• 설비공학논문집
• /
• 제2권4호
• /
• pp.268-278
• /
• 1990

Hydrodynamic stability equations are formulated for natural convection flows adjacent to a heated or cooled, inclined, isothermal surface in pure water at $4^{\circ}C$, where the density variation with temperature becomes nonlinear. The resulting stability equations, when reduced to ordinary differential equations by a similarity transformation, constitute a two-point boundary-value problem, which was solved numerically. It is found from the obtained stability results that the neutral stability curves are systematically shifted to have lower critical Grashof numbers, as the inclination angle of upward-facing plate increases. Also, the nose of the neutral stability curve becomes blunter as the angle increases. It implies that the greater the inclination of the upward-facing plate, the more susceptible of the flow to instability for the wide range of disturbance wave number and frequency.

• 설비공학논문집
• /
• 제4권3호
• /
• pp.183-190
• /
• 1992

The Collins cryocooler is numerically analysed with the optimization technique, and the optimum operating and design conditions are searched. This paper shows that liquefied helium quantity has an external maximum w.r.t. the total mass flow rate, the mass flow rates through expander and the capacities of heat exchangers. The liquefied helium quantity increases as the compressor exit pressure of the cryocooler does. The maximum quantity of liquefied helium and the maximum coefficient of performance have been found to exist in extremum, depending on the ratios of each heat exchanger capicities to the total one. At the optimum condition, the capacity of heat exchanger in high temperature region is larger than that in low temperature region.

• Earthquakes and Structures
• /
• 제8권3호
• /
• pp.639-663
• /
• 2015

Time history dynamic structural analysis is a time consuming procedure when used for large-scale structures or iterative analysis in structural optimization. This article proposes a new methodology for approximate prediction of extremum point of the response history via wavelets. The method changes original record into a reduced record, decreasing the computational time of the analysis. This reduced record can be utilized in iterative structural dynamic analysis of optimization and hence significantly reduces the overall computational effort. Design examples are included to demonstrate the capability and efficiency of the Reduced Record Method (RRM) when utilized in optimal design of frame structures using meta-heuristic algorithms.

• 한국멀티미디어학회논문지
• /
• 제22권4호
• /
• pp.432-442
• /
• 2019

Most current human action recognition methods based on deep learning methods. It is required, however, a very high computational cost. In this paper, we propose an action change detection method to reduce repetitive human action recognition tasks. In reality, simple actions are often repeated and it is time consuming process to apply high cost action recognition methods on repeated actions. The proposed method decides whether action has changed. The action recognition is executed only when it has detected action change. The action change detection process is as follows. First, extract the number of non-zero pixel from motion history image and generate one-dimensional time-series data. Second, detecting action change by comparison of difference between current time trend and local extremum of time-series data and threshold. Experiments on the proposed method achieved 89% balanced accuracy on action change data and 61% reduced action recognition repetition.

• Bulletin of the Korean Chemical Society
• /
• 제6권5호
• /
• pp.259-263
• /
• 1985

Rate Constants for the solvolysis of p-methylbenzyl chloride in various ethanol-water mixtures were studied at 30 and $40^{\circ}C$ under various pressures up to 1600 bar. The rates of reaction were increased with increasing temperature and pressure, and decreased with increasing solvent composition of ethanol mole fraction. From the rate constants, the values of the activation parameters (${\Delta}V^{\neq},{\Delta}{\beta}^{\neq},{\Delta}H^{\neq}\;and\;{\Delta}S^{\neq}$) were evaluated. The values of ${\Delta}V^{\neq}\;and\;{\Delta}{\beta}^{\neq}$ exhibit the extremum behavior at about 0.30 mole fraction of ethanol. This behavior is discussed in terms of solvent structure variation (electrostriction). From the relation between the reaction rate and the dielectric constant of solvent or the number of water molecule participated in the transition state, it could be postulated that the reaction proceeds through $S_N1$ mechanism.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.1117-1126
• /
• 1993

Physical parameters in the forward direction of the tractor , which mainly affects the vibration characteristics of the tractor dynamic model, were able to be identified in a short time by using the Gauss-Newton method with extremum searching based on the data obtained from a forced vibration experiment. It was clarified that a period for the updating of the parameter estimates method has effects on the convergence accuracy of identification for the spring constant in the forward direction of the tractor.

