• Archives of Plastic Surgery
• /
• 제50권4호
• /
• pp.348-353
• /
• 2023

Doppler ultrasound can be used to detect almost all arteries of the face before injecting the hyaluronic acid (HA) filler. The relatively more dangerous sites of filler injection are the glabellar wrinkle, forehead, temple, nose, and nasolabial fold area, and it is recommended to map the vasculature of these areas by Doppler ultrasound before performing filler injection. The Doppler ultrasound detection method is included as a video. Internal carotid arterial branches, the supratrochlear, supraorbital, and dorsal nasal arteries, and external carotid arterial branches, the superficial temporal and facial arteries, are very important arteries when injecting HA filler; thus, Doppler ultrasound detection is recommended.

• 공업화학
• /
• 제17권3호
• /
• pp.235-242
• /
• 2006

Liquid phase alkylation of biphenyl (BP) was studied over large pore zeolites. Selective formation of the least bulky products, 4,4'-diisopropylbiphenyl (4,4'-DIPB) occurred only in the isopropylation of BP over some large pore molecular sieves. H-mordenites (MOR) gave the highest selectivity among them. The dealumination of MOR enhanced catalytic activity and the selectivity of 4,4'-DIPB because of the decrease of coke-deposition. Non-selective catalysis occurs on external acid sites over MOR with the low $SiO_2/Al_2O_3$ ratio because severe coke-deposition deactivates the acid sites inside the pores by blocking pore openings. The selectivity of DIPB isomers was changed with reaction temperature. Selective formation of 4,4'-DIPB was observed at moderate temperatures such as $250^{\circ}C$, whereas the decrease of the selectivity of 4,4'-DIPB occurred at higher temperatures as $300^{\circ}C$. However, 4,4'-DIPB was almost exclusive isomer in the encapsulated DIPB isomers inside the pores even at high temperatures. These decreases of the selectivity of 4,4'-DIPB are due to the isomerization of 4,4'-DIPB on the external acid sites. Some 12-membered molecular sieves, such as SSZ-24, MAPO-5 (M:Mg, Zn, Si), SSZ-31, and ZSM-12, which have straight channels, gave 4,4'-DIPB with moderate to high selectivity; however; SSZ-55, SSZ-42, and MAPO-36 (M: Mg, Zn) gave lower selectivity because of cages in 12-membered one dimensional channels. Three dimensional H-Y and Beta zeolites also yield 4,4'-DIPB in low yield because of their wide circumstances for the isopropylation of BP. The increasing the size of alkylating agent enhanced the shape-selective alkylaiton even for the zeolites, such as UTD-1. The ethylation of BP to ethylbiphenyls (EBPs) and diethylbiphenyls (DEBPs) over MOR was non-selective. The ethylation of BP to EBPs was controlled kinetically. However, there was difference in reactivity of EBPs and DEBPs for their further ethylation. 4-EBP was ethylated preferentially among the isomers, although the formation of 4,4'-DEBP was less selective. The least bulky 4-EBP and 4,4'-DEBP have the highest reactivity among EBPs and DEBPs for the ethylation to polyethylbiphenyls (PEBPs). These results show that the environments of MOR pores are too loose for shape selective formation of the least bulky isomers, 4-EBP and 4,4'-DEBP in the ethylation of BP, and that MOR pores have enough space for the further ethylation of 4,4'-DEBP.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.196-208
• /
• 2018

The effect of channel-system of zeolite on methanol-to-DME reaction was studied. Results revealed that channels size and topology affect catalyst lifetime, type and location of coke precursors. FER and MFI showed the best resistance towards coke deposition, whilst fast deactivation was observed on MOR. Although the higher concentration and strength of acid sites, FER structure formed a lower coke amount, preferably located within the pores, while coke cluster deposited on the external surface of MOR. Analysis of acid sites distribution and strength was performed during deactivation-regeneration process. Coke location assessment was also supported by molecular simulations.

• Journal of Microbiology
• /
• 제45권4호
• /
• pp.318-325
• /
• 2007

Glucose 6-phosphate dehydrogenase (G6PDH, EC 1.1.1.49) in Deinococcus radiophilus, an extraordinarily UV-resistant bacterium, was investigated to gain insight into its resistance as it was shown to be involved in a scavenging system of superoxide $(O_2^{-1})$ and peroxide $(O_2^{-2})$ generated by UV and oxidative stresses. D. radiophilus possesses two G6PDH isoforms: G6PDH-1 and G6PDH-2, both showing dual coenzyme specificity for NAD and NADP. Both enzymes were detected throughout the growth phase; however, the substantial increase in G6PDH-1 observed at stationary phase or as the results of external oxidative stress indicates that this enzyme is inducible under stressful environmental conditions. The G6PDH-1 and G6PDH-2 were purified 122- and 44-fold (using NADP as cofactor), respectively. The purified G6PDH-1 and G6PDH-2 had the specific activity of 2,890 and 1,033 U/mg protein (using NADP as cofactor) and 3,078 and 1,076 U/mg protein (using NAD as cofactor), respectively. The isoforms also evidenced distinct structures; G6PDH-1 was a tetramer of 35 kDa subunits, whereas G6PDH-2 was a dimer of 60kDa subunits. The pIs of G6PDH-1 and G6PDH-2 were 6.4 and 5.7, respectively. Both G6PDH-1 and G6PDH-2 were inhibited by both ATP and oleic acid, but G6PDH-1 was found to be more susceptible to oleic acid than G6PDH-2. The profound inhibition of both enzymes by ${\beta}-naphthoquinone-4-sulfonic$ acid suggests the involvement of lysine at their active sites. $Cu^{2+}$ was a potent inhibitor to G6PDH-2, but a lesser degree to G6PDH-1. Both G6PDH-1 and G6PDH-2 showed an optimum activity at pH 8.0 and $30^{\circ}C$.

