Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지

Bulk Processing of an Amorphous $AI_{85}Ni_{10}Y_{5}$ Alloy Ribbon and Mechanical Properties by Annealing Treatment

비정질 $AI_{85}Ni_{10}Y_{5}$ 합금 리본의 벌크화와 어닐링에 따른 기계적 특성

  • 고병철 (인하대학교 공과대학 금속공학과) ;
  • 김종현 (인하대학교 공과대학 금속공학과) ;
  • 유연철 (인하대학교 공과대학 금속공학과)
  • Published : 1999.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

$Al_{85}Ni_{10}Y_5$ (at. %) amorphous alloy ribbons have been produced by rapidly solidification process and consolidated by the conventional powder metallurgy method. The grains with ∼90 nm were obtained in the Al85Ni10Y5 alloy extrudates by hot-pressing followed by hot-extusion. To investigate the effect of heat treatment on microstructural change of the extrudates, heat treatment was carried out from 200℃ to 400℃ at the step of 50℃. In addition, mechanical properties of the extrudates were analysed from torsion test at the temperature range or 400∼500℃ under a strain rates of 0.2, 0.5, and 1.0/sec. The extrudates showed a flow stress of ∼190 MPa and low elongation of ∼150% at 400℃, contributing to the enhancement of ductility and hardness for extrudates. Also, grain boundary sliding was occurred in the $Al_{85}Ni_{10}Y_5$ alloy during hot deformation.

Keywords

References

  1. Acta Metall. v.19 The Mechanical Properties of Paladium 20a/o Quenched from the Liquid State T.Masumoto;R.Maddin
  2. Bull. of the Kor. Inst. of Met. & Mater. v.5 강력 비정질 경합금 개발 김영환;정병호;김창주;조형호
  3. J. Mater. Sci. v.18 Formation and Crystallization of Al-Fe-Si Amorphous Alloys R.O.Suzuki;Y.Komatsu;K.E.Kobayashi;P.H.Singu
  4. Jpn. J. of Appl. Phys. v.27 New Amorphous Al-Ln(Ln=Pr, Nd, Sm or Gd) Alloys Prepared by Melt Spinning A.Inoue;K.Ohtera;Z.Tao;T.Masumoto
  5. Jpn. J. Appl. Phys. v.27 Glass Transition Behavior of Al-Y-Ni and Al-Ce-Ni Amorphous Alloys A.Inoue;K.Ohtera;A.P.Tsai;H.M.Kimura;T.Masumoto
  6. Mater. Trans. v.32 Increase in Mechanical Strength of Al-Y-Ni Amorphous Alloys by Dispersion of Nanoscale FCC-Al Particles Y.H.Kim;A.Inoue;T.Masumoto
  7. J. of the Korean Inst. of Met. & Mater v.34 알루미늄 나노입자 분산형 알루미늄-천이금속(또는 천이금속)계 비정질 합금의 기계적 특성 윤광민;김영환;정병호;김인배
  8. Rapidly Quenched Metals D.G.Morris;S.Steeb(ed.);H.Warlimont(ed.)
  9. Rapidly Quenched Metals R.Hasegawa;C.F.Cline;S.Steeb(ed.);H.Warlimont(ed.)
  10. The Inter, J. of Powder Metall. v.33 Fabrication of Bulk Amorphous Alloys by Powder Consolidation Y.Kawamura;H.Kato;A.Inoue;T.Masumoto
  11. 대한금속학회지 v.36 나노결정립 크기의 $Al_{85}Ni_{10}Y_5$ 합금 압출재의 제조 및 고온변형 특성에 관한 연구 고병철;유연철
  12. 한국소성가공학회지 v.7 Al-Ni-Y 합금 비정질 리본의 열적 특성 및 리본 압출재의 고온변형 특성 고병철;유연철
  13. Mater. Sci. and Eng. v.A137 Tsenev, Plastic Deformation of Alloys with Submicron-grained Structure R.Z.Valiev;N.A.Krasilnikov;N.K
  14. Acta Metall. v.29 Levchenko, Investigation of Structural Changes during Superplastic Deformation of Zn-22% Al Alloy by Replica Locating Technique I.I.Novikov;V.K.Portnoy;V.S.