Recently, 3D printing using a material extrusion method is used in various fields. Since plastic material has lower strength than steel, research to increase the strength is continuously being conducted. This study investigates the lattice structure for additive manufacturing of six 3D infill patterns (octet, quarter cubic, cubic, cubic subdivision, triangles and cross 3D) which consist of tetragons, hexagonal trusses, equilateral triangles and cross shapes. Consequently, in the tensile strength considering the weight and printing time, octet, quarter cubic, cubic and triangles patterns tended to increase linearly as the infill density increased, except for the infill density of 20%. However, the tensile strength/weight performed better than the infill density of 100% when the cubic subdivision pattern had the infill density of 20% and the cross 3D pattern had the infill density of 40%. Considering the weight and printing time, the infill patterns of high tensile strength were octet, quarter cubic, cubic, cubic subdivision, triangles and cross 3D order.
Derya Deniz-Sungur;Mehmet Ali Onur;Esin Akbay;Gamze Tan;Fugen Dagli-Comert;Taner Cem Sayin
Restorative Dentistry and Endodontics
/
제47권2호
/
pp.18.1-18.9
/
2022
Objectives: This study evaluated alterations in neuronal conductivity related to calcium silicate cements (CSCs) by investigating compound action potentials (cAPs) in rat sciatic nerves. Materials and Methods: Sciatic nerves were placed in a Tyrode bath and cAPs were recorded before, during, and after the application of test materials for 60-minute control, application, and recovery measurements, respectively. Freshly prepared ProRoot MTA, MTA Angelus, Biodentine, Endosequence RRM-Putty, BioAggregate, and RetroMTA were directly applied onto the nerves. Biopac LabPro version 3.7 was used to record and analyze cAPs. The data were statistically analyzed. Results: None of the CSCs totally blocked cAPs. RetroMTA, Biodentine, and MTA Angelus caused no significant alteration in cAPs (p > 0.05). Significantly lower cAPs were observed in recovery measurements for BioAggregate than in the control condition (p < 0.05). ProRoot MTA significantly but transiently reduced cAPs in the application period compared to the control period (p < 0.05). Endosequence RRM-Putty significantly reduced cAPs. Conclusions: Various CSCs may alter cAPs to some extent, but none of the CSCs irreversibly blocked them. The usage of fast-setting CSCs during apexification or regeneration of immature teeth seems safer than slow-setting CSCs due to their more favorable neuronal effects.
목적: 하악 제1대구치 상실 시 인접 및 대합 치아들의 경사 및 정출 정도에 따른 교합력의 변화를 스트레인게이지를 이용하여 측정 및 비교하는 것이다. 연구 재료 및 방법: 인접 및 대합 치아들의 경사 및 정출이 심화되는 정도를 점진적으로 네 개의 다이에 표현 후, CAD/CAM 제작 맞춤형 다이 시스템을 통하여 주모형에 부착 및 교체 가능하도록 하였다. 치아에 스트레인게이지를 부착 후, 만능물성시험기로 저작력을 가하면서 상하악 치아의 교합력을 측정하였다. 통계처리는 독립표본 t검증과 일원배치 분산분석을 시행하였다(${\alpha}=.05$). 결과: 대구치 상실 후 치아이동에 따른 교합력의 양상은, 네 단계의 모형에 대한 교합력의 차이가 통계적으로 유의하였고, 감소 추세였다. 음식물 저작 시 인접 치아들의 이동에 따라 상악 제1, 2소구치, 하악 제2대구치에서 점차 교합력이 감소되었다. 음식물의 경도가 감소함에 따라 치아의 교합력이 점차적으로 감소하였다. 육포 저작 시 하악 제2대구치의 교합력이 가장 높게 측정되었다(P < 0.05). 결론: 하악 제1대구치가 상실되고 치아 이동이 일어나기 전에는 저작 시 치아가 상실되지 않았을 때에 비해 인접 및 대합 치아들의 교합력이 높은 반면, 치아 이동이 진행됨에 따라 교합력은 정량적으로 감소하였다.
전자 통신 분야에서 히트파이프를 활용한 방열기술은 점차 늘어나고 있다. 특히 전자 패키지 응용에서는 원형 단면 히트파이프에 비해 평판 형상의 얇은 히트파이프가 보다 더 적용하기에 용이하다. 압출 공정에 기반한 평판 히트파이프는 내벽에 사각 단면 그루브들로 이루어진 단순한 모세관 윅 구조를 갖는다. 그루브 윅이 내벽에 다수 개 설치가 된다고 하더라도 상대적으로 높은 모세관력을 달성하기는 어렵다. 본 연구에서는 그루브 윅의 모세관력 향상을 위해 와이어 다발을 적용한 평판 히트파이프의 제작 및 성능평가 실험을 수행하였다. 실험을 통해 와이어 다발을 윅으로 갖는 평판 히트파이프의 열저항 및 열전달률이 그루브 윅 평판 히트파이프에 비해 각각 3.4배와 3.8배 가량 우수한 것으로 나타났다. 본 연구를 통해 와이어 다발을 통한 모세관력 향상 효과를 실험적으로 확인하였으며, 향후 상용화를 위한 연구를 진행할 계획이다.
