• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.775-784
• /
• 2009

Weathered foliation could act as a critical failure plane because this type of plane tend to have low roughness and long extensions. A big constructed slope at $\bigcirc\bigcirc$ road construction site was failed due to the block movement along a fault zone which is parallel to foliation. Tectonic activity reactivated a fault zone parallel to foliation, and the fault clay within the shear zone metamorphosed retrogressively to chrolite. The failed block moved when the block weigh lost the balancing with the resisting force of the retrogressively metamorphosed chrolite. Evaluating the three dimensional distribution of the foliation was critical for establishing a plan for the stabilization of the slope. For this purpose, 10 boreholes were drilled as a lattice distribution, and the BIPS analyses are performed at each boreholes. The fractures measured in the boreholes are projected into 15 cross sections and their distributions are analysed, using Fracjection software. The projection analyse show that the strike of the foliation gets dipper towards left side of the slope. This geometry indicates that there are more failure block geometry at left side of the slope. Potential failure planes are searched using the projection method, and these information are provided for further support design.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.4
• /
• pp.314-321
• /
• 2016

Conventional removable partial dentures (RPDs) with distal extensions are associated with some problems, including lack of stability that calls for frequent relining, and cantilever actions of claps that can produce excessive loading to abutment teeth, and the need for unesthetic retentive arm clasps. Therefore, IARPDs (Implant-assisted RPD) that use implants to support or retain RPDs has been reported to improve stability, esthetics and masticatory performance of RPDs. Also, an IARPD that has zirconia occlusal table can prevent the incongruity of occlusal plane and the extrusion of antagonistic tooth. In this case of partially edentulous patient with crossed occlusion, each edentulous area was restored with implant fixed prosthesis and implant retained partial denture to suit each situation. Through the procedure, satisfactory outcomes were achieved both in functional and esthetic aspects.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.4
• /
• pp.297-305
• /
• 2009

Ores of the Jeonnam pyrophyllite province mainly consist of not only pyrophyllite but also kaolinite, and they usually contain minor amounts of muscovite and quartz. We usually call them as porcelaneous stones which usually show lower grade characteristics in the viewpoint of Korean nonmetallic industries. Mineralogical studies for the ores and their intimate formations revealed that another kind of clay minerals could have been produced from the volcanic sediments with similar ages and compositions. Corundum is commoner than the diaspore in the pyrophyllite deposits, and so diaspore can be regarded as one of temporary minerals from which corundum would be finally formed. Kaolinite deposits contain neither diaspore nor corundum, but alunites produced by an advanced argillic alteration are often observed in the upper portions of the kaolin ores. The lowest formation interbedded with pyrophyllite and/or kaolinite ores usually contain purple tuff bed on the uppermost part, and in ascending order, siliceous formation, fine ash tuff and lapillistone are found in the study areas. As ages are becoming younger, amounts of pyrophyllite and kaolinite are radically decreased, or disappeared completely. On the other hand, content of muscovite is slightly increased, and those of plagioclase feldspars and quartz are found to have been preserved from the original rocks during alteration process. Most of ore bodies show rather well bedded formations which are easily discernable in the outcrops, but more effective discremination is desirable where rather massive ores exist. Siliceous beds and purple tuff ones on the upper part of ore bodies would be useful as marker horizons or key beds which have distinct lithologies and extensions.

• Journal of KIISE:Databases
• /
• v.31 no.6
• /
• pp.684-698
• /
• 2004

The Hippocratic database model recently proposed by Agrawal et al. incorporates privacy protection capabilities into relational databases. Since the Hippocratic database is based on the relational database, it needs extensions to be adapted for XML databases. In this paper, we propose the Hippocratic XML database model, an extension of the Hippocratic database model for XML databases and present an efficient access control mechanism under this model. In contrast to relational data, XML data have tree-like hierarchies. Thus, in order to manage these hierarchies of XML data, we extend and formally define such concepts presented in the Hippocratic database model as privacy preferences, privacy policies, privacy authorizations, and usage purposes of data records. Next, we present a new mechanism, which we call the authorization index, that is used in the access control mechanism. This authorization index, which is Implemented using a multi-dimensional index, allows us to efficiently search authorizations implied by the authorization granted on the nearest ancestor using the nearest neighbor search technique. Using synthetic and real data, we have performed extensive experiments comparing query processing time with those of existing access control mechanisms. The results show that the proposed access control mechanism improves the wall clock time by up to 13.6 times over the top-down access control strategy and by up to 20.3 times over the bottom-up access control strategy The major contributions of our paper are 1) extending the Hippocratic database model into the Hippocratic XML database model and 2) proposing an efficient across control mechanism that uses the authorization index and nearest neighbor search technique under this model.

