when only insensible perspiration was presented. Simultaneous observation of temperature/humidity gradient understand from the inside to the outside of the clothing layer or microclimate wettedness calculated using vapor pressure were helpful to figure out the performance of cool touch fabric, especially at the later stage of the protocol when sweating was excessive. It was especially difficult to connect thermo-regulating physical variables to the subjective evaluation during transient conditions such as 'right after exercise' stage. It is necessary to measure the amount of heat and moisture transferred from the skin to the outside of clothing along with the physical properties measured in this study to understand the detailed mechanisms of why a cool sensation is evoked from tight fitting T-shirts made of newly developed cool touch fabrics.

• Textile Coloration and Finishing
• /
• v.27 no.4
• /
• pp.309-317
• /
• 2015

This study is the high contraction processing conditions set by the method of the CPB process. And the ultimate goal of this study is the high contraction of the CPB processing test method that can solve the problems of the high-contraction fabric processing method of the current jet dyeing machine. Non-coating process(CPB process) developed by the expression of a soft touch, light weight, functional and to develop excellent breathable nylon fabric. The nylon fabrics established the optimum processing conditions through the high contraction of the various test conditions, the CPB system.(The benzyl alcohol was used as the main constrictor.) At this time, the warp and weft contraction of nylon fabric was about 20%. And it established the constrictor concentration, the treatment temperature, time of a variety of tests. Also non-coating process(CPB process) can develop soft touch, lightweight, excellent air permeability. As a result, we developed a high contraction nylon fabric having a uniform surface. Manufactured fabric is used for Wind-proof and Down-proof.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.103-104
• /
• 2008

Radio-frequency(RF) weldable polyurethane-coated fabric was prepared by knife coating of presetted and cire-finished nylon fabric using optimized coating formulation including RF-sensitive commercial polyurethane resins. The physical properties, adhesion strength, peeling strength, abrasion strength, flexibility, and hydrostatic water resistance of the prepared coated fabric were good enough to show no significant difference with regular coating. Additionally the prepared coated fabric had silky and soft touch without tackiness.

• Fashion & Textile Research Journal
• /
• v.22 no.1
• /
• pp.66-75
• /
• 2020

This study helps develop cool-touch functional dance sportswear. We suggest a draft design for dance sportswear that chooses appropriate cool-touch functional materials based on an investigation of the changes of body surface temperature before and after exercise, the physical properties of cool-touch materials on the market, and the preference for cooling tools. The results are as follows. First, cool-touch functional sportswear products on the market utilize materials such as PCM, Delta fabric, high gauge fabric, and ice chips as well as incorporate functions such as UV block and eyelets for enhanced breathability. Polyester and polyurethane fibers are mainly used for cool-touch functional sportswear. Second, the neck area showed the highest surface temperatures (32.7℃ and 32.1℃) before and after exercise. Body surface temperatures measured after exercise were also lower than temperatures measured before exercise when wearing dance sportswear. Third, as for the physical properties of cool-touch materials, material 1 showed amaximum drying speed (130 min), material 3 the best moisture absorption speed (122 × 132 min), and material 4 the best thermal conductivity (0.013 7 w/m·K). Fourth, a draft design for a cool-touch functional dance sportswear was suggested, including a neckband made of removable soft PVC material on the neck area and applying material 4 in F1, B4, S2 and lower arm areas and material 1 in the armpit area. Deodorant tape was also attached to the armpit area for added comfort and antibacterial deodorant effect.

• Fashion & Textile Research Journal
• /
• v.23 no.5
• /
• pp.645-654
• /
• 2021

This study aimed to visually compare the implementation of digital virtual fabrics for stretch fabrics mainly used in clothing that closely touch the body, using CLO. A digital fabric was used in CLO after measuring the weight, thickness, bending, and tensile force of five adhering clothing fabrics using a CLO fabric kit. The visual similarity of draftability was compared by measuring the area of the bending angle and the shape of the wrinkles of the real and digital fabric. A comparison of the bending angles showed that Fabric A was -0.75° and Fabric D was -2.5°, showing slightly lower drape properties than the real fabric. Meanwhile, Fabric B was 2.75°, Fabric C was 2.13°, and Fabric E was 1.375°, showing slightly higher drape properties in the vertical direction than the real fabric. Comparing the widths of the drape shapes, Fabric A was 0.77%, Fabric B was 1.27%, Fabric C was 0.06%, and Fabric E was 1.48%, which showed a slight difference. Fabric D showed a difference of 3.17% and was implemented where the digital fabric spread a little wider. As a result, the stretch fabric was visually expressed similarly to the real fabric as a whole in CLO. For 3D virtual clothing technology to be used widely in the close clothing industry in the future, more research on real clothing is needed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.3
• /
• pp.360-370
• /
• 2012

