Aqua regia extraction for the quantification of heavy metals and As in contaminated soils was investigated as one of preliminary steps for on-site monitoring using sensor technology. Soil samples were taken from closed railway depot, closed mines, and closed refinery and various extraction conditions including $30^{\circ}C/15min$, $30^{\circ}C/30min$, $30^{\circ}C/60min$, $30^{\circ}C/120min$, $80^{\circ}C/15min$, $80^{\circ}C/30min$, $80^{\circ}C/60min$, $80^{\circ}C/120min$ were tested. The optimal extraction condition was determined as $80^{\circ}C/60min$ because the extraction efficiencies of Zn were relatively low and did not reach the targeted level (80-100% of original concentrations) for $30^{\circ}C$ conditions. It was found that the fractionation of heavy metals and As using the sequential extraction method was useful to understand the degree of metal extraction. In order to enhance the extraction efficiency within short extraction time, ultrasound technology using a 20 kHz horn-type sonicator was additionally used for $30^{\circ}C/15min$. It was revealed that ultrasound could significantly enhance the extraction efficiency and pulsed irradiation showed higher efficiency than continuous irradiation due to the less formation of bubble clouds. However high temperature condition ($80^{\circ}C$) was required to achieve high extraction efficiency for Zn in spite of the use of ultrasound.
Hu, Zhiheng;Chin, Yaoxian;Liu, Jialin;Zhou, Jiaying;Li, Gaoshang;Hu, Lingping;Hu, Yaqin
Fisheries and Aquatic Sciences
/
v.25
no.2
/
pp.76-89
/
2022
The Lophius litulon liver was used as raw material for the extraction of fish oil via various extraction methods. The extraction rate by water extraction, potassium hydroxide (KOH) hydrolysis and protease hydrolysis were compared and the results revealed the protease hydrolysis extraction had a higher extraction rate with good protein-lipid separation as observed by optical microscope. Furthermore, subsequent experiments determined neutrase to be the best hydrolytic enzyme in terms of extraction rate and cost. The extraction conditions of neutrase hydrolysis were optimized by single-factor experiment and response surface analysis, and the optimal extraction rate was 58.40 ± 0.25% with the following conditions: enzyme concentration 2,000 IU/g, extraction time 1.0 h, liquid-solid ratio 1.95:1, extraction temperature 40.5℃ and pH 6.5. The fatty acids composition in fish oil from optimized extraction condition was composed of 19.75% saturated fatty acids and 80.25% unsaturated fatty acids. The content of docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA) were 8.06% and 1.19%, respectively, with the ratio (6.77:1) surpassed to the recommendation in current researches (5:1). The results in this study suggest protease treatment is an efficient method for high-quality fish oil extraction from Lophius litulon liver with a satisfactory ratio of DHA and EPA.
The separation and sample extraction methods of 19 polycyclic aromatic hydrocarbons (PAHs) in water samples were investigated by gas chromatography/mass spectrometry (GC/MS) and some extraction methods involved liquid-liquid extraction, disk extraction and solid-phase extraction methods. The separation of 19 PAHs was possible by partial variation of oven temperature of GC/MS in temperature range $80{\sim}310^{\circ}C$. Extraction procedures of PAHs in water samples were somewhat modified and compared as extraction recoveries and the simplicity of methods. Extraction recoveries of PAHs were 71.3~109.5% by liquid-liquid extraction method. By using disk extraction, good extraction recoveries (80.7~94.9%) were obtained in case of $C_{18}$ disk extraction method by filtration. And extraction recoveries of PAHs by $C_{18}$ solid-phase were in the range of 51.8~77.9%. Method detection limits (S/N=5) of 19 PAHs were in the range of 0.25~6.25 ppb by liquid-liquid extraction and solid-phase extraction and 0.05~1.25 ppb by disk extraction methods.