• Journal of KIISE:Information Networking
• /
• v.30 no.3
• /
• pp.377-386
• /
• 2003

In this paper, we present an application layer protocol to support secure wireless Internet services, called Application Layer Security(ALS). The drawbacks of the two traditional approaches to secure wireless applications motivated the development of ALS. One is that in the conventional application-specific security protocol such as Secure HyperText Transfer Protocol(S-HTTP), security mechanism is included in the application itself. This gives a disadvantage that the security services are available only to that particular application. The other is that a separate protocol layer is inserted between the application and transport layers, as in the Secure Sockets Layer(SSL)/Transport Layer Security(TLS). In this case, all channel data are encrypted regardless of the specific application's requirements, resulting in much waste of network resources. To overcome these problems, ALS is proposed to be implemented on top of HTTP so that it is independent of the various transport layer protocols, and provides a common security interface with security applications so that it greatly improves the portability of security applications. In addition, since ALS takes advantages of well-known TLS mechanism, it eliminates the danger of malicious attack and provides applications with various security services such as authentication, confidentiality integrity and digital signature, and partial encryption. We conclude this paper with an example of applying ALS to the solution of end-to-end security in a present commercial wireless protocol stack, Wireless Application Protocol.

• Journal of KIISE:Software and Applications
• /
• v.27 no.1
• /
• pp.50-61
• /
• 2000

Recently the stereo vision based on conics has received much attention by many authors. Conics have many features such as their matrix expression, efficient correspondence checking, abundance of conical shapes in real world. Extensions to higher algebraic curves met with limited success. Although irreducible algebraic curves are rather rare in the real world, lines and conics are abundant whose products provide good examples of higher algebraic curves. We consider plane algebraic curves of an arbitrary degree $n{\geq}2$ with a fully calibrated stereo system. We present closed form solutions to both correspondence and reconstruction problems. Let $f_1,\;f_2,\;{\pi}$ be image curves and plane and $VC_P(g)$ the cone with generator (plane) curve g and vertex P. Then the relation $VC_{O1}(f_1)\;=\;VC_{O1}(VC_{O2}(f_2)\;∩\;{\pi})$ gives polynomial equations in the coefficient $d_1,\;d_2,\;d_3$ of the plane ${\pi}$. After some manipulations, we get an extremely simple polynomial equation in a single variable whose unique real positive root plays the key role. It is then followed by evaluating $O(n^2)$ polynomials of a single variable at the root. It is in contrast to the past works which usually involve a simultaneous system of multivariate polynomial equations. We checked our algorithm using synthetic as well as real world images.

• Parasites, Hosts and Diseases
• /
• v.31 no.4
• /
• pp.301-314
• /
• 1993

An electron microscopic study was performed to observe the ultrastructure of the tegument of U seoulensis. The outer surface of the tegument was covered with a tnlaminated plasma membrane. The electron-dense cytoplasmic layer was $2.5{\;}\mu\textrm{m}$ wide In the anterior portion and contained numerous vacuoles, mitochondriae and granular materials in its matrix. The basement layer was 330 nm wade or so, and Its numerous extensions protruded into the cytoplasmic layer. The sensory organ was composed of a small vesicle of $1.7{\;}{\times}{\;}1.1{\;}\mu\textrm{m}$ in dimensions, which possessed a cilium of $1.2{\;}{\times}{\;}0.19{\;}\mu\textrm{m}$ in size. The pharynx was composed of the epithelial layer of about $0.5{\;}\mu\textrm{m}$ wide, well developed muscle layer and basement layer. The tegument of the oral sucker was composed of a cytoplasmic layer of $0.4-0.5{\;}\mu\textrm{m}$ width, a narrow basement layer, a well developed muscle layer and tegumental cells. Some kinds of secretory granules that seemed to be originated from the cells of the oral sucker were observed In the parenchymal portions of the adjacent cells. The tribocytic organ consisted of numerous microvilli. The microvilli were 5 nm wide and heptalaminated. Two types of secretory granules originated from the gland cells of tribocytic organ were observed In the tegument and parenchyme. The tegumental cells were irregular in shape, and of which nuclei were multifarious.