This study investigates the interaction effects of mechanical property-based clusters and colorimetric tones on the subjective touch and color sensation of fabrics when sight and touch were simultaneously provided to humans. Each of six different silk fabrics was colored by digital textile printing to have three tones (pale, vivid, and grayish) and its mechanical properties were measured by a Kawabata Evaluation System (KES). Touch and color sensation were identified to be primarily influenced by mechanical property-based clusters and tones, respectively. In touch, 'smooth', 'warm', 'heavy', and 'soft' were found to be affected by interactive effects of mechanical property-based clusters and colorimetric tone so that the pale tone tended to make differences smaller among the clusters for the touch sensation, while the grayish tone seemed to contribute to larger differences of 'heavy'. However, an interaction effect was not found in the color sensation with touch even though the color sensation was also influenced by mechanical property-based clusters.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.8
• /
• pp.1240-1251
• /
• 2007

The purpose of this study was to examine the relationship between weight of fabrics and texture and sensibility and preference of consumers for F/W women's jacket fabrics. Structural Equation Model(SEM) using AMOS program was conducted to analyze the relationships. Then, this study aimed to provide useful information in planning designing fabrics through predicting the subjective characteristics analyzed. The main survey was developed the 7-point semantic differential scale of subjective texture, sensibility and preference. Fifty trained female panelists of 20-30 years old were participated and questionnaire method was used with 20 kind of fabric. The evaluation methods such as by the sense of sight & touch were used when fabrics were estimated subjectively. When evaluated by the sense of sight & touch, fabric's weight did not have effect directly on preference, but had effect indirectly on preference through the texture and the sensibility..

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.6
• /
• pp.800-808
• /
• 1999

The demand for PU coated synthetic leather is increasing as a high fashion material. But it has some faults of water vapor permeability surface tacky property and static electricity. Therefore the purpose of this study was the produce of PU coated fabric added collagen with hydrophilic property and soft touch. In the PU coated fabric water vapor permeability water vaper absorption and frictional electronic voltage were investigated surface bending and compression properties were also examined by the use of KES-FB System. The followings were the results of this study. 1. There was no Cr in the collagen so that Cr was not treated in the collagen. 2. The surface and cross sectional layer of PU coated fabric with collagen were highly developed by micro porous structure. 3. The water vapor permeability of PU coated fabric was increased as collagen concentration increased. 4. The water vapor absorption of PU coated fabric was increased as collagen concentration increased. 5. The frictional electronic voltage of PU coated fabric was decreased in accordance with the increase of collagen concentration. Especially it effectively decreased by the use of only 5% collagen concentration. 6,. The bending and compression properties of PU coated fabric were increased in accordance with the increase of collagen concentration so that it became stiff. 7. The Value of MIU, SMD was decreased in accordance with the increase of collagen concentration so that the PU coated fabric became smooth.

• Fashion & Textile Research Journal
• /
• v.18 no.2
• /
• pp.244-251
• /
• 2016

Viscose rayon filament fabrics have been called 'artificial silk' and beloved as summer clothing materials for a long time in Korea. This is because the viscose rayon filament fabrics reveals glossy surface and cool touch feeling compared to other conventional fabrics composed of staple fibers. Therefore, we tried to prepare the higher value added viscose rayon filament fabrics for summer textile products. In this study, we applied gallnut extract to the viscose rayon filament fabric to develop summer fabrics with natural color and multi-functions such as antibacterial and antioxidant properties. This process also pursue eco-friendly and multi-functional fabric finishing from the natural material "gallnut". In addition, various pre-treatment with cationizer, chitosan, or chito-oligomer was applied to the finishing process to improve the finishing efficacy and durability. Consequently, it was found that the active component of gallnut extract was successfully incorporated to the viscose rayon filament fabric through a pad-dry-cure process. And, the treated viscose rayon filament fabrics showed excellent antibacterial and antioxidant properties. Therefore, it was expected that the rayon filament fabrics treated by gallnut extract could be used as effective summer fabrics preventing the growth of bacteria and skin ageing as well as providing cool touch feeling. However, the pre-treatments were not that meaningful on the functionalities but effective on coloring.