• 대한기계학회논문집
• /
• 제11권5호
• /
• pp.731-739
• /
• 1987

본 연구에서는 K.J.Riu의 연구를 확장하여, 상향유동 영역에서 수직면으로부 터 경사각이 60˚이하인 경사등온면이 저온의 물속에 잠겨있을때 일어나는 다중정상상 태 영역을 밝혀내고, 이 영역에서 경사각이 열전달, 온도분포, 속도분포, 부력분포 및 Nusselt수에 미치는 영향을 구명하였다.또한 해석방법은 이제까지 발표된 연구결과 와 비교검토하기 위하여 기존 논문에서와 같이 상사해석을 사용하였다.

• Structural Engineering and Mechanics
• /
• 제58권6호
• /
• pp.967-988
• /
• 2016

Due to the significant aerodynamic interference from sub-towers and surrounding tall buildings, the wind loads and dynamic responses on main tower of three-tower connected tall building typically change especially compared with those on the isolated single tall building. This paper addresses the wind load effects and equivalent static wind loads (ESWLs) of three-tower connected tall building based on measured synchronous surface pressures in a wind tunnel. The variations of the global shape coefficients and extremum wind loads of main tower structure with or without interference effect under different wind directions are studied, pointing out the deficiency of the traditional wind loads based on the load codes for the three-tower connected tall building. The ESWLs calculation method based on elastic restoring forces is proposed, which completely contains the quasi-static item, inertia item and the coupled effect between them. Then the wind-induced displacement and acceleration responses for main tower of three-tower connected tall building in the horizontal and torsional directions are investigated, subsequently the structural basal and floor ESWLs under different return periods, wind directions and damping ratios are studied. Finally, the action mechanism of interference effect on structural wind effects is investigated. Main conclusions can provide a sientific basis for the wind-resistant design of such three-tower connected tall building.

• 로봇학회논문지
• /
• 제6권2호
• /
• pp.97-107
• /
• 2011

This paper describes efficient flight control algorithms for building a reconfigurable ad-hoc wireless sensor networks between nodes on the ground and airborne nodes mounted on autonomous vehicles to increase the operational range of an aerial robot or the communication connectivity. Two autonomous flight control algorithms based on adaptive gradient climbing approach are developed to steer the aerial vehicles to reach optimal locations for the maximum communication throughputs in the airborne sensor networks. The first autonomous vehicle control algorithm is presented for seeking the source of a scalar signal by directly using the extremum-seeking based forward surge control approach with no position information of the aerial vehicle. The second flight control algorithm is developed with the angular rate command by integrating an adaptive gradient climbing technique which uses an on-line gradient estimator to identify the derivative of a performance cost function. They incorporate the network performance into the feedback path to mitigate interference and noise. A communication propagation model is used to predict the link quality of the communication connectivity between distributed nodes. Simulation study is conducted to evaluate the effectiveness of the proposed reconfigurable airborne wireless networking control algorithms.

• 한국광학회지
• /
• 제30권6호
• /
• pp.230-236
• /
• 2019

저렴한 retro-반사지와 미소 전자 기계 시스템(micro electro-mechanical system, MEMS) 거울을 이용한 실내용 무선 광 통신용 위치 탐색 및 자동 링크 정렬 방법을 제안하고 실험하였다. 직접적인 가시선(line of sight, LOS) 확보를 위하여 retro-반사지에서 돌아온 빛으로부터 수신단 위치를 파악하고 MEMS 거울을 통한 빔 조종으로 통신 링크를 자동 정렬하였다. 자동 정렬된 광 링크를 통하여 7 m 전송 거리에서 2.5 Gb/s NRZ 신호를 전송하여 비트 에러율 10^-12에서 수신 감도 -31.87 dBm의 성능을 가졌다.