• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.1
• /
• pp.89-97
• /
• 2013

With regard to complex-shaped tall buildings whose plans and constructions have been gradually on the increase, this study was aimed to analyze their structural behaviors during construction by applications of construction sequences analyses to prototype models. For twisted tall buildings, total 18 models of with three conditions of a lateral load-resisting system, a twisting angle, and a construction method were selected. A diagrid system and a braced tube system were applied as a lateral load-resisting system. For each lateral load-resisting system, three types of plan with $0^{\circ}$, $1^{\circ}$, and $2^{\circ}$ twisting angles and three construction methods with construction sequences of exterior tube and interior frame were assumed. The structural performances of tall buildings under constructions were analyzed with results of lateral displacements from construction sequence analyses. Also, construction performances of the construction period and the maximum lift weight were compared.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.3
• /
• pp.63-71
• /
• 2003

According to the recent report, the lighting energy consumption of commercial buildings reaches to $30%\sim40%$ of the total energy consumption. It is more than that of cooling & heating energy consumption and it is the major target of energy-saving policy. It is obvious that they are interested in natural lighting device such as Light-shelf for the purpose of raising the lighting energy-saving efficiency. In most of highly developed countries, a thorough study on Light-shelf makes it possible to propose a practical plan while at home there leaves much to be desired to study a guiding principle of optimum plan in spite of its efficiency based on experiments using scale4 model and analysis of simulation. Aiming at making an optimum plan of Light-shelf suitable for the domestic situation, this study is worked by experiments using light-shelf and analysis of variables using illumination program. The experiments is to analyse the efficiency of Light-shelf on condition of the sky and the analysis is to make the simulation using illumination program. This study is composed of 1) the analysis of light with some variables such as presence of light-shelf and degree of angle using 1/2 scaled model 2) making the simulation using Lightscape, illumination program, In brief, concerning presence of light-shelf, it causes little difference in its efficiency in the overcast sky, whereas it decreases an illuminance of window side and provides inner side with the light, which decreases the ratio of the maximum to the minimum inner illuminance and makes the inner of illuminance to range evenly in the clear sky. On degree of angle, as the daylight increases in proportion of degree of angle, the ratio of the maximum to the minimum inner illuminance decreases, which makes it possible to increase the proportion of inner daylight.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.337-340
• /
• 2007

Construction CALS contributed to informatization of public construction sector and to settle construction leaders' mind on informatization of construction project, however, the effect of Construction CALS has reduced as the CALS system has been aged and a plan for spread-out of existing systems has not been established. It is necessary to maximize the effect by developing a future plan after recognizing the current state. This study provided key factors that Construction CALS should take for the bright future by using SWOT Analysis, an useful method to develop a strategy. Considering interior and exterior environments surrounding Construction CALS through investigating existing studies, this study deduced twenty five strength, weakness, opportunity and threat points, and finally this study proposed fourteen critical success factors. The results of this study made a significant contribution to decision of the milestone that Construction CALS should take.

• Journal of Information Technology Services
• /
• v.2 no.1
• /
• pp.51-73
• /
• 2003

The success of 2002 Korea Japan Worldcup became a good opportunity to give the message of revival to the people of Korea. With the effect of it, the national brand image has risen. Nevertheless, in order to maximize the chance of time, the most necessary thing that need to be done is to find the strategic counterproposal of the Post Worldcup. Especially, to find the more active plan in the respect of economy. In this research, we have studied the IT industry(especially SI industry) of the economy in order to look into the strategic counterproposal to get the development effect after the Worldcup. We mainly analyzed the SI industry in the respect of economy, because it is not only a high-value added industry of the integration of knowledge and technology but also a high-tech industry which has a spreading effect on the related industries. To implement the analysis of SI industry, derive and verify the strategy, and get the activating plan, we studied with 4 stages. Firstly, analyze the exterior environment and the interior strength with the Competitive Strategy Model(Specially, 7 Force Model & Value Chain Model). Secondly, get the strategy with SWOT analysis. Thirdly, verify the Strategy with interview and survey. Fourthly, classify the SI industry activation plan into 5 kinds after Worldcup through panel discussion and seminar with the data which we got through interview and survey.

