• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.896-905
• /
• 1993

Thin-layers of wheat and barley are dried at near-ambient temperatures(3.5$^{\circ}C$ -5$0^{\circ}C$) in order to obtain the intrinsic drying data. The well established apparatus was modified to enable it to record all the sample weight data in still air by using a purpose -built automatically controlled sliding valve. The air could be diverted in less than 0.5seconds and a 7 second period was required to attain a steady weight reading. With this apparatus, very smooth drying curves were obtained. The data of sample weight , drying temperature and dew point temperature wee recorded continuously . The drying process was terminated when the moisture content change in 24 hours was less than 0.004 d.b. This was achieved by drying a sample for about a week . The final points were recorded as the dynamic equilibrium moisture content(EMC). The drying data were than fitted to the exponential Newton model and the dynamic EMC data were fitted to the Modified-Chung-Pfost Model . All the fitted parameters are given and comparison is made with previous published data. The comparisons who that the current drying constants are lower than the previous data, the dynamic EMC data obtained for wheat and barely agree with the previous data. The results show that to obtain the drying constant in the exponential Newton model, adequate drying time is necessary.

• 한국농공학회논문집
• /
• 제62권1호
• /
• pp.95-104
• /
• 2020

The purpose of this study is to develop a pipe type soil sampler that can easily collect soil cross section servey and soil samples to conduct ecological environment surveys while minimizing ecological disturbance in the area subject to soil survey. Furthermore, this study develop the exponential type estimation specific weight formula (ESWF) that uses pipe type soil sampler to easily carry out soil cross section survey and soil sample while estimating the specific weight of the area using water content and soil sample length variation ratio (SLVRs) and to obtain apparent specific gravity, hardness, and max. porosity which are used as growth of corps and ecological environment index. The calibration results of ESWF showed a high degree of significance, with NSE for actual specific weight (γ₀) and calibration estimation specific weight (γ_ec) 0.95, R² for 0.954, and RMSE for 0.051. The verification results of ESWF showed a high significance, with NSE for actual specific weight (γ₀) and verification estimation specific weight (γ_ev) 0.881, R² for 0.978, and RMSE for 0.055.

• East Asian mathematical journal
• /
• 제33권1호
• /
• pp.37-44
• /
• 2017

We will prove size estimates of the Bergman kernel for the generalized Fock space ${\mathcal{F}}^2_{\varphi}$, where ${\varphi}$ belongs to the class $\mathcal{W} $. The main tool for the proof is to use the estimate on the canonical solution to the ${\bar{\partial}}$-equation. We use Delin's weighted $L^2$-estimate ([3], [6]) for it.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.583-590
• /
• 2002

Point collocation method based on the fast derivatives approximation of meshfree shape function is applied to solid mechanics in this study. Enhanced meshfree approximation with approximated derivative of shape function is reviewed, and formulation of linear elastic solid mechanics by point collocation method is presented. It implies that governing equation of solid mechanics with strong form is directly formulated without no numerical integration cells or grid. The regularity of weight function is not required due to a use of approximated derivative, so we propose the exponential type weight function that is discontinuous in first derivative. The convergence and stability of the proposed method is verified by passing the generalized patch test. Also, the efficiency and applicability of the proposed method in solid mechanics is verified by solving types of solid problems. Numerical results show that not only a use of proposed weight function leads lower error and higher convergence rate than that of the conventional weight functions, but also the improved collocation method with derivative approximation enables to compute the derivatives of shape function very fast and accurately enough to replace the classical direct derivative calculation.

• 한국국방경영분석학회지
• /
• 제3권1호
• /
• pp.83-96
• /
• 1977

The combustion chamber and nozzle of an end burning, small spherical rocket is designed. A spherical external shape has a number of advantages such as fixed center-of-gravity and minimum aerodynamic precession torques during flight and a better mass distribution for gyro-stabilization as contrasted to a conventional ogive rocket shape. It is shown that the cross-sectional variation of the end burning solid propellant with length is an exponential geometry to provide a constant thrust-weight ratio of the rocket device during the propellant burning period, and that the factors which affect the attainment of the constant relationship of thrust to weight in the design are the initial propellant area, initial weight of the rocket and propellant density. The measurement of the transient thrust in the ground static test using black powder propellant supports the predicted results. A wind tunnel having a $30{\times}30{\times}75cm$ test section and Mach number 0.11 is constructed, and a simple balance-type device is designed for the measurement of the drag of a spinning sphere. The experimental results indicate that the. spinning has no effect on the magnitude of the drag up to the Reynolds number $3{\times}10^5$. Numerical computation of the flight trajectories for various launching angles is presented, and the gyro-stabilization of spinning sphere is discussed.

