• 제목/요약/키워드: external magnetic field

검색결과 448건 처리시간 0.024초

쥐에서 말초 자극에 따른 뇌피질 활성화의 자기공명 영상 (MR imaging of cortical activation by painful peripheral stimulation in rats)

  • 이배환;차명훈;정재준;이규홍;이철현;손진훈
    • 한국감성과학회:학술대회논문집
    • /
    • 한국감성과학회 2009년도 추계학술대회
    • /
    • pp.183-185
    • /
    • 2009
  • As imaging technology develops, magnetic resonance imaging (MRI) techniques have contributed to the understanding of brain function by providing anatomical structure of the brain and functional imaging related to information processing. Manganese-enhanced MRI (MEMRI) techniques can provide useful information about functions of the nervous system. However, systematic studies regarding information processing of pain have not been conducted. The purpose of this study was to detect brain activation during painful electrical stimulation using MEMRI with high spatial resolution. Male Sprague-Dawley rats (250-300 g) were divided into 3 groups: normal control, sham stimulation, and electric stimulation. Rats were anesthetized with 2.5% isoflurane for surgery. Polyethylene catheter (PE-10) was placed in the external carotid artery to administrate mannitol and MnCl2. The blood brain barrier (BBB) was broken by 20% D-mannitol under anesthesia mixed with urethane and a-chloralose. The hind limb was electrically stimulated with a 2Hz (10V) frequency while MnCl2 was infused. Brain activation induced by electrical stimulation was detected using a 4.7 T MRI. Remarkable signal enhancement was observed in the primary sensory that corresponds to sensory tactile stimulation at the hind limb region. These results suggest that signal enhancement is related to functional activation following electrical stimulation of the peripheral receptive field.

  • PDF

A Light Incident Angle Stimulated Memristor Based on Electrochemical Process on the Surface of Metal Oxide

  • 박진주;용기중
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.174-174
    • /
    • 2014
  • Memristor devices are one of the most promising candidate approaches to next-generation memory technologies. Memristive switching phenomena usually rely on repeated electrical resistive switching between non-volatile resistance states in an active material under the application of an electrical stimulus, such as a voltage or current. Recent reports have explored the use of variety of external operating parameters, such as the modulation of an applied magnetic field, temperature, or illumination conditions to activate changes in the memristive switching behaviors. Among these possible choices of signal controlling factors of memristor, photon is particularly attractive because photonic signals are not only easier to reach directly over long distances than electrical signal, but they also efficiently manage the interactions between logic devices without any signal interference. Furthermore, due to the inherent wave characteristics of photons, the facile manipulation of the light ray enables incident light angle controlled memristive switching. So that, in the tautological sense, device orienting position with regard to a photon source determines the occurrence of memristive switching as well. To demonstrate this position controlled memory device functionality, we have fabricated a metal-semiconductor-metal memristive switching nanodevice using ZnO nanorods. Superhydrophobicity employed in this memristor gives rise to illumination direction selectivity as an extra controlling parameter which is important feature in emerging. When light irradiates from a point source in water to the surface treated device, refraction of light ray takes place at the water/air interface because of the optical density differences in two media (water/air). When incident light travels through a higher refractive index medium (water; n=1.33) to lower one (air; n=1), a total reflection occurs for incidence angles over the critical value. Thus, when we watch the submerged NW arrays at the view angles over the critical angle, a mirror-like surface is observed due to the presence of air pocket layer. From this processes, the reversible switching characteristics were verified by modulating the light incident angle between the resistor and memristor.