• Korean Chemical Engineering Research
• /
• 제48권6호
• /
• pp.684-689
• /
• 2010

본 연구에서는 다양한 구조 유도제로 합성된 SAPO촉매를 이용하여 자일로오스의 탈수화 반응을 진행하였다. 구조 유도제로는 테트라에틸암모늄수산화물(TEAOH), 디프로필아민(DPA), 디에틸아민(DEA), 몰포린(Morpholine) 그리고 디에탄올아민(DEtA)을 사용하였다. 촉매의 특성을 파악하기 위하여 질소 흡착-탈착 등온선, 암모니아 승온탈착($NH_3$-TPD), 그리고 승온산화분석(TPO)을 이용하였다. 구조 유도제로 몰포린(Morpholine)을 사용하여 제조한 SAPO-34를 촉매로 사용하였을 경우 사용한 촉매중에서 푸르푸랄 수율이 가장 높았다. 고체산 촉매의 외부 표면적과 산농도가 자일로오스의 탈수화 반응에 영향을 주는 것으로 나타났다.

• 한국임상수의학회지
• /
• 제39권3호
• /
• pp.131-137
• /
• 2022

Osteomyelitis typically occurs because of the direct inoculation of bacteria or fungi after penetrating trauma or surgical contamination or, by extension, from soft tissue infection. Osteomyelitis is rarely reported in wildlife animals, though severe chronic osteomyelitis cases do exist in wildlife owing to the scarcity of medical support in the wild environment. This report describes three cases of chronic osteomyelitis in wild raccoon dogs related to trauma. The typical symptoms of three reported cases were ataxia, stiffness, muscle atrophy, and lethargy. All three cases were relevant to traumatic or severe external injury, and skin infestation caused by ectoparasites was apparent on an ocular inspection. In the radiographic examination, diffuse sites of osteolytic lesions and remarkable periosteal responses were demonstrated around the injured limb in all three cases. Apparent neutrophilia with a left shift, lymphocytosis, and monocytosis in hematological examinations generally indicated chronic infection as shown in case 1 and 3. Treatment was attempted with broad-spectrum antibiotics and non-steroidal anti-inflammatory drugs, such as amoxicillin/clavulanic acid, enrofloxacin, clindamycin, and meloxicam. These treatment options helped improve the overall prognosis of chronic osteomyelitis, but the outcomes did not meet the treatment goal entirely. Osteomyelitis can be extremely challenging to treat, particularly in wild animals, because of their distinctive traits, such as masking phenomenon and uncontrolled exposure to ectoparasites. Earlier diagnosis with a radiographic examination, hematological examinations, and careful patient monitoring, followed by prolonged antibiotic therapy and restricted exercise, are the key factors leading to a better prognosis.

• 청정기술
• /
• 제30권1호
• /
• pp.47-54
• /
• 2024

비식용 작물인 네팔산 Jatropha 씨앗으로부터 추출한 식물성 오일을 원료로 사용하고, 에스테르화 반응과 전이에스테르화 반응으로 구성된 2-step 공정을 거쳐서 바이오디젤로 전환하였다. Jatropha 오일에 함유되어 있는 유리지방산과 메탄올과의 에스테르화 반응에 Amberlyst-15 촉매를 적용하였으며, 자트로파 오일의 산가를 11.0으로부터 0.26 mgKOH/g까지 낮추었다. 산가가 0.26 mgKOH/g인 Jatropha 오일과 메탄올을 원료로 사용하고 NaOH/γ-Al₂O₃ 촉매를 사용하여 전이에스테르화 반응을 통해서 바이오디젤을 제조하였다. NaOH 담지량이 3 wt%에서 25 wt%로 증가함에 따라 비표면적은 129 m²/g에서 28 m²/g으로, 기공 부피는 0.249 m³/g에서 0.129 cm³/g으로 감소하였다. 또한, NaOH의 담지량이 증가할수록 NaOH/γ-Al₂O₃ 촉매의 염기점의 양과 세기가 동시에 증가하였다. NaOH/γ-Al₂O₃ 촉매의 최적 NaOH 담지량은 12 wt%인 것을 확인하였다. NaOH/γ-Al₂O₃ 촉매를 이용한 Jatropha oil의 전이에스테르화 반응에서 최적 온도를 65 ℃로 선정하였다. 교반속도가 150 RPM 이하의 조건에서는 전이에스테르화 반응 속도가 외부 물질 전달의 영향을 받았으나, 그 이상의 교반속도에서는 외부 물질 전달의 영향이 크지 않았다.