• Korean Journal of Food Science and Technology
• /
• v.38 no.1
• /
• pp.42-46
• /
• 2006

Rheological properties of the dough added with milk proteins and gums was studied to investigate the possibilities as anti-staling agents. Also, physical properties of the resultant bread baked from the frozen dough after 8 weeks of storage at $-20^{\circ}C$ were examined. The 4 sets of their combinations of milk proteins and gums, $casein-{\kappa}-carrageenan$ (CK), casein-sodium alginate (CA), $whey-{\kappa}-carrageenan$ (WK), and whey-sodium alginate (WA), were added to dough to examine their possible anti-staling effects. Rheological properties of dough were evaluated, and physical properties of resultant bread baked from frozen dough after 8 weeks storage at $-20^{\circ}C$ were examined. Addition of all treatments increased gelatinization temperature and water absorption, and lowered miximum viscosities and extension of doughs, compared to the control. Doughs added with CA and WA showed longer development times than that of the control. Addition of WK and WA resulted in lowest dough extensions. Treated bread showed lower moisture content decrease during storage at $5^{\circ}C$ for 4 days. Breads baked with frozen doughs after 6 weeks storage at $-20^{\circ}C$ showed similar results. Although textural hardness of breads increased with storage at $5^{\circ}C$, CA- and WA-added breads were less affected, showing they effectively retarded staling of breads.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.4778-4787
• /
• 2011

The purpose of this study to develop IT Outsourcing service quality evaluation measurement have been frequently used to apply a model KS-SQI in the service industry. Primary needs fulfillment, unexpected benefits, reliability, individual empathy, positive assistance, accessibility and physical environment were selected as independent variable, they evaluate IT outsourcing service quality in order to verify their suitability as a tool for IT outsourcing service evaluation measurement, to analyze how that affects IT outsourcing satisfaction, and to investigate whether affecting IT outsourcing satisfaction on recontract intentions. To validate the hypothesis by path analysis conducted between variables using LISREL, primary needs fulfillment, reliability, individual empathy, positive assistance, accessibility and physical environment have significant effect on IT outsourcing satisfaction, but unexpected benefits don't have effect on IT outsourcing satisfaction, and IT outsourcing satisfaction showed significant effect on recontract intentions. Six Measurement tools has been proved to be suitable as a IT outsourcing service quality evaluation tool. Contribution of this study to evaluate the quality of IT outsourcing services, KS-SQI model developed by applying the measuring tool was achieved theoretical extensions and practical aspects of a recontract with the provider of IT outsourcing and IT outsourcing services for as a tool to assess the quality of can be used.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.4
• /
• pp.139-148
• /
• 2015

In this paper, the optimum coding method is proposed by using open library in order to improve the performance of a software correlator developed for Korea-Japan Joint VLBI Correlator(KJJVC). The correlation system for VLBI observing system is generally implemented with hardware using ASIC or FPGA because the computational quantity is increased geometrically according to the participated observatory number. However, the software correlation system is recently constructed at a massive server such as a cluster using software according to the development of computing power. Since VLBI correlator implemented with hardware is able to conduct data processing with real-time or quasi real-time compared with mostly observational time, software correlation has to perform optimal data processing in coding work so as to have the same performance as that of the hardware. Therefore, in this paper, the experimental comparison was conducted by open-source based fftw library released in FFT processing stage, which is the most important part of the correlator system for performing optimum coding work in software development phase, such as general method using fftw library or methods using SSE(Streaming SIMD Extensions), shared memory, or OpenMP, and method using merged techniques listed above. Through the experimental results, the proposed optimum coding method for improving the performance of developed software correlator using fftw library, shared memory and OpenMP is effectively confirmed by reducing correlation time compared with conventional method.