• Wind and Structures
• /
• 제21권6호
• /
• pp.609-623
• /
• 2015

Seismic reliability analysis of a jacket-type support structure for an offshore wind turbine was performed. When defining the limit state function by using the dynamic response of the support structure, a number of dynamic calculations must be performed in a First-Order Reliability Method (FORM). That means analysis costs become too high. In this paper, a new reliability analysis approach using a static response is used. The dynamic effect of the response is considered by introducing a new parameter called the Peak Response Factor (PRF). The probability distribution of PRF can be estimated by using the peak value in the dynamic response. The probability distribution of the PRF was obtained by analyzing dynamic responses during a set of ground motions. A numerical example is presented to compare the proposed approach with the conventional static response-based approach.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1691-1696
• /
• 2010

Jeong-Ji overbridge is designed to be 9.3km long, the longest for a high speed railway bridge ever constructed in Korea. This bridge is constituted of three types of structure. Standard type bridge is 35m PSC Box bridge which will be constructed by Precast Span Method. To cross the Cheonan Nonsan Expressway, 80m three-span steel arch bridge is designed to avoid rail expansion joint. Finally, Extradosed bridge is planned for high speed railway bridge for the first time in Korea based on originative and advanced design techniques. It is expected that this will contribute to the development of national technology for long-span high speed railway bridges.

• 한국정보전자통신기술학회논문지
• /
• 제1권2호
• /
• pp.57-63
• /
• 2008

In this paper, we develop the Hipass antenna that is used in electronic tall-gate charging (ETC) system in Korea expressway. This antenna has circular polarized characteristics, and especially has 45 degree tilted beam properties. These properties are very effective in ETC communication between the vehicle antenna and the tall-gate antenna. To achieve these properties on a small microstrip type antenna structure, we propose a annular ring microstrip antenna with stubs. When the length and angle of stubs are changed, the direction of the circular polarized beam is generally tilted by $45^{\circ}$ in elevation angle. Especially, by using the stubs in inner area or outer area of ring antenna, it is found that the beam direction of in azimuth angle can be rotated.

• 대한토목학회논문집
• /
• 제14권2호
• /
• pp.299-305
• /
• 1994

연속철근 콘크리트포장(CRCP)의 공용성 추적조사를 위한 시험포장이 판교-구리간 고속도로에 시공되어 지금까지 2년간의 초기 공용성 조사가 진행되었다. 본 고에서는 본 시험포장의 초기재령 거동 및 온도변화 특성을 분석하였고 그 결과를 미국 휴스턴에서 실시된 유사한 시험포장에 대한 결과와 비교하였다. 연구 결과 판교-구리 시험포장은 초기균열의 발생패턴 측면에서 휴스턴 시험포장보다 대체적으로 좋은 결과를 보여주었다. 또한 초기균열의 억제 측면에서 2종 시멘트가 1종에 비해, 그리고 오후 포설이 오전 포설보다 효과적인 것으로 보여진다.

• 한국도로학회논문집
• /
• 제15권3호
• /
• pp.9-16
• /
• 2013

PURPOSES: There is a need to develop a method to incorporate tire-pavement noise in the pavement management system. Tire-pavement noise highly depends on the characteristics of pavement texture. Therefore, estimation of texture characteristics may give useful information to predict tire-pavement noise. This study aimed to find the relationship between tire-pavement noise and MPD(Mean Profile Depth) for concrete pavement. METHODS: MPD and tire-pavement noise were collected on the number of expressway sections including Central Inland Test Road in Korea. Statistical analysis was performed to find the correlationship between MPD and tire-pavement noise. In addition, multiple regression analysis to find the tire-pavement noise based on MPD and type of concrete pavement texture. RESULTS: Linear relationship between MPD and tire-pavement noise is observed for concrete pavement. Furthermore, a forensic equation to estimate tire-pavement noise based on MPD and texture types of concrete pavement is suggested. CONCLUSIONS: Tire-pavement noise on concrete pavement can be predicted based on the consideration of texture type and MPD estimation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.677-694
• /
• 2009

While the budget has been allocated more for repairs and reinforcements, casualties are gradually increased due to slope disaster. Slope disaster causes road damaged as well as casualties. It also causes significant social and economic loss. The measurement device, which is installed inside ground of slope like inclinometer, has the high loss rate when slope is being slided. The electric type and the vibrating wire type have low durability because of corrosion. To cover the demerit of the present slope monitoring, the measurement method using the Multi-Antenna GPS has been developed. The Multi-Antenna GPS has been installed in the local slope as the regular monitoring system for slope. Although the initial cost of the Multi-Antenna GPS for installation is high, the additional cost is low. So it is the suitable method for large slope. The regular monitoring system using the Multi-Antenna GPS is the suitable measurement method for watching slope collapse, which is occurred widely, because it is economical, has high durability, and collects data with high resolution.

