• Journal of Animal Science and Technology
• /
• v.49 no.1
• /
• pp.9-14
• /
• 2007

Data of 369 commercial pigs produced from YorkshrexLancrace (YL F1) sows crossed with either Duroc (D), Berkshire (B) or BerkshirexDuroc(BD F1) as a terminal sire were used for the comparison of carcass garde and real retail cut yield. The crosses were performed between May, 2004 and May, 2006 at three interrlated farms belonging to the Gyeongam pork brand. The average carcass weight, carcass backfat thickness, carcass rate, AB grade ratio, lean meat yield were 84.78±0.33kg, 20.72±0.237mm, 76.25±0.208%, 85.7% and 44.30±0.158%, respectively. The average weights of real retail cut were 10.32±0.062kg belly, 4.17±0.025kg boston butt, 3.88±0.022kg rib, 8.40±0.040kg picnic, 15.15±0.081kg ham, 6.44±0.043kg loin and 0.94±0.006kg tender loin. In comparisons of carcass traits among cross types, carcass weights and backfat thicknesses of YL(♀)×B(♂), YL(♀)×BD(♂) and YL(♀)×D(♂) were 85.73±0.516kg, 82.69±0.788kg and 84.79±0.603kg, respectively and 22.09±0.356mm, 20.33±0.543mm and 19.58±0.415mm, respectively. The YL(♀)×B(♂) cross showed the highest carcass weight and backfat thickness. The ratio of AB grade were 0.83±0.030% in YL(♀)×B(♂), 0.97±0.046% in YL(♀)×BD(♂) and 0.83±0.035% in YL(♀)×D(♂), and the YL(♀)×BD(♂) was higher than other two crosses. Weights of belly were 10.28±0.092kg in YL(♀)×B(♂), 10.59±0.133kg in YL(♀)×BD(♂) and 10.25±0.107kg in YL(♀)×D(♂). Consequently, the YL(♀)×BD(♂) cross showed the highest yield. In conclusion, there was no difference in carcass yield of commercial pigs derived from BD (F1) terminal sires with those from D terminal sires. However, weight of belly and AB grade ratio from BD (F1) terminal sires are higher than two others. Therefore, BD (F1) sire could be utilized as terminal one and contribute better profit for the pig industry.

• Molecules and Cells
• /
• v.24 no.1
• /
• pp.132-138
• /
• 2007

4-1BB (CD137), a member of the tumor necrosis factor receptor superfamily, is expressed on activated T-cells, and 4-1BB signaling due to interaction with 4-1BB ligand or ligation with anti-4-1BB monoclonal antibody (mAb) costimulates T cells. It has been shown that administration of anti-4-1BB mAb induces anti-tumor immunity in mice, but the nature of the cellular subsets responsible for this immunity is uncertain. In this study we found that anti-4-1BB mAb administration to B16F10 melanoma-bearing mice induced marked expansion of $CD11c^+CD8^+$ T-cells in parallel with suppression of pulmonary tumors. The mAb-treated mice produced higher levels of $IFN-{\gamma}$ in their tumor tissues, spleen and lymph nodes than mice exposed to control antibody. When the $CD11c^+CD8^+$ T-cells were purified and re-stimulated in vitro, they produced high levels of the Th1 cytokines, $IFN-{\gamma}$ and IL-2, but low levels of the Th2 cytokines, IL-4 and IL-10. Furthermore, they expressed high levels of 4-1BB and CD107a, a marker of activated cytotoxic T-lymphocytes. Our results suggest that $CD11c^+CD8^+$ T-cells play a role in the anti-tumor immunity induced by anti-4-1BB mAb.

