• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1851-1854
• /
• 2002

The Internet with conventional routing scheme cannot meet user demands driven from drastic growth in the Internet user and various service and traffic type. MPLS(Multi Protocol Label Switching) was introduced to the Internet fur solution to resolve this problem. MPLS is a paradigm to integrate higher layer’s software routing functions including layer-3 routing with layer-2 switching. But, the exponential growth of Internet traffic brings out of label space. One scalable solution to cope with this problem is to introduce flow merge technique, i. e. a group of flows is forwarded using the same label. Specially, IETF(Internet Engineering Task Force) recommends that ATM based MPLS system may include VC merge function, so it is scalable to increase of internet traffic. We implemented the MPLS LER system that includes the look-up and forwarding function in incoming path and VC merging function and limited traffic management function in outgoing path. This paper describes the implementation of the LER’s outgoing parts.

• 전기의세계
• /
• 제29권10호
• /
• pp.667-677
• /
• 1980

A new approach for optimal decentralized load-frequency control in a multi-area interconnected power system is presented, which includes the optimal determination of decentralized load-frequency controller, observer for unmeasurable local states and load disturbances, quadratic estimator for tie-line power flow information transmitted at intervals. The optimal design of the decentralized controller is based on a modified application of the singular perturbation theory, and the decentralized Luenberger obeserver uses techniques of state augmentation for exponential disturbance functions and the representation of tie-line power flow states as non-directly-controlled inputs. The approach presented herein is numerically tested through Elgerd's two-area load-frequency system model, and the results demonstrate remarkable advantages over the conventional ones.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.429-436
• /
• 2003

A new linkage framework between elastic shell element with finite rotation and computar-aided geometric design (CAGD) (or surface is developed in the present study. The framework of shell finite element is based on the generalized curved two-parametric coordinate system. To represent free-form surface, cubic B-spline tensor-product functions are used. Thus the present finite element can be directly linked into the geometric modeling produced by surface generation tool in CAD software. The efficiency and accuracy of the Previously developed linear elements hold for the nonlinear element with finite rotations. To handle the finite rotation behavior of shells, exponential mapping in the SO(3) group is employed to allow the large incremental step size. The integrated frameworks of shell geometric design and nonlinear computational analysis can serve as an efficient tool in shape and topological design of surfaces with large deformations.

• 수산경영론집
• /
• 제30권2호
• /
• pp.25-37
• /
• 1999

Some multi echelon inventory systems carry perishable products. The value of these product reduces as the period of time they spend in the system. In this paper We derive the necessary condition to determine optimal quantity, service level for a perishable product. The systems considered consist of two echelons and carry single item. To determine the optimal order quantity, the demand is assumed to be constant, the holding costs may be different in the echelons, and it allows no shortages. I assumed the price of product decreases by negative exponential function. To determine service level, following assumptions used in the model ㆍlead time is constant. ㆍdemand is normal distribution. ㆍthe product starts to perish at the second echelon. Service level is computed for different levels of lead times and for different variance of demands and for different price functions. The experimental results indicate that the service level in cost is a function of service level in demand and perishability of product. Results of the models exhibit that perishability and the age of the product are critical to determine the lot sizing and service level.

• Smart Structures and Systems
• /
• 제26권3호
• /
• pp.361-371
• /
• 2020

Exact solution for nonlinear behavior of clamped-clamped functionally graded (FG) buckled beams is presented. The effective material properties are considered to vary along the thickness direction according to exponential-law form. The in-plane inertia and damping are neglected, and hence the governing equations are reduced to a single nonlinear fourth-order partial-integral-differential equation. The von Kármán geometric nonlinearity has been considered in the formulation. Galerkin procedure is used to obtain a second order nonlinear ordinary equation with quadratic and cubic nonlinear terms. Based on the mode of the corresponding linear problem, which readily satisfy the boundary conditions, the frequencies for the nonlinear problem are obtained using the Jacobi elliptic functions. The effects of various parameters such as the Young's modulus ratio, the beam slenderness ratio, the vibration amplitude and the magnitude of axial load on the nonlinear behavior are examined.

