• 한국강구조학회 논문집
• /
• 제25권5호
• /
• pp.451-461
• /
• 2013

강교량에는 외력에 대해 저항하는 부재의 좌굴 등의 변형을 구속시키기 위한 여러 상세부들이 존재한다. 이들 상세부는 상호 교차하는 부재들로 구성되고 제작의 용이성, 용접결함의 원천적 배제 및 응력집중을 완화시키기 위해 스켈럽을 이용해 왔다. 본 연구에서는 교차부에 발생되는 응력집중으로 상세범주 D등급 이하를 갖게 되는 강교량 상세부의 피로저항 능력을 상세범주 C등급 이상으로 개선시키는 방안으로 응력완화홀(SRH)을 제안하였다. 적절한 크기 및 위치의 SRH 효과를 확인하고 이를 강바닥판교의 U-rib와 가로보 교차부에 작용시켜 SRH에 의한 피로저항능력 개선 가능성을 확인하였다.

• Tribology and Lubricants
• /
• 제32권1호
• /
• pp.1-8
• /
• 2016

This paper focuses on the thermal deformation induced preload change in the tilting pad journal bearing, using a three-dimensional (3D) thermo-hydro-dynamic (THD) approach. Preload is considered as a critical factor in designing the tilting pad journal bearing. The initial preload measured under nil external load and nil thermal gradient is influenced by two factors, namely, the thermal deformation and elastic deformation. Thermal deformation is due to a temperature distribution in the bearing pads, whereas the elastic deformation is due to fluid forces acting on the pads. This study focuses on the changes induced in preload and film clearance due to thermal deformation. The generalized Reynolds equation is used to evaluate the force of the fluid and the 3D energy equation is used to calculate the temperature of the lubricant. The abovementioned equations are combined by establishing a relationship between viscosity and temperature. The heat transfer within the bearing pads, the lubricant, and the spinning journal is calculated using the heat flux boundary condition. The 3D Finite Element Method (FEM) is used in modeling the (1) heat conduction in the spinning journal and bearing pads, (2) thermal gradient induced thermal distortion of the spinning journal and pads, and (3) viscous shearing, and heat conduction and convection in a thin film. This evaluation method has an increased fidelity, and it can prove to be a cost-effective tool that can be used by designers to predict the dynamic behavior of a bearing.

• 한국항공우주학회지
• /
• 제35권12호
• /
• pp.1089-1094
• /
• 2007

연구에서는 코일 스프링 및 작동유체가 없는 새로운 감쇠기의 개념을 소개한다. 이 감쇠기는 영구자석과 전도체 실린더로 구성된다. 극성이 반대인 자석은 반발력을 발생시키고, 이는 코일 스프링과 같은 역할을 한다. 영구자석과 전도체 실린더 사이의 상대운동은 기전력을 발생시키는 와전류를 생성하고, 이로 인해 감쇠 유체를 대신할 수 있는 감쇠력을 만든다. 이러한 감쇠를 와전류 감쇠기라고 한다. 본 연구에서 제안된 와전류 감쇠기의 중요한 장점은 감쇠 유체 및 어떠한 외부의 전력도 필요로 하지 않고, 비접촉식이며, 온도에도 민감하지 않다. 본 연구에서는 제안된 와전류 감쇠기를 제작하고 실험을 통하여 감쇠기의 동적 특성을 조사하였다. 본 연구의 결과는 제안된 와전류 감쇠기가 우수한 감쇠 성능을 가짐을 보였다.

• 한국실내디자인학회논문집
• /
• 제14권5호
• /
• pp.98-105
• /
• 2005

Through advanced computer technology, our physical environment became a flexible and liquid space that is a multi-functional space structure, hetero-alliance, formless, interactivity. We attempt to interpretate Deleuze's Other geometry as a space designer. Hence first, the aim of this study is to define the meaning of the Other and Other geometry. Second, to extract keywords out of the Other geometry to analyze the work. Third, to analyze the work using the space formative languages(blob, blurring, distortion, folding, layering, lightness, nesting, repetition, shear, transparency, twisting, unfolding, warping, waving, and weaving). The 13 works were selected which have been issued after year 2000 with the focus on liquid space studies. The methods of this study are literature research and contents analysis. The results of the analysis were as follows. First, the source is the Other who is a hidden potentials in the surrounding environment, and this source has the capability of making it part of reality anytime. Other geometry means it is a theory that is comprised of various lines that with the kind of experiences that one has in life. Second, the key words that were extracted from the theory of Deleuze's Other geometry were of (1)hetero-alliance(reflected in a sculptured shape or a fluid abstract form), (2)dis-form(by speculating the user's movements, and combining space elements with external forces), (3)interactivity (information was exchanged real time between the user and his environment where the space took on a sensory institution). Finally, after studying the works using the space formative languages, we found that blob, warping, waving were used externally, and repetition, warping and waving for mostly used internally.