• Journal of the Korean institute of surface engineering
• /
• v.51 no.3
• /
• pp.157-163
• /
• 2018

The anodic $TiO_2$ layers which are prepared in various anodization conditions exhibit their specific color depending on the thickness of $TiO_2$. In this study, the relationship between the color of $TiO_2$ layer, which is grown by PEO (Plasma electrolytic oxidation), and the thickness of the $TiO_2$ layer is investigated. To evaluate the color change of the $TiO_2$ layer, the value of color ($dE^*ab$) is measured and calculated by spectrophotometer and chromameter. As a result, it is found that $dE^*ab$ values and thickness of $TiO_2$ layers form a linear relationship with meaningful formular. This formula can be helpful to quantify the thickness of the $TiO_2$ layer by the numerical $dE^*ab$ values. In this process, the spectrophotometer shows more precise results than the chromameter dose. If fluoride ions ($F^-$) are included in the electrolyte, it will affect the $dE^*ab$ values of the $TiO_2$. layer. This is against the propensity, which is analyzed by XRD (X-ray diffraction) and XPS (X-ray photoelectron spectroscopy). It is important that the formular suggested in this study provides other metals which can be also anodized with the possibility of quantifying the thickness of the $TiO_2$ layer by the $dE^*ab$ values.

• Journal of Life Science
• /
• v.15 no.6 s.73
• /
• pp.972-978
• /
• 2005

The present study was carried out to investigate the blood markers of Jeju horses. The redcell cypes (blood groups) and blood protein types (biochemical polymorphisms) were tested from 102 Jeju horses by serological and electrophoretc procedure, and their phenotypes and gene frequencies were estimated. The blood group and biochemical polymorphism phenotypes observed with high frequency were $A^{af}\;(27.45\%$), $C^{a}\;(99.02\%$), $K^{-}\;(97.06\%$), $U^{a}\;(62.75\%$), $P^{b}\;(36.27\%$), $Q^{c}\;(47.06\%$), $D^{cgm/dghm}\;(13.73\%$), $D^{adn/cgm}\;(9.80\%$), $D^{ad/cgm}$\;(8.82\%$), $D^{dghm/dghm}(7.84\%$), $D^{cgm/cgm}(7.84\%$), $AL^{B}\;(48.04\%$), $GC^{F}\;(99.02\%$), $AlB^{K}\;(97.06\%$), $ES^{FI}\;(36.27\%$), $TF^{F2}\;(25.49\%$), $HB^{B1}\;(45.10\%$), and $PGD^{F}\;(86.27\%$) in Jeju horses, respectively. Alleles observed with high gene frequency were $A^{af}$ (0.3726), $A^{C}$ (0.2647), $C^{-}$ (0.5050), $K^{-}$ (0.9853), $U^{-}$ (0.6863), $P^{b}$ (0.4657), $Q^{c}$ (0.5294), $D^{cgm}$ (0.3039), $HB^{B1}$(0.6863), $PGD^{F}$ (0.9265), $AL^{B}$ (0.6912), $ALB^{K}$ (0.9852), $GC^{F}$ (0.9950), $ES^{I}$ (0.5000) and $TF^{F2}$ (0.4950) in Jeju horses, and sfecific alleles, $D^{cgm(f)}$ (0.0196), $HB^{A}$ (0.0147), $HB^{A2}$ (0.0196), $ES^{G}$ (0.0441), $ES^{H}$ (0.0098), $TF^{E}$TF'(0.0246), $TF^{H2}$ (0.0049) and $PGD^{D}$ (0.0098) were detected in Jeju horses. These preliminary results present basic information for detecting the genetic markers in Jeju horse. and developing a system for parentage verification and individuals identification in jeju horses.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.3
• /
• pp.262-269
• /
• 2013