스크류조합을 달리한 실험실용 twin-screw extruder를 사용하여 corn grit를 원료 투입량($30{\sim}60\;kg/hr$), 스크류 회전속도($200{\sim}400\;rpm$) 및 die hole 수($2{\sim}6$개) 범위에서 압출하면서 측정된 system parameters(압출온도, 기계적 에너지 소모율, 평균 체류시간)가 압출물의 특성을 나타내는 target parameters(수분 증발량, 수분 용해도지수 및 수분 흡착지수)에 미치는 영향을 스크류 조합별과 전체 실험결과를 다중회귀분석을 통하여 회귀식으로 나타내면, 스크류조합별 관계식에서는 상관계수가 0.90 이상 이었으며, 구획하지 않은 전체 회귀식에서는 0.80 정도의 상관계수를 보였다. 이상의 결과는 system analysis approach을 이용하면, 상이한 extruder사이의 조업자료 중 system parameters의 분석을 통하여 목적 제품의 특성을 예측할 수 있는 가능성을 보여준다고 생각된다.
Objectives : This study was performed to assess the effectiveness of conservative Korean traditional medical treatment on lumbar intervertebral disc herniation in 12 adolescents. Methods : Data were collected from adolescent patients diagnosed with lumbar intervertebral herniation by MRI, hospitalized at Jaseng Korean Medicine Hospital from January 1, 2014 to December 31, 2015. A total of 12 patients were included in the study. Patients were treated by acupuncture, pharmacopuncture, electroacupuncture, herbal medicine, chuna manual therapy, physical therapy during hospitalization period. To measure treatment outcomes, a verbal numerical rating scale (VNRS), Oswestry disability index (ODI), range of motion (ROM), Straight leg raising test (SLR), and EQ-5D were used. Results : The average age of the participants was $16.05{\pm}1.62$. The average of duration of symptom was $19.25{\pm}26.83(weeks)$ and the average length of hospitalization was $23.8{\pm}16.4(days)$. 2 patients (17 %) suffered from only lumbar pain, while 10 patients (83 %) suffered from lumbar and leg pain. No participant suffered from only leg pain. 8 patients (67 %) were diagnosed with disc herniation in one segment, and 4 patients (33 %) were diagnosed with disc herniation in multiple segments. A total of 17 disc segments (28 %) were herniated. The most herniated lumbar level was L4-5. 3 segments were diagnosed with bulging (17 %), 6 with protrusion (35 %), and 8 with extrusion (47 %). Extrusion was the most frequent herniated type. After treatment, the average VNRS of lumbar pain significantly decreased from $5.58{\pm}1.62$ to $2.91{\pm}1.56$ (p<0.001) and the average VNRS of leg pain significantly decreased from $5.16{\pm}2.51$ to $3.08{\pm}1.8$ (p<0.001). ODI significantly decreased from $48.87{\pm}18.72$ to $28.57{\pm}15.05$ (p<0.05), and EQ-5D significantly increased $0.58{\pm}0.31$ to $0.80{\pm}0.12$ (p<0.05). Range of flexion significantly improved from $61.25{\pm}32.62$ to $68.33{\pm}26.22$ (p<0.05). Conclusion : Conservative Korean Traditional Medical Treatment may be effective in the treatment of lumbar intervertebral disc herniation in adolescence. However, more case reports and clinical research are needed.
최근 건설분야에서 고기능화의 추구와 국제적 물가 상승에 기인하여 건설산업에 있어서 공기 단축과 건식공법에 의한 경제적 비용 절감을 추구함과 동시에 시멘트를 사용한 2차 제품의 적용이 점차 증대되고 있으나, 아직까지 건축 내 외장에서의 패널이나 기능적인 보수 보강 측면에서의 용도로만 사용하는데 국한되어 있어, 구조적인 성능이나 내구적인 성능의 개선을 위한 대책이 시급한 실정이다. 이에 따라 본 연구에서는 건설분야에 있어서 구조적 성능과 내구적 성능이 우수한 영구 거푸집의 적용가능성을 검토하고, 제조성능과 품질에 있어서 최적의 배합을 도출하고자 한다. 따라서, 4조건의 배합에 따른 진공압출성형 고인성 시멘트 패널의 역학 및 내구적 특성을 비교 분석한 결과 소량의 충전재와 다량의 고로슬래그 미분말 및 분말내화재료를 사용한 ECC-DP3의 시험체가 우수한 상대경도와 휨응력변형을 나타내었으며, 내구적 성능에서도 공극률 감소 및 수밀성 향상에 의해 우수한 경향을 나타내었다.