• 해양환경안전학회지
• /
• 제14권4호
• /
• pp.303-307
• /
• 2008

피예선인 부선으로 인하여 예선 자체의 조종성능에 제한을 받고, 이러한 예부선은 바람, 파도, 조류 등과 같은 외력의 영향이 크게 작용하여 예부선 운항의 안정성 확보에 많은 어려움이 수반되고 있다. 예선의 선장, VTS 및 육상의 운항부서 등에서는 부선과 같은 피예선의 실해역에서의 침로, 속도, 위치 등을 실시간으로 추적하여 해난사고를 사전에 예방할 수 있는 시스템의 구축이 절실히 필요한 실정 이다. 본 연구에서는 비교적 저렴하고 이동이 용이한 휴대용 GPS를 이용한 부선의 안전예항시스템의 구축에 대한 기초적인 방법을 제안하고, 이를 토대로 실선에서의 테스트를 실시하고 그 결과에 대하여 논의한다. 본 연구를 통하여 안전 예항에 필요한 여러 항해 정보를 취득할 수 있었으며, 이러한 정보는 다양한 분야에서의 활용이 가능할 것으로 사료된다.

• Journal of Astronomy and Space Sciences
• /
• 제15권1호
• /
• pp.209-220
• /
• 1998

The stability problem of steady motion of a rigid body with multi-elastic appendages and multi-liquid-filled cavities, in the presence of no external forces or torque, is considered in this paper. The flexible appendages are modeled as the clamped -free-free-free rectangular plates, or/and as the discrete mass- spring sub-system. The motion of liquid in every single ellipsoidal cavity is modeled as the uniform vortex motion with a finite number of degrees of freedom. Assuming that stationary holonomic constraints imposed on the body allow its rotation about a spatially fixed axis, the equation of motion for such a systematic configuration can be very complex. It consists of a set of ordinary differential equations for the motion of the rigid body, the uniform rotation of the contained liquids, the motion of discrete elastic parts, and a set of partial differential equations for the elastic appendages supplemented by appropriate initial and boundary conditions. In addition, for such a hybrid system, under suitable assumptions, their equations of motion have four types of first integrals, i.e., energy and area, Helmholtz' constancy of liquid - vortexes, and the constant of the Poisson equation of motion. Chetaev's effective method for constructing Liapunov functions in the form of a set of first integrals of the equations of the perturbed motion is employed to investigate the sufficient stability conditions of steady motions of the complete system in the sense of Liapunov, i.e., with respect to the variables determining the motion of the solid body and to some quantities which define integrally the motion of flexible appendages. These sufficient conditions take into account the vortexes of the contained liquids, the vibration of the flexible components, and coupling among the liquid-elasticity solid.

• Structural Engineering and Mechanics
• /
• 제62권6호
• /
• pp.749-758
• /
• 2017

In structural mechanics, traditional analyses methods usually employ matrix operations for obtaining displacement and internal forces of the structure under the external effects, such as distributed loads, earthquake or wind excitations, and temperature changing inter alia. These matrices are derived from the well-known principle of mechanics called minimum potential energy. According to this principle, a system can be in the equilibrium state only in case when the total potential energy of system is minimum. A close examination of the expression of the well-known equilibrium condition for linear problems, $P=K{\Delta}$, where P is the load vector, K is the stiffness matrix and ${\Delta}$ is the displacement vector, it is seen that, basically this principle searches the displacement set (or deformed shape) for a system that minimizes the total potential energy of it. Instead of using mathematical operations used in the conventional methods, with a different formulation, meta-heuristic algorithms can also be used for solving this minimization problem by defining total potential energy as objective function and displacements as design variables. Based on this idea the technique called Total Potential Optimization using Meta-heuristic Algorithms (TPO/MA) is proposed. The method has been successfully applied for linear and non-linear analyses of trusses and truss-like structures, and the results have shown that the approach is much more successful than conventional methods, especially for analyses of non-linear systems. In this study, the application of TPO/MA, with Harmony Search as the selected meta-heuristic algorithm, to cables net system is presented. The results have shown that the method is robust, powerful and accurate.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권5호
• /
• pp.701-707
• /
• 2012