PURPOSE. Perceived color of ceramics changes by the spectral power distribution of ambient light. This study aimed to quantify the amount of shifts in color and color coordinates of clinically simulated seven all-ceramics due to the switch of three ambient light sources using a human vision simulating spectroradiometer. MATERIALS AND METHODS. CIE color coordinates, such as $L^*$, $a^*$ and $b^*$, of ceramic specimens were measured under three light sources, which simulate the CIE standard illuminant D65 (daylight), A (incandescent lamp), and F9 (fluorescent lamp). Shifts in color and color coordinate by the switch of lights were determined. Influence of the switched light (D65 to A, or D65 to F9), shade of veneer ceramics (A2 or A3), and brand of ceramics on the shifts was analyzed by a three-way ANOVA. RESULTS. Shifts in color and color coordinates were influenced by three factors (P<.05). Color shifts by the switch to A were in the range of 5.9 to 7.7 ${\Delta}E{^*}_{ab}$ units, and those by the switch to F9 were 7.7 to 10.2; all of which were unacceptable (${\Delta}E{^*}_{ab}$ > 5.5). When switched to A, CIE $a^*$ increased (${\Delta}a^*$: 5.6 to 7.6), however, CIE $b^*$ increased (${\Delta}b^*$: 4.9 to 7.8) when switched to F9. CONCLUSION. Clinically simulated ceramics demonstrated clinically unacceptable color shifts according to the switches in ambient lights based on spectroradiometric readings. Therefore, shade matching and compatibility evaluation should be performed considering ambient lighting conditions and should be done under most relevant lighting condition.

• Archives of Pharmacal Research
• /
• v.21 no.5
• /
• pp.496-502
• /
• 1998

The present study was carried out to determine the possible use of cTn-I in the cardiac myofibrillar architecture, as a potential target for in vivo radioimmunodetection of cardiac damage in a brain death pig model. Radioiodiantion of the anti-cTn-I 5F4 McAb was carried out by lactoperoxidase method. the percentage iodine incorporation achieved was 70-75%. The radioiodinated McAbs were purified on Sephadex G-25 column and characterised by Paper chromatography, Phast Gel electrophoresis and electroimmunoblotting. Radioiodinated anticTn-I 5F4 McAbs were employed alongside Pyrophosphate($Tc_{99m}$-PPi$) and $Thallium^{201}$ chloride($TI^{201}$) in 24 landrace pigs (brain-dead=18 & sham-operated=6). The percentage cardiac uptake of the radiolabelled antibody injected dose was significantly higher in the brain dead animals(0.196%) as compared to that of sham-operated animals (0.11%). Specific in vivo localization of radiolabelled McAbs in the infarcted cardiac tissue was confirmed by computer-aided reconstruction of 3-D images of the isolated heart. The preliminary results of the study revealed preferential uptake of radiolabelled antibody at the site of myocyte damage resulting from artificially induced brain death.

• Proceedings of the Korean Biophysical Society Conference
• /
• 2003.06a
• /
• pp.76-76
• /
• 2003

We report here the results on N-acetyl-N'-methylamide of 4-fluoroproline (Ac-Flp-NHMe) calculated using the ab initio molecular orbital method with the self-consistent reaction field (SCRF) theory at the HF level with the 6-31+G(d) basis set to investigate the stereoelectronic effects on the conformational preference of proline depending on the cis/trans peptide bonds and down/up puckerings along the backbone torsion angle $\square$ in the gas phase, chloroform, and water. In the gas phase, all potential energy surfaces for Ac-Flp-NHMe are quite similar to those of Ac-Pro-NHMe, except that up-puckered conformations are more stabilized than down-puckered ones. In chloroform and water, polyproline structures become dominant, whose populations are larger than those of Ac-Pro-NHMe. In chloroform and water, the populations of polyproline II (i.e., tF conformations) are quite similar to each other, but those of polyproline I (i.e., cF conformations) are larger by 5％ in water than in chloroform. In particular, all cis populations for Ac-Flp-NHMe in the gas phase, chloroform, and water are decreased than those of Ac-Pro-NHMe.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.12
• /
• pp.2973-2978
• /
• 2009

