• Journal of the Korea Safety Management & Science
• /
• v.12 no.1
• /
• pp.1-9
• /
• 2010

Recently, in circumstantial situation it is recommended positively to utilize of EIFS(Exterior Insulating and Finishing System) as energy policy for economizing energy. But internal EPS insulators of EIFS are exterior panel of high fire risk, because of constituting of flammable materials to be fragile in fire. In this study, fire risk is assessed by experiment Con Calorimeter test and SBI(Single Burning Item) test. As the result of experiment, Con Calorimeter tests do not reach to capability standard of internal incombustible grade, and are assessed as low grade in SBI incombustible grade. Because EIPS is exterior material in buildings with high fire risk in spite of good efficiency, it is required rapidly to take measures to meet situation through various studies(for instance, adjusting law regulation, etc.) in the future.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.61-62
• /
• 2021

Exterior wall molding, which is widely applied as a design element of the exterior wall of domestic apartment, should be applied as a nonflammable or semi-nonflammable material grade according to the rules on standards for evacuation/fire protection structures of buildings. For this reason, stone and AL sheet are mainly used, but stone is expensive and design autonomy is low. Inorganic reinforced CLC nonflammable molding was applied to the exterior wall of the building through tests of nonflammable performance, noise reduction, and installation stability.

• The Research Journal of the Costume Culture
• /
• v.17 no.5
• /
• pp.769-779
• /
• 2009

The purpose of this study is proposing a knitting method that is suitable for the bodies of women in their 20's and can enhance aesthetic aspect and wearing satisfaction. For this study, four kinds of seamless knit one-pieces were implemented by different knitting method of waist dart each other. The inspection of the exterior and the sensory test of movement adaptability were included in this study. The results of this study were listed below. Exterior evaluation of the four samples results that the sample with outside narrowing and widening get low grade. Thus, we can see that the method having only outside narrowing and widening for waist shaping can cause problems. In addition to that, the sample with inside narrowing and widening get highest grade for almost all test items. The dressing evaluation results that the knitting method of waist dart affect only on the exterior but not on the movement adaptability of the seamless knit one-piece.

• Corrosion Science and Technology
• /
• v.7 no.6
• /
• pp.324-327
• /
• 2008

Stainless steels have been widely used as a building exterior materials in Asian countries for the last decade. It is required for the materials in this field to have an aesthetic appearance, a relatively high strength, and an excellent corrosion resistance. Other metallic materials such as copper, aluminum, and carbon steels have been also used as the exterior materials. Considering the cost of maintenance, stainless steel, having the outstanding corrosion resistance, is replacing other materials in the several parts in the building exteriors. Ferritic stainless steel has been applied as the roofing materials because its thermal expansion is much smaller than that of austenitic stainless steel. Therefore, it is suitable for the large-scale construction such as airport terminal, convention center, and football stadium. To improve the corrosion resistance of the ferritic stainless steels, the modification of alloy composition has been studied to develop new grade materials and the progress in the surface technology has been introduced. Corrosion properties of these materials were evaluated in the laboratory and in the field for longer than two years. High-Cr ferritic stainless steel showed excellent corrosion resistance to the atmospheric environments. In the region close to the sea, the corrosion resistance of high-Cr ferritic stainless steel was much superior to that of other materials, which may prove this steel to be the appropriate materials for the construction around seashore. In some of the large constructions around seashore in South Korea, high-Cr ferritic stainless steels have been used as the building exterior materials for six years.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.4
• /
• pp.409-418
• /
• 2017

This work attempted to manufacture glued-laminated timber (Glulam) bonded with melamine-urea-formaldehyde (MUF) resin adhesives at various melamine contents from 20% to 50% under high frequency (HF) heating for a very short time. Two preparation methods were employed to prepare MUF resin adhesives with different melamine contents: one-batch method of synthesizing MUF resins in a single batch, and two-batch method of mixing urea-formaldehyde (UF) resin with melamine-formaldehyde (MF) resin that had been synthesized separately. As the melamine content increased, the gelation time and peak temperature of MUF resins decreased. The adhesion performance of plywood showed that the one-batch MUF resin adhesive with 50% melamine content only satisfied the standard requirement of water resistance. Thus, the one-batch MUF resin adhesive with 50% melamine content was applied for bonding wood lamina from four softwood species such as Japanese larch, Korean red pine, Korean pine and Japanese cedar to manufacture Glulam under HF heating. All Glulam samples bonded with the one-batch MUF resin adhesives with 50% melamine content except those from Korean Red Pine satisfied the requirement in water soaking or boiling water delamination test as an exterior grade Glulam. The presence of rosin in Korean Red Pine was believed to be responsible for its poor adhesion. These results showed that the one-batch MUF resin adhesives with 50% melamine content provided acceptable water resistance with exterior grade Glulam manufactured under HF heating.