Immune stress is the loss of immune homeostasis caused by external forces. The purpose of this experiment was to investigate the effects of immune stress on the growth performance, small intestinal enzymes and peristalsis rate, and mRNA expression of nutrient transporters in broiler chickens. Four hundred and thirty-two 1-d-old broilers (Cobb500) were randomly assigned to four groups for treatment; each group included nine cages with 12 birds per cage. Group 1 = no vaccine (NV); Group 2 = conventional vaccine (CV); group 3 = lipopolysaccharide (LPS)+conventional vaccine (LPS); group 4 = cyclophosphamide (CYP)+conventional vaccine (CYP). The results demonstrated that immune stress by LPS and CYP reduced body weight gain (BWG), feed intake (FI), small intestine peristalsis rate and sIgA content in small intestinal digesta (p<0.05). However, the feed conversion ratio (FCR) remained unchanged during the feeding period. LPS and CYP increased intestinal enzyme activity, relative expression of SGLT-1, CaBP-D28k and L-FABP mRNAs (p<0.05). LPS and CYP injection had a negative effect on the growth performance of healthy broiler chickens. The present study demonstrated that NV and CV could improve growth performance while enzyme activity in small intestine and relative expression of nutrient transporter mRNA of NV and CV were decreased in the conditions of a controlled rational feeding environment. It is generally recommended that broilers only need to be vaccinated for the diseases to which they might be exposed.

• 한국음향학회지
• /
• 제19권7호
• /
• pp.59-65
• /
• 2000

본 논문은 음성진단이나 치료를 위한 기초연구로서, 인체의 진동신호를 측정하여 그 특성을 분석한 것이다. 가진신호는 외부적인 힘이 아닌 자신의 음성이며, 진동과 공진 특성이 강한 모음 '아', '에', '이', '오', '우'를 적용하여 실험하였다. 실험장치로는 마이크로폰과 가속도계 그리고 증폭기를 이용하였으며 컴퓨터에 측정 데이터를 저장하였다. 마이크로폰으로 음성신호를 저장하면서 동시에 가속도계를 이용하여 인체 각 부위에서의 진동신호를 측정하였으며 측정 위치는 머리, 목, 몸체를 일정한 간격으로 나누어 총 63개의 위치로 정하였다. 진동 신호의 측정 위치와 횟수는 사용 목적에 따라 충분히 가변적일 수 있다. 진동 분석을 위한 파라미터는 진동 신호의 크기, 위상, 기본 진동수, 결집음폭대이며, 코히어런스 함수를 이용하여 인체의 진동신호와 음성과의 상관성을 알아보았다. 실험결과, 인체의 위치에 따라 독특한 특징들이 있음을 확인하였으며, 그 결과를 제시하였다.

• 한국대기환경학회지
• /
• 제16권3호
• /
• pp.211-223
• /
• 2000

The atmospheric dispersion of a pollutant emitted from a hypothetical source located in the middle of the Yochon Industrial Estate was simulated by using the Regional Atmospheric Modeling System (RAMS). Four horizontally nested grids were employed: the coarsest one covered the southern part of the Korean Peninsula including Mt. Chiri and the finest one covered the Yochon Industrial Estate and the surrounding area. Wind fields were initially assumed horizontally homogeneous with a wind speed of 4m/s, the average for the Yosu area, and were developed without both external forces and diurnal changes in order to investigate the terrain-induced phenomena. Wind directions that could emphasize the terrain effects on the pollutant transport and that could carry pollutants to a highly-popluated area were selected for the dispersion study. A pollutant was released for 24hours from a grid-base volume source after a 24-h blank run for developing the wind field. The dispersion study showed that the pollutant from the present source location did not directly affect the Yosu City, but showed high concentrations at locations behind the hills 5 to 6 km away from the source according to wind directions. When the wind speed was low, close to calm condition, the pollutant was detected at upstream locations 6 to 7 km from the source. In comparison with the results from the RAMS simulation, the Industrial Source Complex Short-Term Model(ISCST3) predicted a narrow dispersion that was sensitive to the wind direction. When the wind velocity was affected by the local environment, the ISCST3 calculation using that data also gave a lop-sided result, which was different from the distribution of the pollutant reproduced by RAMS.