The decomposition reaction mechanism of $CH_3CF_2O$ radical formed from hydroflurocarbon, $CH_3CHF_2$ (HFC-152a) in the atmosphere has been investigated using ab-initio quantum mechanical methods. The geometries of the reactant, products and transition states involved in the decomposition pathways have been optimized and characterized at DFT-B3LYP and MP2 levels of theories using 6-311++G(d,p) basis set. Calculations have been carried out to observe the effect of basis sets on the optimized geometries of species involved. Single point energy calculations have been performed at QCISD(T) and CCSD(T) level of theories. Out of the two prominent decomposition channels considered viz., C-C bond scission and F-elimination, C-C bond scission is found to be the dominant path involving a barrier height of 12.3 kcal/mol whereas the F-elimination path involves that of a 28.0 kcal/mol. Using transition-state theory, rate constant for the most dominant decomposition pathway viz., C-C bond scission is calculated at 298 K and found to be 1.3 ${\times}$ 10$^4s{-1}$. Transition states are searched on the potential energy surfaces involving both decomposition channels and each of the transition states are characterized. The existence of transition states on the corresponding potential energy surface are ascertained by performing Intrinsic Reaction Coordinate (IRC) calculation.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.3
• /
• pp.389-396
• /
• 2002

The purpose of this study was to compare the microtensile bonding strength of chemomechanically excavated dentin($Carisolv^{TM}$) to conventional caries removal(bur). The following adhesive systems were used; AB: All-Bond 2(3M, USA), PB: Prime & Bond 2.1(Dentsply, DE), AQ: AQ Bond(sun medical, Japan). 42 human molars with occlusal caries were assigned to 6 groups. Sequential caries removal was controlled with laser fluorescence. Each group was devided as follows; group A, B, C were $Carisolv^{TM}$ applied, group D,E,F were bur used. In group A and D, AB was used as a dentin adhesive. group B,E and group C,F was AQ and AQ was used each. The cavity was filled with composite resin(Z-100). The specimens were sectioned vertically into multiple serial 0.7 mm thick slabs. And then those slabs were sectioned into rectangular parts under 0.7 mm width. Finally 0.7-1.0 mm a right hexahedron shape stick become. Microtensile bonding test was carried out with testing apparatus at cross-head speed of $0.5\;mm/min^{-1}$ and fractured surfaces were observed with scanning electron microscope(JSM-6400, Jeol, Japan). The obtained results were summarized as follows ; 1. In the group of caries removal with $Carisolv^{TM}$, micro-tensile bonding strength decreased to $75.8{\sim}80$ percent of bur used group. 2. In the group of caries removal with $Carisolv^{TM}$, decreased degree of micro-tensile bonding strength is not so different in 3 kinds of dentin adhesives(p<0.05). 3. In the group of caries removal with $Carisolv^{TM}$, microtensile bonding strength of AB, PB, AQ was 32.6MPa(2.4), 30.1Mpa (1.8), 21.2Mpa(1.9). 4. In the group of caries removal with Bur and $Carisolv^{TM}$, microtensile bonding strength of AQ was significantly lower than that of AB and PB(p<0.01).

• Bulletin of the Korean Mathematical Society
• /
• v.20 no.1
• /
• pp.31-36
• /
• 1983

Let R be a commutative ring with 1, and A a unitary commutative R-algebra. By a derivation module of A, we mean a pair (M, d), where M is an A-module and d: A.rarw.M and R-derivation, i.e., d is an R-linear mapping such that d(ab)=a)db)+b(da). A derivation module homomorphism f:(M,d).rarw.(N, .delta.) is an A-homomorphism f:M.rarw.N such that f.d=.delta.. A derivation module of A, (U, d), there exists a unique derivation module homomorphism f:(U, d).rarw.(M,.delta.). In fact, a universal derivation module of A exists in the category of derivation modules of A, and is unique up to unique derivation module isomorphisms [2, pp. 101]. When (U,d) is a universal derivation module of R-algebra A, the A-module U is denoted by U(A/R). For out convenience, U(A/R) will also be called a universal derivation module of A, and d the R-derivation corresponding to U(A/R).