Objectives: 3D printing technologies have become widely developed and are increasingly being used for a variety of purposes. Recently, the evaluation of 3D printing operations has been conducted through chamber test studies, and actual workplace studies have yet to be completed. Therefore, the objective of this study was to determine the emission of volatile organic compounds(VOCs), metals, and particles from printing operations at a workplace. This included monitoring conducted at a commercial 3D printing service workplace where the processes involved material extrusion, material jetting, binder jetting, vat photo polymerization, and powder bed fusion. Methods: Area samples were collected with using a Tenax TA tube for VOC emission and MCE filter for metals in the workplace. For particle monitoring, Mini Particle Samplers(MPS) were also placed in the printer, indoor work area, and outdoor area. The objective was to analyze and identify particles' size, morphology, and chemical composition using transmission electron microscopy with energy dispersive spectroscopy(TEM-EDS) in the workplace. Results: The monitoring revealed that the concentration of VOCs and metals generated during the 3D printing process was low. However, it also revealed that within the 3D printing area, the highest concentration of total volatile organic compounds(TVOC) was 4,164 ppb at the vat photopolymerization 3D printing workplace, and the lowest was 148 ppb at the material extrusion 3D printing workplace. For the metals monitoring, chromium, which, is carcinogenic for humans, was detected in the workplace. As a characteristic of the particles, nano-sized particles were also found during the monitoring, but most of them were agglomerated with large and small particles. Conclusions: Based on the monitoring conducted at the commercial 3D printing operation, the results revealed that the concentration of VOCs and metals in the workplace were within Korea's occupational exposure limits. However, due to the emission of nano-sized particles during 3D printing operations, it was recommended that the exposure to VOCs and metals in the workplace should be minimized out of concern for workers' health. It was also shown that the characteristics of particles emitted from 3D printing operations may spread widely within an indoor workplace.
Frequency-force relationships (FFR) were studied in electrically field stimulated rat left atria (LA) by reducing the stimulation frequency from resting 3 Hz to test frequencies (0.1-1 Hz) for 5 minutes. The twitch amplitudes of LA elicited the typical negative staircases with 3-phased changes: the initial rapid increase, the second decrease and the following plateau at test frequencies. Verapamil $(3{\times}10^{-5}\;M)$ pretreatment elicited frequency-dependent suppression of the twitch amplitudes, exaggerating the negative staircase. Monensin pretreatment enhanced not the peak but the plateau amplitudes in a concentration-dependent manner. When the $Na^+-Ca^{2+}$ exchange was blocked by $Na^+\;and\;Ca^{2+}$ depletion in the Krebs Hensleit buffer (0 $Na^+-0\;Ca^{2+}$ KHB), the twitch amplitudes increased in a frequency-dependent manner, changing the negtive staircase into the positve one. Meanwhile, the 0 $Na^+-0\;Ca^{2+}$ KHB applicationinduced enhancement was strongly suppressed by caffeine (5 mM) pretreatment. Only dibucaine among the local anesthetics increased the basal tone during frequency reduciton. There were no differences in $^{45}Ca$ uptakes between 0.3 Hz and 3 Hz stimulation except at 1 min when it was significantly low at 0.3 Hz than 3 Hz, illustrating net $Ca^{2+}$ losses. Monensin pretreatment enhanced the rate of this $Ca^{2+}$ loss. Taken together, it is concluded that $Na^+-Ca^{2+}$ exchange extrudes more SR released $Ca^{2+}$ out of the cell in proportion to the frequency, resulting in the negative rate staircase in the rat LA.
Lee, Deuck Hang;Park, Min-Kook;Oh, Jae-Yuel;Kim, Kang Su;Im, Ju-Hyeuk;Seo, Soo-Yeon
Computers and Concrete
/
제14권3호
/
pp.211-231
/
2014
Prestressed hollow-core slabs (HCS) are widely used for modern lightweight precast floor structures because they are cost-efficient by reducing materials, and have excellent flexural strength and stiffness by using prestressing tendons, compared to reinforced concrete (RC) floor system. According to the recently revised ACI318-08, the web-shear capacity of HCS members exceeding 315 mm in depth without the minimum shear reinforcement should be reduced by half. It is, however, difficult to provide shear reinforcement in HCS members produced by the extrusion method due to their unique concrete casting methods, and thus, their shear design is significantly affected by the minimum shear reinforcement provision in ACI318-08. In this study, a large number of shear test data on HCS members has been collected and analyzed to examine their web-shear capacity with consideration on the minimum shear reinforcement requirement in ACI318-08. The analysis results indicates that the minimum shear reinforcement requirement for deep HCS members are too severe, and that the web-shear strength equation in ACI318-08 does not provide good estimation of shear strengths for HCS members. Thus, in this paper, a rational web-shear strength equation for HCS members was derived in a simple manner, which provides a consistent margin of safety on shear strength for the HCS members up to 500 mm deep. More shear test data would be required to apply the proposed shear strength equation for the HCS members over 500 mm in depth though.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.