• 마이크로전자및패키징학회지
• /
• 제24권1호
• /
• pp.67-73
• /
• 2017

열중량 분석(Thermogravimetry)을 이용하여 열화시간 경과에 따른 접착 소재의 열에 대한 열화 특성을 분석하였다. 실험에는 여섯 가지의 온도 승온률에서 측정된 데이터를 이용하여 열화에 따른 동적 반응을 분석하였다. 이 데이터를 바탕으로 아레니우스 방정식을 이용하여 활성 에너지와 비례 상수 등 모델에 필요한 계수를 계산하였다. 또한 열화거동을 예측하는 방정식으로는 무게 감소에 따른 간단한 n차 방정식을 이용하였다. 구해진 예측 모델은 실험 데이터와 비교하여 검증하였다. 계산 결과 각 승온률에 따라 활성화 에너지의 크기가 다름에 따라 평균값을 사용하여 계산한 결과는 낮은 승온률인 경우에는 잘 예측하였지만 높은 승온률인 경우에는 측정값과 차이를 보였다. 이와 같은 문제를 해결하기 위해 지수함수 급수를 이용한 새로운 모델링 방법이 처음 시도되었으며 예측된 결과는 승온률에 관계없이 실험 데이터와 잘 일치하였다.

• 한국축산식품학회지
• /
• 제28권2호
• /
• pp.187-195
• /
• 2008

The purpose of this study was to establish proper shipping weight and backfat thickness by applying the growth model to backfat thickness, measured by means of not only body weight, but also ultrasonography, and predicting the changes by age. Three breeds, i.e. Duroc, Landrace, and Yorkshie, were analyzed, and the Gompertz, logistic, and Von Bertalanffy model were used for inference with the parameter of the growth model being sex. As a result, both body weight and backfat thickness showed different growth curve parameters and characteristics at inflection points depending on model selection and sex. As for backfat thickness, in estimating the inflection point, unlike the case of body weight, the inflection ages of the boars of the Duroc breed was earlier than that of sows, whereas the inflection ages of the sows of the Landrace and Yorkshire breeds was earlier than that of boars. More than anything else, in the analysis of the changes in backfat thickness according to body weight, as the body weight reached 145kg, the backfat thickness showed much variation as great as 1.7-3.2 cm in each breed and sex. In addition, unlike the other breeds, the boars of the Landrace breed showed an exponential type of relationship between body weight and backfat thickness. As they grow to become 100 kg or heavier, abrupt change in back fat thickness was confirmed. If the growth of body weight and backfat thickness is understood and the genetic relationship is taken advantage of like this, it would be possible to set desired body weight and backfat thickness, and thus help effectively set the shipping time. If not only the phenotype, but also genetic parameters about growth characteristics are estimated and analyzed additionally, more effective data can be generated.