  • PDF

청각모델을 이용한 이식형 인공중이 시스템의 신호 전달 특성 해석 (Analysis of Signal Transfer Characteristics of Implantable Middle Ear System using Acoustic Model)

  • 송병섭;조진호
    • 대한의용생체공학회:의공학회지
    • /
    • 제23권3호
    • /
    • pp.227-233
    • /
    • 2002
  • 이식형 인공중이는 음질과 주파수 특성이 우수하며 기존의 공기전도형 보청기가 가지는 고이득에서의 왜곡과 음향 피이드백에 의한 링잉 현상을 해소할 수 있어 차세대 보청기로 주목받고 있다 특히 두 개의 영구자석을 같은 극기리 접착한 후 코일내부에 위치시킨 타동 전자 트랜스듀서 방식의 이식형 인공중이는 외부의 자기장에 대해 영향을 받지 않으며 진동효율이 높고 자석과 코일의 간격조정이 필요 없는 동시에 주파수 응답특성이 우수하다. 본 연구에서는 이식형 인공중이에 사용하위해 개발된 타동 전자 트랜스듀서의 음향 모델을 구현한 후 정상인의 귀의 청각 모델에 적용시켜 트랜스듀서를 통하여 내이로 전달되는 신호의 주파수 특성을 해석하였다. 해석된 결과를 정상인의 귀의 주파수 특성과 비교함으로써 인공중이를 사용할 경우와 정상인의 귀와의 신호전달 특성 차이를 조사하였고 이를 통하여 정상인의 청각특성에 가까운 신호를 전달시킬 수 있는 인공중이의 설계가 가능하도록 하였다.

어트리션 볼 밀링에 의한 보론 분말의 미세화 및 $MgB_2$의 초전도특성 (Refinement of Crystalline Boron and the Superconducting Properties of $MgB_2$ by Attrition Ball Milling)

  • 이지현;신승용;전병혁;김찬중;박해웅
    • Progress in Superconductivity
    • /
    • 제10권1호
    • /
    • pp.23-28
    • /
    • 2008
  • We report refinement of crystalline boron by an attrition ball milling system and the superconducting properties of the $MgB_2$ pellets prepared from the refined boron. In this work, we have conducted the ball milling with only crystalline boron powder, in order to improve homogeneity and control the grain size of the $MgB_2$ that is formed from it. We observed that the crystalline responses in the ball-milled boron became broader and weaker when the ball-milling time was further increased. On the other hand, the $B_{2}O_{3}$ peak became stronger in the powders, resulting in an increase in the amount of MgO within the $MgB_2$ volume. The main reason for this is a greater oxygen uptake. From the perspective of the superconducting properties, however, the sample prepared from boron that was ball milled for 5 hours showed an improvement of critical current density ($J_c$), even with increased MgO phase, under an external magnetic field at 5 and 20 K.

  • PDF

이식형 인공중이 시스템을 위한 고효율 차동 전자 트랜스듀서의 설계 (Design of High Efficiency Differential Electromagnetic Type Transducer for Implantable Middle Ear System)

  • 송병섭;노철균;김명남;조진호
    • 센서학회지
    • /
    • 제11권3호
    • /
    • pp.171-182
    • /
    • 2002
  • 이식형 인공중이에 사용되는 일반적인 전자기 방식의 진동 트랜스듀서에 비하여 두 개의 소형 영구자석을 같은 극끼리 접착한 후 코일내부에 위치시킨 차동 전자 트랜스듀서는 효율이 높고 코일-영구자석간의 공극조정이 필요 없으며 외부의 자기장에 대하여 영향을 받지 않는 특성을 가진다. 본 논문에서는 이러한 차동 전자 트랜스듀서를 이식형 인공중이 시스템에 사용하기 위하여 입력전류에 대하여 진동력의 크기를 최대화시킬 수 있는 효율적인 구조를 제안, 해석하였다. 유한요소 해석을 통하여 가장 효율적인 코일과 자석의 길이 비를 도출하였고 소리신호 전달을 위한 트랜스듀서의 필요 진동력을 산출한 후 트랜스듀서 발생 진동력을 해석하였다. 그리고 실제 이소골에 이식할 수 있는 크기의 트랜스듀서를 제작하기 위한 설계상수를 추출하였다. 계산된 설계상수를 이용하여 이식 가능한 크기로 트랜스듀서를 구현한 후 무부하 실험과 사체 부하 실험을 실시하여 제작된 트랜스듀서가 실제 중등이상 고도난청자를 위한 이식형 인공중이 시스템에 사용될 수 있음을 증명하였다.