• Journal of Korean Medical classics
• /
• v.35 no.1
• /
• pp.1-32
• /
• 2022

Objectives : This paper examines major symptoms representation in COVID-19 patients as groundwork for development of an effective clinical data collection format in Korean Medicine. Methods : Major symptoms representation in COVID-19 related papers published worldwide were collected. Corresponding symptoms in Korean Medicine were then examined, followed by discussion of symptomatic features that require further consideration in regards to a more systematic clinical data collection. Results : Of 256 papers, most papers listed fever and cough while symptoms such as difficulty breathing, diarrhea, muscle pain, headache, nausea, fatigue, chest pain, phlegm, nasal discharge were also mostly listed. Clinical representations could be categorized into general symptoms, throat symptoms, chest symptoms, head and facial symptoms, gastrointestinal symptoms, musculo-skeletal and cutaneous symptoms, psychiatric symptoms and sensory problems. Conclusions : Although each clinical representation could be likened to certain clinical representations of Korean Medicine, the variety of symptoms were too limiting and lacking in detail to be applied in the pattern identification[辨證] of Korean Medicine. For effective clinical data collection and analysis in the future, symptom change according to time, comparison between location, climate and ethnicity, existence of interior symptoms when diagnosing exterior symptoms, deficiency-excessiveness of blood patterns, consciousness levels, etc., need to be considered in establishing criteria for symptom evaluation.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.2
• /
• pp.169-180
• /
• 2017

Cyclic loading tests for beam-to-column weak-axis connections were performed to investigate the seismic performance. In this study, the connections were developed to improve the constructability on the basis of investigation for existing small-size steel structures. The primary test parameter is the number of high-tension bolts which are used to connect steel beam and column using exterior and interior flange plates. Test results showed that the number of bolts had a significant effect on the cyclic behavior of beam-column weak-axis connections. From the analysis of test results, it is concluded that more than four bolts in the connections can satisfy the requirements of semi-rigid connection presented in current design codes. All of specimens showed the bearing failure around bolt holes and fracture at the beam flange. However, when the web height and the flange width is relatively small, the number of the bolts used in the connections might be limited. Thus, the additional research in this area is needed.

• Journal of KIISE:Information Networking
• /
• v.29 no.5
• /
• pp.524-532
• /
• 2002

With the recent rapid progress of Internet, the higher speed network is needed to support the exploration of ambient information from text-based to multimedia-based information. Also, demands for additional Layer 3 routing technique, such as Network Address Translator (NAT) and Firewall, are required to solve a limitation of a current Internet address space and to protect the interior network from the exterior network. However, current router-based algorithms do not provide mechanisms to solve the congestion and fairness problems, while supporting the multimedia services and satisfying the user requirements. In this paper, to solve these problems, a new active queue management, called MFRED (Multiple Fairness RED) algorithm, is proposed. This algorithm can efficiently reduce the congestion in a router or gateway based on the Layer 3 routing technique, such as NAT. This algorithm can improve the fairness among TCP-like flows and unresponsive flows. It also works well in fairly protecting congestion-sensitive flows, i.e. fragile TCP, from congestion-insensitive or congestion-causing flows, i.e. robust TCP.

• The Journal of Korean Association of Computer Education
• /
• v.19 no.6
• /
• pp.15-23
• /
• 2016

Recently the era of software integration which is expressed in words of the fourth industrial revolution has begun. Thus the need of the software education for the non-major preservice teachers who are cultivating future talent has been increasing and it is necessary to foster a positive attitude toward software education of non-major preservice teachers. The purpose of this study is to verify the causality between the computer learning attitude factors of non-major preservice teachers in the software education class. To analyze the causality, we performed correlational analysis and regression analysis between the exterior factors of attention, self-learning, application of learning and the other interior factors of computer learning attitude. As a result, the significant factor of attention was interests, and the significant factor of self-learning was superiority, and the significant factors of the application of learning were the sense of purpose and the motive of accomplishment.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.6
• /
• pp.732-739
• /
• 2014

This research was performed to investigate the effect of recent climate changes on wood decay hazard index (Scheffer index) in Korea. The index was determined using a climate data of 58 different locations obtained from the website of Korea Meteorological Administration (KMA), and the wood decay hazard index was determined at the intervals of 10 years. Most of regions in Korea except Juju island showed wood decay hazard index values between 35 and 65, considered to be moderate decay hazard zones. But in recent 10 years (2003~2012), the wood decay hazard index was rapidly increased, resulting in showing many high decay hazard regions. The trend may be explained by the in crease of temperature and precipitation. The recent climate change of Korea turning into the weather of subtropical region may explain the increase of wood decay hazard index.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.4
• /
• pp.481-487
• /
• 2002

Currently, the load transfer's mechanism from a beam to a column has yet to ve clarified in a concrete filled steel tubular (CFT) structure with a connection type of an exterior diaphragm. The loads for each floor are transferred to the concrete core from a steel beam through ha contacted face between an in-filled concrete and the interior surface of a steel tube. Thus, a Push-Out test was performed to investigate the load transfer mechanism. A total of 30 samples were tested to confirm the bond stress and/or axial load distribution between a steel tube and in-filled concrete for CFT column. The main parameters considered for this study included concrete type, steel tube-shape/length, and the effect of a weld joint wit ha backing strip for a column splice. Test results were summarized to confirm load transfer behavior between a concrete and steel tube for each experimental parameter, using the analytical approach to verify experimental results.