• 한국농공학회지
• /
• 제26권2호
• /
• pp.59-68
• /
• 1984

The Purpose of this study was to investigate the effect of the change in misture content on some physical properties of grains, and some relations amont the properties. Materials included ere rough rice, brown rice, barley and wheat with the range of moisture content of 6~26 percent, 7~25 percent, 10~24 percent and 6~22 percent, respectively. Kernel dimension, sphericity, kernel weight, and volume were included as the physical properties of the grains. The results obtained are summarized as follows; 1. The ratio of grain length to the thickness was in the range of 3.59~4.16 for rough rice(Indica type), 2.98~3.27 for rough rice(Japonica type), 3.25 for brown rice (I.T.), 2.14~2.38 for brown rice(J.T.), 2.92~3.13 for barley and 2.10~2.21 for wheat, respectively. 2. The sphericity was found to be 42 percent for rough rice(I.T.), 48 percent for rough rice(J.T.), 52 percent for brown rice(I.T.), 62 percent for brown rice(J.T.), 45 percent for barley and 61 percent for wheat, respectively. 3. The kernel weight of grains was linealy increased with the increase of moisture content. At a specified moisture centent of 14 percent, the kernel weight was shown to be in the range of 4.72${\times}10^{-5}$~3.58${\times}10^{-5}$kg for wheat, 3.60${\times}10^{-5}$~3.12${\times}10^{-5}$kg for barley, 2.80${\times}10^{-5}$~2.35${\times}10^{-5}$kg for rough rice, and 2.24${\times}10^{-5}$~1.82${\times}10^{-5}$kg for brown rice, respectively. 4. The kernel volume was linearly increased with increase of moisture content. The rate of increase was significantly low for rough rice in comparison with the remaining grains. The kernel volume, at a specified moisture content of 14 percent, was in the range of 3.51${\times}10^{-8}$~2.76${\times}10^{-8}m^3$ for wheat, 2.84${\times}10^{-8}$~2.43${\times}10^{-8}m^3$ for barley, 2.93${\times}10^{-8}$~1.97${\times}10^{-8}m^3$ for rough rice, and 1.61${\times}10^{-8}$~1.29${\times}10^{-8}m^3$ for brown rice, respectively. 5. The kernel volume of grains was found to be related to the length, width, thickness and kernel weight as a exponential function. The kernel volume was shown to have correlation coefficient to the length factor rough rice and barley which were of low sphericity, while the width factor was predominant for brown rice and wheat which was of high sphericity.

• 산업경영시스템학회지
• /
• 제41권1호
• /
• pp.50-58
• /
• 2018

Intermittent demand is a demand with a pattern in which zero demands occur frequently and non-zero demands occur sporadically. This type of demand mainly appears in spare parts with very low demand. Croston's method, which is an initiative intermittent demand forecasting method, estimates the average demand by separately estimating the size of non-zero demands and the interval between non-zero demands. Such smoothing type of forecasting methods can be suitable for mid-term or long-term demand forecasting because those provides the same demand forecasts during the forecasting horizon. However, the smoothing type of forecasting methods aims at short-term forecasting, so the estimated average forecast is a factor to decrease accuracy. In this paper, we propose a forecasting method to improve short-term accuracy by improving Croston's method for intermittent demand forecasting. The proposed forecasting method estimates both the non-zero demand size and the zero demands' interval separately, as in Croston's method, but the forecast at a future period adjusted by binomial weight according to occurrence probability. This serves to improve the accuracy of short-term forecasts. In this paper, we first prove the unbiasedness of the proposed method as an important attribute in forecasting. The performance of the proposed method is compared with those of five existing forecasting methods via eight evaluation criteria. The simulation results show that the proposed forecasting method is superior to other methods in terms of all evaluation criteria in short-term forecasting regardless of average size and dispersion parameter of demands. However, the larger the average demand size and dispersion are, that is, the closer to continuous demand, the less the performance gap with other forecasting methods.

• 산업경영시스템학회지
• /
• 제40권3호
• /
• pp.138-147
• /
• 2017

As the functions and structure of the system are complicated and elaborated, various types of structures are emerging to increase reliability in order to cope with a system requiring higher reliability. Among these, standby systems with standby components for each major component are mainly used in aircraft or power plants requiring high reliability. In this study, we consider a standby system with a multi-functional standby component in which one standby component simultaneously performs the functions of several major components. The structure of a parallel system with multifunctional standby components can also be seen in real aircraft hydraulic pump systems and is very efficient in terms of weight, space, and cost as compared to a basic standby system. All components of the system have complete operation, complete failure, only two states, and the system has multiple states depending on the state of the component. At this time, the multi-functional standby component is assumed to be in a non-operating standby state (Cold Standby) when the main component fails. In addition, the failure rate of each part follows the Weibull distribution which can be expressed as increasing type, constant type, and decreasing type according to the shape parameter. If the Weibull distribution is used, it can be applied to various environments in a realistic manner compared to the exponential distribution that can be reflected only when the failure rate is constant. In this paper, Markov chain analysis method is applied to evaluate the reliability of multi-functional multi-state standby system. In order to verify the validity of the reliability, a graph was generated by applying arbitrary shape parameters and scale parameter values through Excel. In order to analyze the effect of multi-functional multi-state standby system using Weibull distribution, we compared the reliability based on the most basic parallel system and the standby system.