YBCO 2G 선재간 접합 특성 연구 (Charateristics analysis of the joining of YBCO 2G HTS wire)

  • 장기성;박동근;양성은;안민철;조대호;김현규;;고태국
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
    • /
    • pp.741-742
    • /
    • 2006
  • This paper deals with an efficient superconducting joint method between 2G high superconducting(HTS) wire, YBCO coated conductor(CC). Recently CC is one of the most promising superconducting wire due to high n-value and critical current independency from external magnetic field. It is expected to be used many superconducting application such as fault current limiter, persistent current system and cable etc. In most HTS applications, superconducting magnet is used, and it is necessary to joint between superconducting wire to fabricate superconducting magnet system. A CC tape used in this research consists of copper stabilizer, silver layer, YBCO layer, buffer and substrate. Direct joint using soldering method was inefficient due to resistance of copper, then copper lamination is removed by chemical etching method to reduce resistance between CC tapes. Jointed tapes were fabricated and tested. Transport current through jointed area and induced voltage were measured to characterize the I-V curve. Resistance between CC wire using chemical etching was compared with resistance of direct jointed tapes using soldering method in this paper.

  • PDF

Preisach 모델을 이용한 강자성체의 탈자기법 연구 (A Study on the Deperm of Ferromagnetic Material using Preisach Model)

  • 주혜선;박관수;원혁
    • 한국자기학회지
    • /
    • 제23권2호
    • /
    • pp.54-61
    • /
    • 2013
  • 강자성체는 자구들의 상호작용으로 인해 잔류 자화가 남게 되는데, 전자전기 산업 및 국방 피탐지 분야에서는 이러한 잔류 자화량을 정밀하게 0으로 만드는 탈자기법이 요구된다. 하지만 현재 수행되는 탈자기법들은 경험과 실험에 의존한 방법들로, 새로운 재료의 개발에 따른 효율적인 탈자를 위해서는 강자성체의 히스테리시스 곡선을 반영한 탈자기법이 필요하다. 본 논문에서는 자성체의 물성적인 성질을 기반으로 정립된 Preisach 모델링 기법을 이용하여 Anhysteretic Deperm, Deperm-ME, Flash-Deperm에 따른 2차원 유한요소해석을 수행하였다. 탈자 전류에 의한 자기이력궤적의 분석을 통해 강자성체의 히스테리시스 곡선과 탈자 변수의 관계를 고찰하였으며, 이로써 탈자에 효율적인 전류 감소 형태를 제시하였다.

구조물 스마트제어를 위한 ETMD(Electromagnetic Tuned Mass Damper)개발 (Development of ETMD(Electromagnetic Tuned Mass Damper) for Smart Control of Structure)

  • 전승곤;허광희;이진옥;이재훈;김대혁
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제26권3호
    • /
    • pp.21-28
    • /
    • 2022
  • TMD는 다른 진동제어장치에 비해 구조가 단순하며, 구조물에 발생하는 정형화된 형태의 진동에 우수한 제어성능을 보인다. 그러나 다른 제어장치에 비하여 진동제어범위가 좁아 예상치 못한 외부하중으로 인하여 발생하는 진동주기에는 취약하다. 본 연구에서 개발된 ETMD는 Mass를 전자석으로 구성하여 전류를 공급할 때 자기장이 형성됨과 동시에 마찰판과의 마찰력을 상승시켜 Mass의 거동을 순간적으로 제어한다. 개발된 ETMD의 제어성능 평가를 위하여 모형 단순보 교량 중앙에 ETMD를 설치한 후 중앙부 최대 수직변위가 발생하는 3.02Hz 조건으로 강제 진동을 발생시켜 휨거동 제어실험을 수행하였다. 실험결과 ETMD는 중앙부 최대 수직변위가 발생하는 3.02Hz에서 변위 감쇠율이 57.51%로 우수한 제어성능을 발휘하며 그 외에 진동주기에도 안정적인 제어성능을 보이는 것을 확인하였다.