• 대한교통학회지
• /
• 제25권6호
• /
• pp.79-88
• /
• 2007

설계시간교통량(DHV: Design Hourly Volume)은 도로설계의 기본이 되는 장래시간 교통량으로, 계획목표년도에 대상 도로구간을 통과할 것으로 예상되는 한 시간 교통량을 말한다. 설계시간계수(K)는 "계획목표연도의 연평균 일교통량에 대한 설계시간 교통량의 비율(DHV/AADT)"로 정의되며, 30번째 시간 교통량을 이용할 경우 설계시간계수는 $K_{30}$으로 나타낸다. 적정규모의 도로를 설계하기 위해서는 합리적인 교통량의 예측 및 도로의 지역특성과 교통특성을 반영한 설계시간계수(DHF : Design Hour Factor)를 산출하는 것이 중요하다. 본 연구에서는 고속도로를 지역적 특성별로 유형분류한 후, 서해안 고속도로 차량검지기자료의 연간 시간대별 교통량자료를 이용하여 고속도로 설계시간계수를 구하였다. 분석결과 정기교통량조사 자료와 차량검지기자료에서 연평균일교통량은 유사한 반면, 첨두시간교통량은 특히 관광부에서 상당한 차이를 나타냈다. 정기교통량조사 자료는 실제 시간교통량 특성을 반영하기가 어려워 정기교통량조사 자료를 이용한 평균설계시간계수는 기존 지침이나 연구에서 제시되었던 결과와 다르게 산출되었으며, 기존 지침과 상반되게 도시부가 지방부와 관광부보다 더 높게 나타났다. 반면 차량검지기자료를 이용하여 구한 설계시간계수는 기존 지침에서 제시되고 있는 설계시간계수와 비교하여 도시부는 유사하게, 지방부는 약간 높게 산출되었다. 따라서 서해안고속도로에 대한 분석결과만을 이용하여 해석할 때 정기교통량 자료를 이용하는 것보다 차량검지기 자료를 이용하여 산정한 설계시간계수가 기존 관련지침에 제시된 값들과 비교적 유사하며, 합리적인 결과를 도출하여 신뢰성을 갖는 것으로 분석되었다.

• 한국지반신소재학회논문집
• /
• 제18권3호
• /
• pp.11-22
• /
• 2019

본 연구는 양산단층대를 통과하는 고속도로 건설공사 중 암반비탈면의 파괴가 유난히 많이 발생된 원인을 규명하기 위하여 수행하였다. 이를 위해 128개소의 양산단층대 파괴 암반비탈면 대하여 불연속면 유형(절리, 층리, 단층)에 따라 face mapping과 역해석을 통해 전단강도(점착력, 내부마찰각)를 재 산정하였다. 재 산정된 점착력과 내부마찰각에 대해 분석을 하였으며 기존 문헌 및 설계 값과도 비교를 하였다. 전체적으로 본 연구에서 재 산정된 점착력과 내부마찰각이 기존 문헌 및 설계에 적용된 값보다 작은 것으로 나타났다. 이와 같은 이유로 시공 중 많은 암반비탈면에서 파괴가 발생된 것으로 보인다. 이것은 연구 대상 지역의 쇄설성퇴적암이 가지고 있는 특성과 발달된 불연속면이 큰 역할을 한 것으로 판단된다. 특히 층리 불연속면인 경우 기존 값과 비교 시 가장 큰 차이를 보이는 것으로 나타났다. 불연속면에 점토충진물이 존재하는 경우 불연속면의 유형에 따라 전단강도가 서로 다른 경향을 보이는 반면, 파쇄물이 존재하는 경우에는 전단강도 값은 불연속면의 유형에 상관없는 것으로 나타났다.

• 한국측량학회지
• /
• 제33권6호
• /
• pp.595-603
• /
• 2015

With the advances of the big-data process technology, acquiring the real-time information from the massive image data taken by a mobile device inside a vehicle will be possible in the near future. Among the information that can be found around the vehicle, the route information is needed for safe driving. In this study, the automatic extraction of route information from the road sign imagery was dealt with. The scope of the route information in this study included the route number, route type, and their relationship with the driving direction. For the recognition of the route number, the modified Tesseract OCR (Optical Character Recognition) engine was used after extracting the rectangular-road-sign area with the Freeman chain code tracing algorithm. The route types (expressway, highway, rural highway, and municipal road) are recognized using the proposed algorithms, which are acquired from colour space analysis. Those road signs provide information about the route number as well as the roads that may be encountered along the way. In this study, such information was called “OTW (on the way)” or “TTW (to the way)” which between the two should be indicated is determined using direction information. Finally, the route number is matched with the direction information. Experiments are carried out with the road sign imagery taken inside a car. As a result, route numbers, route number type, OTW or TTW are successfully recognized, however some errors occurred in the process of matching TTW number with the direction.

• 한국도로학회논문집
• /
• 제18권5호
• /
• pp.1-9
• /
• 2016

PURPOSES : This study focuses on the evaluation of interface performance with varying surface texture and tack coat application in an asphalt overlay. METHODS : The evaluation is carried out in two phases: tracking test and interface bond strength test. Using an image processing tool, tracking test is conducted to evaluate the susceptibility of the tack coat material to produce excessive tracking during application. Using the pull-off test method, the bond strength test is performed to determine the ability of the interface layer to resist failure. RESULTS : Results show that the underseal application yields less tracking compared to other applications. However, the bond strength is barely within the minimum acceptable value. On the other hand, RSC-4 produces higher bond strength for all surface types, but the drying time is long, which produces excessive tracking. CONCLUSIONS : While underseal application may be suitable for a trackless condition, the bond strength is less appealing compared to the rest of the tack applications available. RSC-4 demonstrated a high and consistent bond strength performance, but more time is required for drying to avoid excessive tracking. Tack coat application and surface type combination produce varying results. Therefore, these should be considered when selecting suitable future tack coat application options.