Journal of the Korean Society of Food Science and Nutrition
/
v.41
no.7
/
pp.914-920
/
2012
We investigated the effects of heat treatment and extraction method on the antioxidant activities of five medicinal plants: Cyperus rotundus, Eucommia ulmoides, Bupleurum falcatum, Achyranthes japonica Nakai, and Akebia quinata. Extraction was performed with only ultrasound, ultrasound after heating at $130^{\circ}C$ for 2 hours, and reflux extraction with distilled water. The phenolic contents of reflux extraction and ultrasound extraction after heating were higher than only ultrasound extraction, and ultrasound extraction after heating samples was higher than reflux extraction except for Eucommia ulmoides and Cyperus rotundus. Total flavonoid content was higher in reflux and ultrasound extraction after heating samples than only ultrasound extraction, except for Cyperus rotundus. ABTS radical scavenging activity was higher in reflux extraction and ultrasound extraction after heating a sample, than only ultrasound extraction. DPPH radical scavenging activity was higher in reflux extraction except for Achyranthes japonica Nakai and Akebia quinata. The reducing power of ultrasound extraction after heating was higher with Achyranthes japonica Nakai. From the results of this study, we can expect to increase the antioxidant activity of medicinal plant extracts by applying suitable extraction and pretreatment conditions on the type of medicinal plant.
Kim, Myong-Ki;Jeong, Cheol-Seung;Shin, Yong-Kook;Park, Kyong-Hee;Lee, Woon-Jang;Lee, Eun-Jung;Paek, Kee-Yoeup
Horticultural Science & Technology
/
v.28
no.4
/
pp.685-690
/
2010
Rubiadin, a major compound of noni ($Morinda$$citrifolia$) adventitious root, is highly valued in pharmaceutical industry due to hepatoprotective activity. To dissect rubiadin's effective extraction condition, extraction process of noni adventitious roots was performed with different solvent types, ratio of water to methanol (water, 20, 40, 60, 80, and 100% of methanol), extraction time, and extraction method. In contrast, we also developed a reverse- phase HPLC assay method to determine rubiadin from noni adventitious roots. The HPLC assay of rubiadin was performed by C-18 column using a gradient solvent system of methanol and water with UV detector at 280 nm. The extraction efficiency of different types of solvents were increased in order of methanol (0.08%) > ethanol (0.05%) > acetonitrile (0.03%) > acetone (0.02%) and methylene chloride (0.02%). The results of rubiadin extraction using different solvents showed that 1 hour of ultrasonic extraction was effective in order of 60% methanol (0.21%) > 80% methanol (0.13%) > 100% methanol (0.07%), 40% methanol (0.07%) and 2 hours of reflux extraction was effective in order of 60% methanol (0.21%) > 40% methanol (0.17%) > 80% methanol (0.14%). To compare the extraction efficiency of rubiadin according to the extraction methods and time for high rubiadin content, the extracts of rubiadin in noni adventitious roots were isolated with the methods of ultrasonic extraction, shaking extraction and reflux extraction. Rubiadin extracted from the methods of ultrasonic waves and shaking displayed the highest contents at 8 and 24 hours, respectively.
This study was conducted to elucidate extraction efficiency by microwave in comparison with Soxhlet for extraction of pesticide residues in dried medical herbs; red-ginseng, white-ginseng, Bupleuri Radix, Angelica gigas Nakai, Rehmannia glutinosa. The acetone extraction by microwave of tolclofos-methyl and quintozene in medical herbs was efficient. The extraction efficiency by microwave with power 45 to 150 watts, extraction time 1 to 5 minutes and solvent volume 30 ml was compared with that of Soxhlet with extraction time 7 hours and solvent volume 150 ml. The extraction efficiency by microwave with extraction time 3 to 5 minutes was similar with extraction time of 7 hours by Soxhlet. When medical herbs spiked with tolclofos-methyl and quintozene was analyzed to how the extraction efficiency of microwave by kind of medical herbs, the extraction efficiency by microwave with extraction time of 3 to 5 minutes was the same as Soxhlet extraction. The optimal condition for extraction of tolclofos-methyl and quintozene in medical herbs by microwave was 45 to 90 watts of power supply, 3 to 5 minutes of extraction time and acetone 30 ml of solvent volume.
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
v.46
no.1
/
pp.78-83
/
2020
Objectives: The discontinuation of bisphosphonate (BP) treatment before tooth extraction may induce medication-related osteonecrosis of the jaw (MRONJ). Whether the long-term discontinuation of BP treatment before tooth extraction affects the risk of developing MRONJ after tooth extraction or whether extended drug holidays induce systemic side effects remains unclear. The present study assessed the incidence of MRONJ among patients who underwent tooth extraction and did not discontinue BP therapy prior to the procedure. Materials and Methods: Patients were classified according to whether or not they discontinued BP therapy before tooth extraction. Differences in the incidence of MRONJ after tooth extraction were compared between the two groups using the chi-squared test. Results: The BP-continuation (BPC) and BP-discontinuation (BPDC) groups included 179 and 286 patients, respectively. One patient in the BPC group and no patients in the BPDC group developed MRONJ (P=0.385). The patients in the BPDC group stopped receiving BP therapy at a mean of 39.0±35.5 months prior to tooth extraction. Conclusion: The possibility of pre-existing MRONJ in the extraction area must be considered during the extraction procedure. Routine discontinuation of BP medications for several months before the extraction procedure should be carefully considered, as evidence of its efficacy in reducing the development of post-extraction MRONJ is limited.