• Structural Engineering and Mechanics
• /
• 제11권4호
• /
• pp.461-468
• /
• 2001

The aim of this work is to establish the coefficient that defines the critical buckling load for isotropic annular plates of variable thickness whose outer boundary is simply supported and subjected to uniform pressure. It is assumed that the plate thickness varies in a continuous way, according to an exponential law. The eigenvalues are determined using an optimized Rayleigh-Ritz method with polynomial coordinate functions which identically satisfy the boundary conditions at the outer edge. Good engineering agreement is shown to exist between the obtained results and buckling parameters presented in the technical literature.

• Water Engineering Research
• /
• 제2권1호
• /
• pp.1-10
• /
• 2001

The frequency analyses for the precipitation data in Korea were performed. We used daily maximum series, monthly maximum series, and annual series. For nonparametric frequency analyses, variable kernel estimators were used. Nonparametric methods do not require assumptions about the underlying populations from which the data are obtained. Therefore, they are better suited for multimodal distributions with the advantage of not requiring a distributional assumption. In order to compare their performance with parametric distributions, we considered several probability density functions. They are Gamma, Gumbel, Log-normal, Log-Pearson type III, Exponential, Generalized logistic, Generalized Pareto, and Wakeby distributions. The variable kernel estimates are comparable and are in the middle of the range of the parametric estimates. The variable kernel estimates show a very small probability in extrapolation beyond the largest observed data in the sample. However, the log-variable kernel estimates remedied these defects with the log-transformed data.

• 전기의세계
• /
• 제21권5호
• /
• pp.7-12
• /
• 1972

Applying the theory of physiology and control systems, the visual system was studied as a regulator of impining light. The characteristics function of visual system is mainly analysed by spato-temporal characteristics based upon Enroth's model, Broca-Sulzer phenomenon and Mach effect. Some aims of this paper are as follows. (1) In order to get the excitatory and inhibitory potential of the intermediated cell layer in the retina, the exponential value, {exp(FM/kT)- $I_{mn}$ } is caculated based on the physiological theory in neuro-phenomena. (2) To show the visual characteristics by analog simulation for generating stimulus waveforms and analysis, the visual adaptation was recorded as electrical stimulation in the form of step functions. Furthermore, ti is shown that the above experimental data agrees satisfactorily with the theoretical (psychophysiological) values. This study is expected to lead to further studies concerned with human observer and human operator in control and especially pattern recognition systems.stems.

• Journal of electromagnetic engineering and science
• /
• 제15권1호
• /
• pp.44-52
• /
• 2015

A worst-case estimate of an envelope correlation coefficient (ECC) is obtained for small multiple-input multiple-output (MIMO) mobile antennas operating below 1 GHz. The worst-case estimate is numerically derived in this paper using spherical and exponential wave functions. The derived result confirms that the worst-case ECC can be easily obtained from the rotation angle between the radiation patterns of two MIMO elements, which are attained directly from the amplitude of 2D electric field patterns without any additional phase and polarization information. As a practical example, MIMO mobile antennas with different antenna element arrangements are compared to verify the validity of the proposed worst-case estimate. Moreover, based on these analyses, we also suggest an effective approach to reduce the ECC of a small MIMO mobile antenna operating below 1 GHz by properly locating the antenna elements to make the radiation patterns perpendicular to each other.

• Structural Engineering and Mechanics
• /
• 제45권2호
• /
• pp.259-275
• /
• 2013

Free vibration of symmetric angle-ply layered conical shell frusta of variable thickness is analyzed under shear deformation theory with different boundary conditions by applying collocation with spline approximation. Linear and exponential variation in thickness of layers are assumed in axial direction. Displacements and rotational functions are approximated by Bickley-type splines of order three and obtained a generalized eigenvalue problem. This problem is solved numerically for an eigenfrequency parameter and an associated eigenvector of spline coefficients. The vibration of three and five-layered conical shells, made up of two different type of materials are considered. Parametric studies are made for analysing the frequencies of the shell with respect to the coefficients of thickness variations, length-to-radius ratio, length-to-thickness ratio and ply angles with different combination of the materials. The results are compared with the available data and new results are presented in terms of tables and graphs.