• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(1)
• /
• pp.271-274
• /
• 2000

In this paper, the distortion of an electrical pulse with rise/fall time resulting from dispersion and reflection as it propagates along a tapered microstrip line is investigated, and the delay time and distortion rate with respect to input and load impedances are analyzed on triangular and exponential tapered lines and analyzed the influence of the reflection and frequency dispersion on the distorted voltage wave in the tapered lines. The observed overshoot in front of the distorted wave is caused due to the frequency dispersion and the sustained tail of that comes from the reflection in the tapered line.

• 전자공학회논문지D
• /
• 제36D권8호
• /
• pp.1-6
• /
• 1999

MCM 또는 MIC등에서 광대역 임피던스 정합을 위해 데이퍼 선로를 이용할 때 주파수 영역의 전송 특성만을 고려하는 경항이 있다. 본 논문에서는 테이퍼형 비균일 전송선로에서 디지털 펄스가 전송될 때 시간 영역에서 분산과 반사에 의해 나타나는 신호의 왜곡 특성을 해석하였다. 삼각형과 지수분포형 테이퍼에서 입력과 부하임피던스의 비에 따라 상승/하강 시간을 갖는 펄스를 입력 했을 때 지연과 왜곡 특성을 비교하였다. 위상 정수의 분산 모델은 정확도가 우수한 Kirchning-Jansen의 것을 사용하였으며, 삼각형 테이퍼가 지수형 테이퍼에 비해 시간 지연 특성은 좋게 나타났으나 왜곡이 심하게 나타났다. 시간 영역에서 펄스의 반사 신호의 진폭을 계산하여 나타내었다.

• Advances in aircraft and spacecraft science
• /
• 제10권1호
• /
• pp.19-49
• /
• 2023

The present study proposes a theoretical and numerical investigation on the dynamic response behaviour of a functional graded (FG) ceramic-metal tapered rotor shaft system, by the differential quadrature finite elements method (DQFEM) to identify the natural frequencies for modelling and analysis of the structure with suitable validations. The purpose of this paper is to explore the influence of heat gradients on the natural frequency of rotation of FG shafts via three-dimensional solid elements, as well as a theoretical examination using the Timoshenko beam mode, which took into account the gyroscopic effect and rotational inertia. The functionally graded material's distribution is described by two distribution laws: the power law and the exponential law. To simulate varied thermal conditions, radial temperature distributions are obtained using the nonlinear temperature distribution (NLTD) and exponential temperature distribution (ETD) approaches. This work deals with the results of the effect on the fundamental frequencies of different material's laws gradation and temperature gradients distributions. Attempts are conducted to identify adequate explanations for the behaviours based on material characteristics. The effect of taper angle and material distribution on the dynamic behaviour of the FG conical rotor system is discussed.

• 대한전자공학회논문지TC
• /
• 제37권8호
• /
• pp.45-51
• /
• 2000

본 논문에서는 지수형, 삼각형 및 체비쉐브 테이퍼 전송선로에서 디지털 펄스가 전송될 때 분산과 반사에 의해 나타나는 펄스의 왜곡 특성을 시간영역에서 해석하여 그 전송특성을 비교하여 나타내었다. 그리고 테이퍼 선로에서 전압과 전류의 전달함수를 구하여 상승과 하강 시간을 갖는 비이상형 구형 펄스를 입력했을 때 왜곡 특성을 해석하고, 선로에서 나타나는 분산과 반사가 파형의 왜곡에 미치는 영향을 분석하였다. 주파수 분산에 의한 왜곡은 파형에 오버슈트와 기울림이 나타났고, 반사에 의한 왜곡은 꼬리 부분에 잔류 특성이 나타났다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.217-220
• /
• 2005

In this paper describes novel m antenna using aperture matched type slot structure. It substitutes edge diffractions by curved-surface diffractions which have a tendency to provide an undisturbed energy flow across the junction, around the curved surface, and into free-space. The proposed antenna is composed of a CPW feed structure, exponential tapered slot and the curved sectional at the edge. experimental resulte show that aperture matched type slot improve the performance of the UWB antenna.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.25-28
• /
• 2001

The problem considered is the buckling of a rectangular orthotropic plate, tapered in thickness in a direction parallel to two sides and compressed in that direction. Curves are presented showing the variation of buckling stress coefficient with the special loads. The type of thickness variation is exponential. While this paper is presented how to design for an efficient orthotropic plate taper from physical consideration.

• 전기학회논문지P
• /
• 제66권3호
• /
• pp.105-109
• /
• 2017

In this paper is proposed wide band reconfiguration antenna by using PIN diode. The proposed antenna consisted of elliptical dipole and exponential taper balun. The proposed new matching method was exponential tapered balun in this paper. The research paper comprised of two PIN diode and Elliptical dipole. This paper used CPW to CPS feed. We obtained a good band width characteristics result by simulating. This antenna is designed to apply ISM and WiFi band.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.984-987
• /
• 2003

This paper discusses the lateral vibration of a bar which has its tip free. The uniform bar has a solution by summation of some simple exponential functions. But if its shape is not uniform, its solution could be by Bessel's function, or mathematical solution could not be existed. Even if the solution of Bessel's function exists. as Bessel function is a series function, we must get the solution by numerical method, Hereof the author proposes the solution of the matrix method by Ritz's method, and proposes a new deflection shape

• Structural Engineering and Mechanics
• /
• 제66권6호
• /
• pp.737-748
• /
• 2018

The current study presents a new technique in the framework of the nonlocal elasticity theory for a comprehensive buckling analysis of Euler-Bernoulli nano-beams made up of bidirectional functionally graded material (BDFGM). The mechanical properties are considered by exponential and arbitrary variations for axial and transverse directions, respectively. The various circumstances including tapering, resting on two-parameter elastic foundation, step-wise or continuous variations of axial loading, various shapes of sections with various distribution laws of mechanical properties and various boundary conditions like the multi-span beams are taken into account. As far as we know, for the first time in the current work, the buckling analyses of BDFGM nano-beams are carried out under mentioned circumstances. The critical buckling loads and mode shapes are calculated by using energy method and a new technique based on calculus of variations and collocation method. Fast convergence and excellent agreement with the known data in literature, wherever possible, presents the efficiency of proposed technique. The effects of boundary conditions, material and taper constants, foundation moduli, variable axial compression and small-scale of nano-beam on the buckling loads and mode shapes are investigated. Moreover the analytical solutions, for the simpler cases are provided in appendices.

• 한국소음진동공학회논문집
• /
• 제17권10호
• /
• pp.946-949
• /
• 2007

This paper discusses the lateral vibration of a beam with boundary condition of one end fixed and the other end free. The uniform beam has a solution by summation of some simple exponential functions. But if its shape is not uniform, its solution could be by Bessel's function or mathematical solution could not exist. Even if the solution of Bessel's function exists, as Bessel function is a series function, we must get the solution by numerical method. Author had proposed the solution of the matrix method by Ritz's method and a new mode shape function, and had earned the good results for a wedge beam. Hereby a vibration analysis for the tapered beam with circle cross section was executed, and so good results were showed.