• Herbal Formula Science
• /
• v.26 no.4
• /
• pp.363-380
• /
• 2018

Objectives : We analyzed the principle of compatibility of socheongnyong-tang and expanded the range of application in clinical practice. Methods : Socheongnyong-tang was analyzed by the compatibility principle through the system of chief, deputy, assistant, and envoy, but the basic formulas of "Discussion of Cold Damage" and "Synopsis of the Golden Chamber" was used. Results : Socheongnyong-tang treats exterior wind-cold and interior water accumulation. Exterior wind-cold is treated mainly by exterior-releasing herbs constituting mahwang-tang and gyeji-tang in "Discussion of Cold Damage", and interior water accumulation is treated mainly by retained fluid-resolving herbs constituting yeonggamomigangsinha-tang, yeonggamomigagangsinbanhahaengin-tang and yeonggamomigagangsinbanhaengdaehwang-tang in "Synopsis of the Golden Chamber". Depending on the weight of exterior wind-cold and interior water accumulation, the disease condition is classified as a case where exterior wind-cold is heavier than interior water accumulation, a case where exterior wind-cold is lighter than interior water accumulation, and a case where it is equivalent. When exterior wind-cold is heavier than interior water accumulation, chief herbs are Ephedrae Herba and Cinnamomi Ramulus of exterior-releasing herbs series and deputy herbs are Zingiberis Rhizoma and Asari Radix et Rhizoma of retained fluid-resolving herbs series. When exterior wind-cold is equal to the disease condition of interior water accumulation, chief herbs are Ephedrae Herba of exterior-releasing herbs series and Zingiberis Rhizoma of retained fluid-resolving herbs series, and deputy herbs are Cinnamomi Ramulus of the exterior-releasing herbs series and Asari Radix et Rhizoma of retained fluid-resolving herbs series. When exterior wind-cold is lighter than interior water accumulation, chief herbs are Zingiberis Rhizoma and Asari Radix et Rhizoma of retained fluid-resolving herbs series and deputy herbs are Ephedrae Herba and Cinnamomi Ramulus of exterior-releasing herbs series. In any case, assistant herbs are Pinelliae Rhizoma, Paeoniae Radix alba, and Schisandrae Fructus, and envoy herb is Glycyrrhizae Radix preparata. Conclusions : In conclusion, socheongnyong-tang must differently formulate the system of chief, deputy, assistant, and envoy according to the grade of exterior wind-cold and interior water accumulation. These results suggest that socheongnyong-tang can be applied flexibly when applied in clinical practice to enhance the therapeutic effect.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.73-74
• /
• 2017

Below-grade concrete structure in residential buildings are exposed to various cracking conditions in between installation, construction and usage. Leakage follows the cracks along the exterior wall and floor slabs, and leakage occurring in this conditioning brings about discomfort to the users inside the building. This study analyzes a survey on the causes of leakage in below-grade concrete structure and proposes a solution method.

• Journal of Korean Society of Forest Science
• /
• v.111 no.2
• /
• pp.276-286
• /
• 2022

We carried out this study to provide basic data necessary to establish a management plan for concrete erosion control dams in the future by analyzing results of detailed inspections of aged dams conducted in accordance with 「Guidelines for the Maintenance of the Erosion Control Facility」. We analyzed the results of a detailed inspection of 54 concrete erosion control dams which had been built over 20 years previously, located in private forests of Gyeongsangbuk-do using statistical methods. Having conducted exterior defect investigations, we found 18 dams (33.4%) in need of repair or follow-up measures and 15 dams in which the overall grade was changed due to investigator's corrections; we therefore considered that standardization of related standards and indicators would be necessary. After conducting concrete compression strength tests, we found 19 dams (35.2%) to be below the standard value of 21 MPa, and in particular, we included, in grade A, eight dams which we judged to be in good condition as a result of the exterior defect inspection. There was little clear correlation between the total score and the compressive strength of concrete, but there was a statistically significant difference in the compressive strength by overall grade. After analyzing the changes in the characteristics of the erosion control dams according to the elapsed years after construction, we detected no particular trend in the changes of total score and compressive strength over time. However, the cumulative ratio of the dams that required repair and follow-up measures and the dams below the compression strength standard had a strong positive linear relationship over time, suggesting that it would be possible to identify the aging characteristics of concrete erosion control dams.

• The Mathematical Education
• /
• v.50 no.3
• /
• pp.367-381
• /
• 2011

It is important to concern about individual difference on every subject and every class. How can we know the individual difference? It is helpful for that to find out students' math learning style and learning type. In this paper, I conducted a survey to look for math learning style and math learning type of 4th, 5th and 6th grade students, and analyzed those data. The research findings are summarized as follows; First, 4th, 5th and 6th grade students prefer the visual learning style to the verbal style, and they have more wholistic tendency than analytical tendency in the domain of the cognitive learning style. Second, they prefer the authoritative and goal-oriented learning style to the practical and recreational learning style, and they have more interior-oriented than exterior-oriented in the domain of affective learning style. Third, the representative math learning type of 4th, 5th and 6th grade students is visual/holistic/authoritative and goal-oriented/interior-oriented. The math learning styles of students have a lot of influence on their learning, so that an appropriate teaching method for each student could arouse a maximum effect in the math study.

• Steel and Composite Structures
• /
• v.26 no.3
• /
• pp.329-345
• /
• 2018

This paper systematically investigated the mechanical performance of the weak-axis cover-plate connection, including a beam end monotonic loading test and a column top cyclic loading test, and a series of parametric studies for exterior and interior joints under cyclic loading using a nonlinear finite element analysis program ABAQUS, focusing on the influences of the shape of top cover-plate, the length and thickness of the cover-plate, the thickness of the skin plate, and the steel material grade. Results showed that the strains at both edges of the beam flange were greater than the middle's, thus it is necessary to take some technical methods to ensure the construction quality of the beam flange groove weld. The plastic rotation of the exterior joint can satisfy the requirement of FEMA-267 (1995) of 0.03 rad, while only one side connection of interior joint satisfied ANSI/AISC 341-10 under the column top cyclic loading. Changing the shape or the thickness or the length of the cover-plate did not significantly affect the mechanical behaviors of frame joints no matter in exterior joints or interior joints. The length and thickness of the cover-plate recommended by FEMA 267 (1995) is also suitable to the weak-axis cover-plate joint. The minimum skin plate thickness and a design procedure for the weak-axis cover-plate connections were proposed finally.