• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.2
• /
• pp.323-336
• /
• 1996

This is a retrospective study on the patients with infection of the oral and maxillofacial region with the purpose of obtaining some useful data for diagnosis and treatment plan of that relatively common disease in dentistry. The used materials of study were 87 in total, including 52 male patients, 35 female patients who diagnosed and treated at the Department of the Dentistry in Hanyang Medical College Hospital for the period of Jan. 1990 to Dec. 1994. The author analyzed the distribution and incidence of sex, age, admission period, etiologic factors, etiologic teeth, treatment method of infections, pus culture, antibiotics sensibilities and medication. The result obtained as follows : 1. The developmental incidences by sex was superior in male by the ratio of 1.5 : 1 and the infection was most frequently occurred during the third decades(35.6%). 2. The number of admitted patients elevated in February, March, and April, and average of admission period was 9.8 days. 3. Main etiologic teeth showed on lower molar region in adult(63%) and upper molar region in primary dentition(46.1%). 4. Medications were administrated in all of the cases, and surgical incision and drainage were performed in 53% and extraction of the causative teeth were performed in 63.6% of all cases. 5. The most common involved fascial spaces were Buccal space(41.4%), Infraorbital space(27.6%), Submandibular space(16.1%),in order, and 9 cases(10.3%) were Ludwig's Angina. In 68.2% of the patients, and infection involved only one fascial space and in 21.8% of the patients, it involved to more fascial spaces. 6. The most causative organisms isolated from pus culture were Gram-positive facultative cocci(55.5%), and antibiotics sensitivities on the total isolated bacterial strains were exposed chloramphenicol(88.6%), Cephalothin(88.6%), Erythromycin(81.5%), Lincomycin(77.8%) in order, but it showed resistant on Gentamycin(58.3%), Tetracycline(56.5%), Methicillin(38.5%).

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.3
• /
• pp.275-286
• /
• 2013

It is well known that exposure to high level of PM (particulate matter) can adversely affect human health. However, little is known about health burden of PM considering the relationship, exposed level of PM, and health level in local communities. And, there is scarcely methodical assessment of uncertainty for application to policies of these assessment results. The scope of this study is divided into two parts: firstly to estimate the death burden of PM10 (particulate matter less then $10{\mu}m$ in diameter) in Seoul metropolitan region, and secondly to evaluate potential uncertainties in these estimates. To estimate the death burden of PM10 in Seoul metropolitan region from 2005~2010, we firstly assessed the relationship between daily mean PM10 and daily death counts in Seoul from 2000~2010, and calculated the death burden of PM10 using BenMAP (Environmental Benefits Mapping and Analysis Program). After that, we identified and characterized uncertainties to substantially influence the results of death burden. The daily mortality risk was increased 1.000227 times (p-value/0.001) associated with $1{\mu}g/m^3$ increase of daily mean PM10 for all ages population, Seoul. And, death burdens of PM10 in Seoul metropolitan region were estimated from 5.51 in 2005 to 5.12 in 2010 per 100,000 people. Finally, we categorized context, model, and input uncertainty and characterized these uncertainties in three dimensions (i.e. location, level, and nature) using uncertainty typology. In our study, we argue that uncertainties need to be identified, assessed, reported and interpreted in order for assessment results to adequately support decision making, such as the establishment of air quality standards based on health burden of air quality.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.466-473
• /
• 2017

RC (Reinforced Concrete) member has varying service life due to varying diffusion characteristics with loading conditions even if it is exposed to constant exterior conditions. In the paper, quantitative parameters are obtained through adopting the previous results for effects of compressive, tensile, and cold joint on chloride diffusion in OPC (Ordinary Portland Cement) and GGBFS (Ground Granulated Blast Furnace Slag) concrete. Service life is evaluated in RC simple beam with 10.0m of span through increasing loading from self weight (2.5kN/m) to the loading to cracking moment (5.5kN/m). In OPC concrete without cold joint, service life changes to 89.4% for tensile region and 101% for compressive region with loadings while GGBFS concrete has 80.0% and 106%, respectively. For cold joint area, GGBFS concrete shows much reduced service life to 82~80% in compressive region and 69~61% in tensile region, which is caused by the lower diffusion in normal condition but relatively higher increasing cold joint effect than OPC concrete.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.439-445
• /
• 2021

Low-cost, ultra-high-speed cameras, made possible by the development of image sensors and small displays, can be very useful in image processing and pattern recognition. This paper introduces an algorithm that corrects irregular lighting from a high-speed image that is continuously input with a slight time interval, and which then obtains an exposed skin color region that is the area of interest in a person from the corrected image. In this study, the non-uniform lighting effect from a received high-speed image is first corrected using a frame blending technique. Then, the region of interest is robustly obtained from the input high-speed color image by applying an elliptical skin color distribution model generated from iterative learning in advance. Experimental results show that the approach presented in this paper corrects illumination in various types of color images, and then accurately acquires the region of interest. The algorithm proposed in this study is expected to be useful in various types of practical applications related to image recognition, such as face recognition and tracking, lighting correction, and video indexing and retrieval.