Kim, Jung-Hoon;Kim, Seong-Sil;Shin, Hyeun-Kyoo;Seo, Chang-Seob
The Journal of Korean Medicine
/
v.34
no.4
/
pp.12-20
/
2013
Objectives: This study compared Gumiganghwal-tang (GGT) decoctions produced using different pressure levels for various extraction times to determine the optimal extraction conditions through hydrogen ion concentration (pH), total soluble solids content (TSSC), extraction yield, and content of chemical compounds. Methods: Decoctions were prepared by the pressure levels of 0 or $1kgf/cm^2$ for 30-180 min. The pH and TSSC were measured, the extraction yield was calculated, and the amounts of the chemical compounds were determined using high performance liquid chromatography. Results: The higher pressure and longer extraction time decreased the pH value, while those conditions increased TSSC and extraction yield: the decoction produced in 180 min by pressurized method showed the minimum value of pH, but maximum values of TSSC and extraction yield. The chemical compounds showed higher amounts in decoctions produced by non-pressurized methods than pressurized methods and their amounts were decreased over the peak extraction time in both pressurized and non-pressurized methods. The results of regression analysis confirmed the correlative influences of the pressure and extraction time on pH, TSSC, and extraction yield. Conclusions: This study suggests that pressure and extraction time influence the compositional constituents in GGT decoctions, and the non-pressurized method for 120 min should be chosen as the optimal extraction condition for the preparation of GGT decoction.
Proceedings of the Korean Society of Soil and Groundwater Environment Conference
/
2000.11a
/
pp.294-297
/
2000
Heavy metals are extracted from Chonju stream sediment, roadside soils and sediments along Honam expressway, soils and tailings from mining area using partial ectraction in Standard Method, partial ectraction method with maintaining 0.1N of extraction solution and acid digestion. In samples having buffer capacity against acid, 0.1N of extraction solution can not be maintained and pH of extraction solution increases up to 8.0 when partial extraction in Standard Method is used. The averages and ranges of (heavy metals extracted using partial extraction in standard method, HPE)/(heavy metals extracted using partial extraction method with maintaining 0.1N of extraction solution, HPEM) values are 0.506 and 0.145~1.126 in Cd, 0.534~ and 0.078~0.928 in Zn, 0.461 and 0.041~1.715 in Mn, 0.359 and 0.011~0.874 in Cu, 0.195 and 0.018~1.785 in Cr, 0.710 and 0.003~3.075 in Pb, and 0.088 and 1.73$\times$10$^{-5}$ ~0.303 in Fe. These data indicate that the difference between HPE and HPEM is big in the order of Fe, Cr, Cu, Mn, Cd, Zn and Pb. It is quite possible that the partial extraction method in Standard Method of soil in Korea is not adequate for an assessment of contamination in area where buffer capacity of soil will be decreased or lost after a long term exposure of soils to environmental damage.
Extraction characteristics of garlic and functional properties of corresponding extract were monitored by response surface methodology (RSM). Maximum extraction yield of 26.41% was obtained at microwave power of 146.29 W, ethanol concentration of 63.31 %, and extraction time of 5.88 min. At microwave power, ethanol concentration, and extraction time of 114.84 W, 58.83%, and 1.42 min, respectively, maximum electron-donating ability (EDA) was 72.86%. Maximum nitrite-scavenging ability was 94.62% at microwave power, ethanol concentration, and extraction time of 81.83 W, 2.65%, and 3.83 min, respectively. Superoxide dismutase (SOD) showed maximum pseudo-activity of 49.12% at microwave power of 34.23 W, ethanol concentration of 33.11 %, and extraction time of 4.40 min. Based on superimposition of 4-dimensional RSM with respect to extraction yield, electron-donating ability, nitrite-scavenging ability, and pseudo-activity of SOD, optimum ranges of extraction conditions were microwave power of 0-100 W, ethanol concentration of 40-70%, and extraction time of 2-8 min.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.