• Horticultural Science & Technology
• /
• v.30 no.1
• /
• pp.73-78
• /
• 2012

KC00256, KC00406, KC00462, KC00463, KC00820, and KC00821, the genetic resources that have previously been reported as moderately resistant to Phytophthora capsici, as well as the line KC01322, a new source of moderate resistance introduced from Laos, were tested against two strains (Pc003 and Pc005) of P. capsici. We also determined the nuclear restorer genotypes of these lines, in regards to their interaction with cytoplasmic male sterility, through crossing the resources with cytoplasmic male sterile Punggok-A (Srfrf) and determining the fertility of the $F_1$ hybrids. The studied lines exhibited a low level of resistance to both the strains of P. capsici compared to highly resistant CM334, but their response was fairly consistent for both P. capsici strains. KC00406, KC00462, KC00463, and KC01322 produced stable, male fertile $F_1$ plants indicating that they are restorers with genotype N(S)RfRf. KC00821 produced male sterile $F_1$ plants and was identified as a maintainer with genotype Nrfrf. The $F_1$ plants of the KC00820 cross, however, set a few male fertile flowers in the greenhouse at seedling stage, then became male sterile after being transplanted to the plastic greenhouse soil in May and remained so to the end of the growing season. Therefore, KC00820 is an unstable maintainer with genotype Nrfrf. The moderate resistance exhibited by these genetic resources may be integrated into breeding programs aimed at promoting higher levels resistance via recurrent selection or hybridization.

• Journal of Conservation Science
• /
• v.31 no.3
• /
• pp.267-278
• /
• 2015

In this study, the elastomer cover, a new contact material, was developed to establish the customized ultrasonic measurement considering surface irregularities of stone cultural heritages. The cover exhibits high elastic force and wear resistance because it has tensile strength of 17MPa and elongation of 625%. In addition, as a result of comparative experiments for the seven types according to transducers and contact materials including the elastomer cover, rock surface irregularities significantly affect attenuation of ultrasonic velocity. The phenomenon was more noticeable in the chiseling finish and indirect transmission measurement rather than the dabbed finish and direct transmission measurement. However, the Type F using the exponential transducer and elastomer cover showed stable P-wave velocity and high amplitude regardless of the surface irregularities. This because the elastomer cover sufficiently sticks to surface irregularities and removes pores between a transducer and a rock specimen. Therefore, the Type F should be used for the ultrasonic measurement of stone cultural heritages with surface irregularities.

• BMB Reports
• /
• v.40 no.2
• /
• pp.163-171
• /
• 2007

Functional elements of the conserved helix 7 in the poreforming domain of the Bacillus thuringiensis Cry $\delta$- endotoxins have not yet been clearly identified. Here, we initially performed alanine substitutions of four highly conserved aromatic residues, $Trp^{243}$, $Phe^{246}$, $Tyr^{249}$ and $Phe^{264}$, in helix 7 of the Cry4Ba mosquito-larvicidal protein. All mutant toxins were overexpressed in Escherichia coli as 130-kDa protoxins at levels comparable to the wild-type. Bioassays against Stegomyia aegypti mosquito larvae revealed that only W243A, Y249A or F264A mutant toxins displayed a dramatic decrease in toxicity. Further mutagenic analysis showed that replacements with an aromatic residue particularly at $Tyr^{249}$ and $Phe^{264}$ still retained the high-level toxin activity. In addition, a nearly complete loss in larvicidal activity was found for Y249L/F264L or F264A/ Y249A double mutants, confirming the involvement in toxicity of both aromatic residues which face towards the same direction. Furthermore, the Y249L/F264L mutant was found to be structurally stable upon toxin solubilisation and trypsin digestion, albeit a small change in the circular dichroism spectrum. Altogether, the present study provides for the first time an insight into the highly conserved aromaticity of $Tyr^{249}$ and $Phe^{264}$ within helix 7 playing an important role in larvicidal activity of the Cry4Ba toxin.