• Geomechanics and Engineering
• /
• v.35 no.6
• /
• pp.581-591
• /
• 2023

North Anatolian Fault Zone is tectonically active with recent earthquakes (Mw7.6 1999-Kocaeli and Mw7.2 1999-Düzce earthquakes) and it passes through Marmara region, which is highly industrialized, densely populated and economically important part of Turkey. Many power plants, located in Marmara region, are exposed to high seismic hazard. In this study, open source OpenQuake software has been used for the probabilistic earthquake hazard analysis of Marmara region and risk assessment for the specified energy facility. The SHARE project seismic zonation model has been used in the analysis with the regional sources, NGA GMPEs and site model logic trees. The earthquake hazard results have been compared with the former and existing earthquake resistant design regulations in Turkey, TSC 2007 and TBSCD 2018. In the scope of the study, the seismic hazard assessment for a typical natural gas combined cycle power plant located in Marmara region has been achieved. The seismic risk assessment has been accomplished for a typical control building located in the power plant using obtained seismic hazard results. The structural and non-structural fragility functions and a consequence model have been used in the seismic risk assessment. Based on the seismic hazard level with a 2% probability of exceedance in 50 years, considered for especially these type of critical structures, the ratios of structural and non-structural loss to the total building cost were obtained as 8.8% and 45.7%, respectively. The results of the study enable the practical seismic risk assessment of the critical facility located on different regions.

• Journal of Periodontal and Implant Science
• /
• v.42 no.3
• /
• pp.105-109
• /
• 2012

Purpose: Soft tissue recessions frequently cause esthetic disharmony and dissatisfaction. Compared with soft tissue coverage around a tooth, the coverage of an implant site is obviously unpredictable. Particularly in the cases of thin mucosa, a significant greater amount of recession takes place compared to thick mucosa. To overcome this problem, this case report demonstrates a two-step mucosal dehiscence coverage technique for an endosseous implant. Methods: A 33-year-old female visited us with the chief complaint of dissatisfaction with the esthetics of an exposed implant in the maxillary left cental incisor region. A partial-thickness pouch was constructed around the dehiscence. A subepithelial connective tissue graft was positioned in the apical site of the implant and covered by a mucosal flap with normal tension. At 12 months after surgery, the recipient site was partially covered by keratinized mucosa. However, the buccal interdental papilla between implant on maxillary left central incisor region and adjacent lateral incisor was concave in shape. To resolve the mucosal recession after the first graft, a second graft was performed with the same technique. Results: An esthetically satisfactory result was achieved and the marginal soft tissue level was stable 9 months after the second graft. Conclusions: The second graft was able to resolve the mucosal recession after first graft. This two-step approach has the potential to improve the certainty of esthetic results.

• Journal of ILASS-Korea
• /
• v.20 no.2
• /
• pp.107-113
• /
• 2015

To date, the demand for Combined Cycle Power Plant (CCPP) has been continuously increased to overcome the problem of air pollution and lack of energy. In particular, the underground CCPP is exposed to substantial fire and explosion risks induced by gas leakage. The present study conducted numerical simulations to examine the fire behavior and gas leakage characteristics for a restricted region including gas turbine and other components used in a typical CCPP system. The commercial code of FLUENT V.14 was used for simulation. From the results, it was found that flammable limit distribution of leakage gas affects fire behavior. Especially, the flame is propagated in an instant in restricted region with LNG gas. In addition, consequence analysis factors such as critical temperature and radiation heat flux are introduced. These results would be useful in making the safety guidelines for the underground CCPP.

• Korean Journal of Community Nutrition
• /
• v.14 no.4
• /
• pp.406-419
• /
• 2009

This research has been surveyed on street food and snack intake status of elementary school students in the Jeon Buk region and the recognition of mothers has been observed for the objective of providing base materials for appropriate eating habits and nutritional education. As for status on intake of street food, most students (97.3%) have shown to have eaten from the street vendors while mothers assume low frequency in their child's intake of street food. Favorite street food choices had an agreement between mother and student as ddukbokki and dakkochi. Students were more tolerant in sanitation and necessity of street food than the mothers. This research shows that there is a difference in the recognition of street food between the students and their mothers. There a need required for improvement in the system as to provide quality food and to prevent poor quality food being exposed to the students. Furthermore, practical and appropriate education must be conducted at home and at school for better choices of food and a better lifestyle. (Korean J Community Nutrition 14(4) : 406${\sim}$419, 2009)

• KSBB Journal
• /
• v.24 no.6
• /
• pp.515-520
• /
• 2009

This study presented facile method of cell patterning using fabricated PDMS patterns on polyelectrolyte coated surface. This basic principle is the fabrication of functional surface presenting two orthogonal surfaces such as cell adhesive and repellent properties. Cell adhesive surface was firstly fabricated with simple coating of polyelectrolyte multilayer. And then, the desired patterns of PDMS for the prevention of nonspecific binding of cells were transferred onto the previously formed thin film of polyelectrolyte multilayer. Thus, we could prepare novel functional surface simultaneously containing PDMS and polyelectrolyte region. As expected, the PDMS regions showed effective prevention of nonspecific binding of cell and the other region, exposed polyelectrolyte area, provided cell adhesive environment. The height of formed PDMS structure was about 100 nm. Based on this method, cell patterning can be successfully obtained with various pattern shapes and sizes. Therefore, we expect that this simple method will be useful platform technology for the development of cell chip, cell based assay system, and biochip.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04b
• /
• pp.10-13
• /
• 2000

The notching effect in etching of un doped amorphous silicon gate had different characteristics and mechanism comparing with reported ones. The undoped amorphous silicon was etched by using HBr gas plasma, First, in the region of small line width, the potential was increased as a result of ions in the exposed surface of oxide, and the incident ions between the small line width were deflected more wide range, therefore the depth of notching was shallow and wide, Second, in the region of large line width of gate, electrons were charged on the top of photoresist and the side of gate, a part of ions deflected, The deflected ions were locally charged positive on the side of gate, and then the potential difference was produced, therefore, ions stored up more at independent line than at dense line, and nothing became deeper by Br ion bombardment.