• 자원리싸이클링
• /
• 제19권5호
• /
• pp.31-43
• /
• 2010

석탄가스화 복합발전 시스템의 집진설비용 다공성 탄화수소 캔들 필터 제조를 위해 래밍성형과 진공 압출성형 공정에 외해 캔들필터 성형체를 제조하였다. 다양한 입도를 갖는 탄화규소 분말을 출발원료로 하였으며, 비점토계 무기 소결조제로 뮬라이트와 칼슘 카보네이트 분말을 사용하였다. 래밍성형과 진공 압출성형에 의한 캔들 필터 성형체들은 대기 분위기 $1400^{\circ}C$에서 2시간 소성하여 제조하였다. 캔들 필터 성형공정과 출발원료 입도가 소결된 다공성 캔들 필터 지지층의 기공율, 밀도, 강도 (굽힘강도, 압축강도)와 미세구조에 미치는 영향을 조사하였다. 래밍성형 공정에 외한 제조원 다공성 탄화규소 캔들 필터 소결체가 압출성형된 필터에 비해 높은 밀도 및 강도를 나타내고 있었으며, 그 최고 값은 각각 $2.0\;g/cm^3$과 45 MPa이었다. 한편 캔들 필터 지지층의 장기 내식성 평가 예측을 위하여 소결된 시편에 대해 석탄가스화 복합발전 $600^{\circ}C$의 모사 합성가스 분위기에서 2400시간 부식실험을 수행하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권8호
• /
• pp.348-353
• /
• 2003

This paper was the research of high voltage suspension insulator (400 [kN]) including pottery stone, feldspar, clay and alumina of 17 [wt%]. The slurry was fabricated after ball milling mixed raw materials. Green compacts were made by the extrusion of jiggering method and were sintered at 1300[$^{\circ}C$] for 50 [min.] in the tunnel kiln. The sintered density was reached to 97% of theoretical density, and the bending strength was 1658 [k $g_{f}$/$\textrm{cm}^2$] and hardness and fracture toughness which was measured by ICL( indentation crack length ) method were 1658 (kgf/$\textrm{cm}^2$) and 27.5 [Gpa], respectively. In measurement of tana and insulation break voltage of 400 (kN) porcelain, tan$\delta$ took some numerical value between 17${\times}$10$_{-3}$ and 61${\times}$10$_{-3}$ and insulation break voltage value was 19.9$\pm$1.4 [㎸/mm]. The test was performed to research whether the shape of pin affect a overvoltage break load or not As a consequence, when a pin was designed a pin diameter 51 [mm] with the bottom form of two-step constructed with straight in the suspension insulator, Insulator showed overvoltage break load 52 [ton] of the highest value and reflected a fine characteristic in aged deterioration test which is one of the accelerated aging test. Also it could be confirmed a fine characteristic through performing the test that electrical property of insulator was established correctly in accordance with IEC 60383-1 standards.s.

• 대한치과교정학회지
• /
• 제24권3호
• /
• pp.621-630
• /
• 1994

The purpose of this study was to evaluate root resorption and alveolar bone resorption pattern by jiggling movement. 16 adult cats were divided into 4 groups(6, 12, 18, 24 days). In test side, mesio-distal jiggling force was applied in right maxillary 1st premolar in 3 days cycle In control side, mesial force was applied in left maxillary 1st premolar. Radiographic and histologic observation were performed in 6, 12, 18, 24 days after force application. The results were as follow: 1. Alveolar bone resorption was more severe by jiggling force than by unidirectional force. 2. Root resorption pattern was not different between jiggling force and unidirectional force. 3. Combined pattern of bone resorption and new bone formation appeared in jiggling group. 4. New bone formation began to appear at periapical area of jiggling group after 24 days, because alveolar bone resorption was severe and extrusion resulted.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.193-200
• /
• 1999

Since Broms and Bennermark(1967) suggested the face stability criterion based on laboratory extrusion tests and field observations, the face stability of a tunnel driven in cohesive material has been studied by several authors. And recently, more general solution for the tunnel front is given by Leca and Panet(1988). They adopted a limit state design concept to evaluate the face stability of a shallow tunnel driven into cohesionless material and showed that the calculated upper bound solution represented the actual behavior reasonably well. In this study, two factors are simultaneously considered for assessing tunnel face stability: One is the effective stress acting on the tunnel front calculated by upper bound solution; and the other is the seepage force calculated by numerical analysis under the condition of steady state ground water flow. The model tests were performed to evaluate the seepage force acting on the tunnel front and these results were compared with results of numerical analysis. Consequently, the methodology to evaluate the stability of a tunnel face including limit analysis and seepage analysis is suggested under the condition of steady state ground water flow.