• Journal of fish pathology
• /
• v.20 no.3
• /
• pp.307-313
• /
• 2007

In this study, a QCM biosensor was made to detect Edwardsiella tarda (E. tarda) using a specific antibody. A 9 MHz AT-cut piezoelectric wafer layered with two gold electrodes of 5mm diameter had a reproducibility of 0.1 Hz in frequency response and was used as the transducer of the QCM biosensor. Self assembled layer (SAM) was conformed on a quartz crystal by treating with 3-mer-captopropionic acid (MPA) and activated with N-ethyl-N'-(3-dimethyl-aminopropyl) carbodiimide (EDC) and N-hydroxysuccinimide (NHS). The resulting NHS group was further converted to hydrazide by the reaction with hydrazine. Aldehyde group was introduced into the carbohydrate moiety of anti-E. tarda antibody by the reaction with periodic acid and was used to immobilise the antibody through the reaction with hydrazide group on the electrode surface. A baseline was established in the presence of phosphate-buffered saline (PBS) and a resonant frequency (F1) was measured. Sample was added to the sensor surface and second resonant frequency (F2) was measured after unbound substances were washed out with PBS several times. Finally, the frequency shift (ΔF) representing the mass change was calculated by subtracting F2 from F1. After adding the oxidized anti-E. tarda antibody to the electrode surface containing hydrazide group, frequency shift of 288.811.4 Hz (mean S.E) was observed, thus proving that considerable amount of antibody was immobilized. In the immunoassay test, the frequency shift of 1877.75 Hz, 580.67 Hz, 221.39 Hz, 7.671.83 Hz (mean S.E) were observed at doses of 1000, 500, 100, 50 g of bacterial cells, respectively. It was also demonstrated that the prepared sensor chip was stable enough to withstand repeated surface regeneration with 0.2 M Tris-glycine and 1 % DMSO, pH 2.3 more than ten times.

• Korean Journal of Food Science and Technology
• /
• v.26 no.1
• /
• pp.93-97
• /
• 1994

A study of physical and chemical characteristics of pigments from Rhodopseudomonas viridis DSM 133 was carried out for development of natural greenish colorant. Through visible absorption scanning, it showed three main absorption peaks at 378, 414 and 677 nm with three minor peaks at 510, 540 and 618nm, and it was shown to be greenish color. These pigments were more stabilized in alkaline solutions than in acid of between pH 6 and 9, and it was shown to be stabilized at the temperature below $40^{\circ}C$. In the presence of light and oxygen, the stability of pigments rapidly degraded, and it became unstable in the presence of metal ion such as $Fe^{3+}$ and $Al^{3+}$. But in the presence of $Cu^{2+}$ were very stable. On the result of TLC analysis, pigments were shown to be composed of four color fractions and main color fractions were F-4 and F-2.

• Korean Journal of Environment and Ecology
• /
• v.11 no.2
• /
• pp.166-176
• /
• 1997

To investigate the vegetation structure of Fraxinus mandshurica communith, twenty plots were set up and surveyed in the valley of Mt. Minjuji area that rises 700~1,100m above the sea level. Each plot has 100m$^{2}$ in size. By using the TWINSPAN of classification technique, total plots was divided into six communities. In the species composition analysis, it was expected that F. mandshurica community would derive from Quercus mongolica community. The F. mondshurica community was composed together of Carpinus laxiflora, Acer mono and Cornus controversa. It was turned out that F. mandshurica community was edaphic climax because the competition species not appeared. In the DBH distribution analysis, F. mandshurica appeared through all layers, and species diversity showed lower index(Shannon's index 0.72~0.82) because the community was stable. The number of mean individuals and species was about 111.5 and 11.0 per 100m$^{2}$ respectively.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.2 no.2
• /
• pp.13-22
• /
• 1998