반자성으로 커플링된 NiFe/Ru/NiFe 박막에서의 자기이방성의 변화 (Magnetic Anisotropy Behavior in Antiparallely Coupled NiFe/Ru/NiFe Films)

  • 송오성;정영순;이기영
    • 한국자기학회지
    • /
    • 제13권3호
    • /
    • pp.97-102
    • /
    • 2003
  • 고집적 TMR소자의 프리층에 적용될 수 있는 인위적페리층(synthetic ferrimagnetic layer : SyFL)인 NiFe/Ru/NiFe박막을 만들고, 결정에너지, 지만에너지, 교환에너지를 고려한 총에너지로부터 평형상태에서의 관계식에서 Ru두께에 따른 보자력( $H_{c}$)변화와, 스핀플로핑자계( $H_{sf}$ ), 포화자계( $H_{s}$)에 대해 알아보았다. Ta(50$\AA$)/NiFe(50$\AA$)Ru(4~20$\AA$)/NiFe(30$\AA$)/Ta(50$\AA$) 구조를 ICP (inductively coupled plasma)형 헬리콘스퍼터로 제작하고, 주어진 Ru두께에서의 시편을 SQUID로 $\pm$15kOe까지 분석하여 M-H루프를 측정하였다. 에너지를 고려한 평형상태 예측은 실험과 잘 일치하였으며, 이방성에너지 $K_{u}$= 1000erg/㎤, 교환에너지 $J_{ex}$= 0.7erg/$\textrm{cm}^2$까지 조절이 가능하였다. 상온에서 $H_{c}$를 10 Oe이하로 만드는 것이 가능하였고, 공업적으로 의미있는 $H_{s}$, $H_{sf}$ 의 범위를 Ru두께 4~10 $\AA$에서 선택이 가능하였다. 또한 50 $\AA$이하의 얇은 NiFe박막에서 자기탄성계수는 0이 아닌 (+)로 작용할 수 있다는 점과 NiFe/Ru 계면 조도를 간접적으로 예상하는 것이 가능하였다.

Cu/Ni80Fe20 코어/쉘 복합 와이어에서 대각(Diagnonal) 자기임피던스 (Diagonal Magneto-impedance in Cu/Ni80Fe20 Core-Shell Composite Wire)

  • 조성언;구태준;김동영;윤석수;이상훈
    • 한국자기학회지
    • /
    • 제25권4호
    • /
    • pp.129-137
    • /
    • 2015
  • Cu(반경 $r_a$ = $95{\mu}m$)/$Ni_{80}Fe_{20}$(외경 $r_b$ = $120{\mu}m$)의 코어/쉘 복합 와이어를 전기도금방법으로 제작하였다. 제작 된 복합 와이어에 대해 원통 좌표계에서 임피던스 텐서의 두 대각 성분 $Z_{{\theta}{\theta}}$$Z_{zz}$를 10 kHz~10 MHz 범위의 주파수(f)와 0 Oe~200 Oe 범위의 외부 정지 자기장의 함수로 측정하였다. Maxwell 방정식으로부터 코어/쉘 복합 와이어의 두 대각 임피던스 $Z_{{\theta}{\theta}}$$Z_{zz}$를 각각 복소 투자율 텐서의 두 대각 성분 ${\mu}^*_{zz}$${\mu}^*_{{\theta}{\theta}}$로 표현하는 식을 유도하였다. 유도된 식을 이용하여 측정된 $Z_{{\theta}{\theta}}$(f)와 $Z_{zz}$(f) 스펙트럼으로부터 ${\mu}^*_{zz}$(f)와 ${\mu}^*_{{\theta}{\theta}}$(f) 스펙트럼을 각각 뽑아낼 수 있었다. 뽑아낸 두 대각 투자율 스펙트럼을 자벽이동과 자화회전의 완화과정으로 해석하면 Cu/NiFe 코어/쉘 복합 와이어의 동적 자화과정을 규명하는 유용한 도구가 될 수 있다는 것을 제시하였다.