• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.638-645
• /
• 2010

This study introduces a reinforcement work case using Twin-Jet Method. The area is located behind the abutment of the bridges built on soft clay along the $\bigcirc\bigcirc$ Express Highway. Its foundation was constructed by installing EPS blocks on the original ground to reduce the embankment load under the highway. However, the ground deformation has continuously occurred due to the settlement of the foundation soft cohesive soils. The amounts of subsidences at the surface turned out to be 20~30.0mm, After the pavement patch work on April 23, 2009, a drastic subsidence occurred together with 10mm swell, For this reason, Twin-Jet grout column construction was applied by passing through the EPS banking blocks without closing traffic flows on the express highway. The outcomes of core sample tests after reinforcing the ground turned out to be TCR 92.5%, RQD 64.6% and unconfined compressive strength 2.3~8.6Mpa. The test results showed that the condition of the ground foundation had improved using Twin-Jet grouting in most layers of ground including the cobble and gravel layer.

• Journal of Korean Society of Transportation
• /
• v.24 no.5 s.91
• /
• pp.109-121
• /
• 2006

The road should be designed in the consistent alignment which the driver can drive safely. Also, proper highway environments in order to maintain optimal operational speeds on highway sections should be provided In design stage, for highway environments, it is essential for an operational speed estimation model to different highway environments. If a method which could evaluate the status of the road safety is developed through this operational speed estimation model, it is possible to provide safe and more comfortable highways to road users. In the study factors to effect on operational speeds are classified into three groups horizontal & vertical alignments and traffic operation characteristic factors. Factors are chosen to effect on operational speeds by using collation analysis as classifications of tangent sections, horizontal curve sections and vertical curve sections. In order to develop operational speed estimation models in express highways, multi-regression analysis has been used in this study using the selected factors. This study has meaning that the developed estimation models for operational speeds and evaluation of degree of safety to horizontal and vortical alignments simultaneous. In order to represent whole area of the country with the developed models, the models should be re-analyzed with vast data related with road alignment factors in the near future.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.120-125
• /
• 2008

The purpose of this case study is to find out current issue and improvement directions of the application of 3D and 4D to the construction project including building, highway and railway projects. For the study, the main functions of the 3D and 4D simulation of current system are analyzed and proposed improvement directions for 3D CAD utilization in 4D environment. Case studies of CAD application include land development for housing complex, highway project and express railway project.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.648-651
• /
• 2004

Many damage models has been developed to express the degradation of materials. However, only minor damage model for concrete has been developed because of the heterogeneity of it unlike metals. To model the damaged behavior of concrete, this peculiarity as well as a load-induced anisotropic feature must be considered. In this paper, basic concepts of the thermodynamic theory is investigated to model the behavior of the damaged concrete in the phenomenological viewpoint. And the general constitutive relations and damage evolution equations are investigated too.

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.253-258
• /
• 2002

The Incheon International Amort Railroad (IIAR) is the railroad that connects Incheon International Airport, Gimpo Airport and Seoul Station. IIAR is now under construction, and it will be finished to Gimpo Amort by 2006, to Seoul Station by 2008. But IIAR is not only so late to start but also has no discussion about effective connecting methods to existing railroads and fine operation plan. Therefore, after IIAR opens, it is possible for IIAR to lose to limousine bus using highway. So, this paper proposes 4 effective connecting methods for IIAR - (1) Shuttle transport, (2) Short-distance connecting transport (Inside IIAR, Seoul Subway Line 9, 'Han-River line') (3) Mid-distance connecting transport (Jung-ang, Tae-baek, Young-dong line) (4) Long-distance connecting transport (Korean Train express (korean high speed railroad)) These methods can increase the connectivity of IIAR with existing railroads and the competition power of IIAR against highway.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.621-626
• /
• 2005

Recent increases in construction costs on Korean public works projects, largely due to change orders caused by poorly elaborated design, become a motivation of applying VE process in Korean construction industry. The Seoul Toll Plaza project, recently value analyzed by four VE teams, demonstrates how value management helps save time, money and increase functional performance. The objective of this project is to upgrade and expand existing pay and ticket booths system on "Kyungboo Express Highway", the main artery for the Korean peninsula linking Seoul to Pusan. The value management study generated several innovate alternatives capable of saving up to 50% of project cost from the baseline project plan.