This paper summarizes a study on the application of the friction pendulum system in bridge seismic isolation. Shaking table tests have been carried out on a model structure isolated with F.P.S and the obtained structural responses are compared to those of non-isolated. It can be concluded the F.P.S increases the earthquake resistance capacity of the isolated structure. It is also found that the stiffness of bearing, being controlled by the radius of curvature of the spherical sliding interface, is unaffected by the amplitude of the input excitation. Furthermore, the coefficient of sliding friction is velocity dependent so that in weak excitation the sliding velocity is low and, accordingly, the mobilized friction force is less than the one mobilized in strong excitation. Also, the frictional properties of the bearings remain markedly stable after extensive testing, and the permanent displacements are small and not cumulative in successive earthquakes.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.3
• /
• pp.775-782
• /
• 2014

The importance of including spin-orbit interactions for the correct description of structures and vibrational frequencies of haloiodomethanes is demonstrated by density functional theory calculations with spin-orbit relativistic effective core potentials (SO-DFT). The vibrational frequencies and the molecular geometries obtained by SO-DFT calculations do not match with the experimental results as well as for other cations without significant relativistic effects. In this sense, the present data can be considered as a guideline in the development of the relativistic quantum chemical methods. The influence of spin-orbit effects on the bending frequency of the cation could well be recognized by comparing the experimental and calculated results for $CH_2BrI$ and $CH_2ClI$ cations. Spin-orbit effects on the geometries and vibrational frequencies of $CH_2XI$ (X=F, Cl, Br, and I) neutral are negligible except that C-I bond lengths of haloiodomethane neutral is slightly increased by the inclusion of spin-orbit effects. The $^2A^{\prime}$ and $^2A^{{\prime}{\prime}}$ states were found in the cations of haloiodomethanes and mix due to the spin-orbit interactions and generate two $^2E_{1/2}$ fine-structure states. The geometries of $CH_2XI^+$ (X=F and Cl) from SO-DFT calculations are roughly in the middle of two cation geometries from DFT calculations since two cation states of $CH_2XI$ (X=F and Cl) from DFT calculations are energetically close enough to mix two cation states. The geometries of $CH_2XI^+$ (X=Br and I) from SO-DFT calculations are close to that of the most stable cation from DFT calculations since two cation states of $CH_2XI$(X=Br and I) from DFT calculations are energetically well separated near the fine-structure state minimum.

• 한국해양학회지
• /
• v.29 no.3
• /
• pp.258-268
• /
• 1994

Nitrogenous new production and regenerated production were measured in the southern part of the Yellow Sea (Hwanghae) using a stable isotope /SUP 15/N nitrate and ammonia between April 25∼30, 1993. Nitrogen production varied between 155 and 688 mg N m/SUP -2/ d/SUP -1/, which belongs to meso to eutrophic area values. This is equivalent to 881∼3909 mg C m/SUP -2/ d/SUP -1/, assuming the Redfield ratio for C:N of 5.7:1 (by weight). the f0ratio which is the fraction of new production from primary production, varied between 0.12 and 0.26, indicating that 74 to 88% of primary production was supported by the regeneration of nutrients within the euphoric zone. This low f0ratio is the characteristics of the oligo- to mesotrophic area. Contrary to the expected, the ambient nutrient concentration was not an important factor for controlling productivity in this area during the study period. The difference in productivity among stations was mainly due to the variations in phytoplankton biomass in different water masses.

• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.304-310
• /
• 2015

A SCALDO(Supercapacitor Assisted LDO) regulator is a new regulator having advantages of a SMPS(Switch Mode Power Supply) which has a good efficiency and a LDO(Low Drop-out) regulator which has stable output characteristics and good EMI(Electro Magnetic Interference) characteristics. However, a conventional SCALDO regulator needs a lot of power consumption to control its switches and it drops an efficiency of the circuit. In this paper, to reduce switching power consumption and improve an efficiency of the circuit, a new SCALDO regulator adopting MOSFETs as its switching parts is proposed and it is found out that the proposed SCALDO regulator has the maximum 9.5% higher efficiency than the conventional SCALDO regulator. We also try to simplify production process of the circuit by changing switching control method of the circuit from MCU(Micro-controller unit) based firmware control to hardware control using a comparator and a T-F/F(Flip Flop).