• 생약학회지
• /
• 제16권4호
• /
• pp.221-226
• /
• 1985

To screen biologically active components of the higher fungi of Korea, the dried carpophores of Auricularia polytricha were extracted with water. The extract was examined for acute toxicity in ICR mice. A low molecular weight toxin of this fungus was purified by acetone precipitation followed by cellulose, silica gel and LH-20 Sephadex column chromatography. Major symptoms of this toxin were eye extrusion, hair erection, trembling of head, paralysis, rapid running or moving before death and depression of respiration. The median lethal doses of the total extract were 1.25 g/kg and 4.18 g/kg by i.p. and p.o. administrations, respectively. The amounts of one mouse lethal unit (MLU) of the total extract and final fraction that killed a 20-g mouse within 30 minutes were 28.5 mg/mouse and 12 mg/mouse, respectively.

• 한국정밀공학회지
• /
• 제12권9호
• /
• pp.126-136
• /
• 1995

Copper magnetron anode of a microsave-over consists of an cylindrical outer-tube and various inner-vanes. The magnetron anode is produced by the complex processes; vane blanking, pipe cutting and silver-alloy brazing of vanes. Recently, the backward extrusion process for forming vanes has been developed to avoid the complex procedures. The developed process is analyzed by using upper-bound elemental technique (UBET). In the UBET analysis, the upper-bound load, the configuration and the vane-height of final extruded product are determined by minimizing the roral power consumption with repect to chosen parameters. To verify theoretical analysis, experiments have been carried out with pure plasticine billets at room temperature, using different web-thickness and number of vanes. The theoretical predictions both for forming load and vane-height are in reasonable agreement with the experimental results.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 추계 학술논문 발표대회
• /
• pp.193-197
• /
• 2008

This study enforced to produce the planting concrete block which could be applied to various slopes economically. First of all, the physical properties was investigated with the various types of aggregate and aggregate ratio of the paste for the lead to mixture proportion of the planting concrete. As a result, the orchid stone as aggregate and 30% of aggregate ratio of the paste were used as the basic mixture proportion considering 20~30% of maintained void ratio for the growth of plant, over 20% of capillary suction for holding water, and 3MPa as the minimum strength. For the result of the test to the new planting block which was quite different from existing planting concrete block, it could complement the problems and be possible to produce effectively and economically because various slopes like 40ﾟ~75ﾟ, continual produce by extrusion, and pumping out were possible were possible.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.1093-1097
• /
• 1996

The Substitution development of 7075-T6 Al alloy to 7050-T74 Al alloy in small arms to improve anti-stress corrosion cracking was processed along with mass productivity consideration. To meet 7050 Al alloy material characteristics Indirect extrusion type was adopted and local heating above recrystalization temperature in forging process had to be avoided. The T74 aging treatment was 12$0^{\circ}C$ -6hrs and 175$^{\circ}C$ -12hrs and was appropriate for both machanical and anti-cohesion properties. In accessment of field application test 7050Al alloy made parts of small arms showed equivalent or better performance than 7075 Al alloy.

• 소성∙가공
• /
• 제8권6호
• /
• pp.626-633
• /
• 1999

$Al_{85}Ni_{10}Y_5$ (at. %) amorphous alloy ribbons have been produced by rapidly solidification process and consolidated by the conventional powder metallurgy method. The grains with ∼90 nm were obtained in the Al85Ni10Y5 alloy extrudates by hot-pressing followed by hot-extusion. To investigate the effect of heat treatment on microstructural change of the extrudates, heat treatment was carried out from 200℃ to 400℃ at the step of 50℃. In addition, mechanical properties of the extrudates were analysed from torsion test at the temperature range or 400∼500℃ under a strain rates of 0.2, 0.5, and 1.0/sec. The extrudates showed a flow stress of ∼190 MPa and low elongation of ∼150% at 400℃, contributing to the enhancement of ductility and hardness for extrudates. Also, grain boundary sliding was occurred in the $Al_{85}Ni_{10}Y_5$ alloy during hot deformation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.232-237
• /
• 1999

The standardization urban transit project has been started by government and the Korean standard electrical railcar has been designed. The bodyshell of standard railcar is made of aluminium alloy. In the present paper, the design of its bodyshell is evaluated in the viewpoint of strength analysis. The loading condition is based on the 'Test Methods of Static Load for Body Structure of Electrical Multiple Unit', standard specification. The bodyshell of Korean standard EMU consist of longitudinal extrusion members which are double-skin structure type. For the purpose of security and lightening we decided the section of the aluminium carbody through the size optimization in this paper Hereafter this paper will contribute to the shape optimization.