• Journal of the Korea Convergence Society
• /
• v.9 no.4
• /
• pp.1-7
• /
• 2018

Electric motors for electric vehicles differ in efficiency characteristics depending on the operation modes, studies for evaluating high efficiency characteristics in low speed and high speed operation modes are very important. Therefore, it is necessary to design method that can change the high torque, high output density, and high efficiency characteristics of driving motors for electric vehicles. In this paper, the diameter ratio of stator and rotor for the interior permanent magnet synchronous motor is change of designed 0.62, 0.65, and 0.68, respectively, and the efficiency characteristics of the entire operation section, average efficiency characteristics of the city driving modes and express highway driving modes are analyzed. As a result of analyzing the efficiency characteristics of the entire operating section, it was confirmed that as the diameter ratio increases, the high efficiency section moves to the low speed and low torque section and the high efficiency section moves to the high speed and low torque neighborhood as the diameter ratio decreases. As a result of analyzing the average efficiency characteristics in the city driving modes and express highway driving modes, the average efficiency of 0.68 model is analyzed to be more efficient than the 0.63 and 0.65 model ratio, and it is confirmed that it is suitable for city driving modes and express highway driving modes.

• Journal of the Korean Society for Railway
• /
• v.8 no.6 s.31
• /
• pp.610-616
• /
• 2005

The Incheon International Airport Express(I'Rex) is the railroad that connects Incheon International Airport, Gimpo Airport and Seoul Station. I'Rex is now under construction, and it will be connected to Gimpo Airport by 2007, to Seoul Station by 2010. However, there has been no discussion on how th connect different routes of railway Systems. Therefore it seems likely that rail passenger demand will be lower than that of limousine bus. Therefor, this paper proposes 4 effective connecting methods for I'Rex - (1) Shuttle transport, (2) Short-distance connecting transport (Inside I'Rex, Seoul Subway Line 9, 'Han-River line') (3) Mid-distance connecting transport (Jung-ang, Tae-baek, Young-dong line) (4) Long-distance connecting transport (Korean Train Express (Korean high speed railroad)) These methods can increase the connectivity of I'Rex with existing railroads and the competition power of I'Rex against a highway.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.157-165
• /
• 2011

With respect to the trend of highway traffic accident, highway accident is in decline, whileas, the fatality is on an increasing trend. Thus, many efforts to decrease highway traffic accidents and improve the safety, are required. In particular, in case of highway, the management standard by grade for accident black spot is designated. Thus, investing the effect factors by grade for highway traffic accident is required in detail. Thus, in this study, the factors affecting the traffic accidents among the environmental factors based on the graded data for the accident black spot in the applicable section targeting the Seoul-Pusan Express Highway, were reviewed; accident forecasting model which would analyze the characteristics of the accidents for determining the accident grade, was developed. As a result of establishing a model by using Quantification Theory of Type II, considering the characteristics of the dependent and independent variables based on the geometric structure, 'the fixed variable' among the variables relating to the accident, for the variables influencing over the accident grade, 'the type of vans, a chassis and people', 'the trailers, special vehicles and chassis people' and 'the negligence of watching and cloudy weather' were analyzed as common factors, in case of 'horizontal alignment', 'longitudinal slope' and, 'barricade' respectively.

• Journal of Environmental Policy
• /
• v.7 no.2
• /
• pp.91-104
• /
• 2008

In foreign countries, efforts are in progress to apply guidelines to minimize the loss of biodiversity within environmental assessment, yet those efforts have not been considered in Korea. If this continues, biodiversity in our nation will quickly diminish. Therefore, Korea needs to urgently prepare guidelines that minimize the loss of biodiversity. In this study 32 environmental impact assessment statements on express-highway construction projects were analyzed to evaluate potential problems with the current EIA system and to provide ideas on how to introduce a biodiversity/ecosystem item into the system. In the analyses of the 32 statements, few contents that deal with habitat/biodiversity were found and a lack of assessment of biodiversity issues was noticed in the EIA system in Korea. The system, therefore, should be improved to consider biodiversity issues in the survey, to predict impacts on biodiversity, and to establish corresponding mitigation measures.