• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권5호
• /
• pp.199-204
• /
• 2006

To develop a safety-critical network in nuclear power plants that puts more stringent requirements than the competitive commercial ones do, we establish four design criteria - deterministic communication, explicit separation/isolation structure, reliability, verification & validation. According to those design criteria, the fundamental design elements are chosen as follows - a star topology, point-to-point physical link, connection-oriented link control and fixed allocation access control. After analyzing the design elements, we also build a communication architecture with TDM (Time Division Multiplexing) bus switching scheme. Finally, We develop a DDCNet (Deterministic Data Communication Network) based on the established architecture. The DDCNet is composed of 64 nodes and guarantees the transmission bandwidth of 10Mbps and the delay of 10 msec for each node. It turns out that the DDCNet satisfies the aforementioned design criteria and can be adequately utilized for our purpose.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.289-292
• /
• 2008

Highly over-expanded nozzle of the rocket engines will be excited by non-axial forces due to flow separation at sea level operations. Since rocket engines are designed to produce axial thrust to power the vehicle, non-axial static and/or dynamic forces are not desirable. Several engine failures were attributed to the side loads. Present work investigate the unsteady flow in an over-expanded rocket nozzle in order to estimate side load during a shutdown/starting. Numerical computations has been carried out with density based solver on multi-block structured grid. Present solver is explicit in time and unsteady time step is calculated using dual time step approach. AUSMDV is considered as a numerical scheme for the flux calculations. One equation Spalart-Allmaras turbulence model is selected. Results presented here is for two nozzle pressure ratio i.e. 100 and 20. At 100 NPR, restricted shock separation (RSS) pattern is observed while, 20 NPR shows free shock separation (FSS) pattern. Side load is observed during the transition of separation pattern at different NPR.

• 한국유체기계학회 논문집
• /
• 제3권3호
• /
• pp.7-11
• /
• 2000

A numerical study based on the three-dimensional thin-layer Navier-Stokes solver is carried out to analyze the flowfield through a single stage transonic compressor. Explicit fout-step Runge-Kutta scheme with spatially variable time step and implicit residual smoothing is used. The governing equations we discretized with explcit finite difference method. Mired-out average method is used at the interface between rotor and stator. And, an artificial dissipation model is used to assure the stability of solution. The results with k-w turbulence model were compared to the results with Baldwin-Lomax model, and physical phenomena of transonic compressor are presented. The two turbulence models give the results that show reasonably good agreements with experimental data.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 추계 학술대회논문집
• /
• pp.197-203
• /
• 1998

The discrete element method is a numerical model capable of describing the mechanical behaviour of assemblies of discs and spheres. The method is based on the use of an explicit numerical scheme in which the interaction of the particles is monitored contact by contact and the motion of the particles modelled particle by particle. In this paper, A two-dimensional model for computing contacts and motions of granular particles of unform, inelasticity is presented. And, code is developed. The primary aim of this paper is to approv computational result of continuum alaysis which is on processing. The end of this paper, that code is tested with several examples.

• 대한토목학회논문집
• /
• 제9권1호
• /
• pp.41-52
• /
• 1989

ADI 방법, Hansen 방법, Heaps 방법, Richtmyer 방법, MacCormack 방법 등 5가지 유한차분방법을 사용하여 천수방정식에 대한 수치실험을 행하였다. 해석적 해가 존재하는 선형모형에 적용하여 안정성, CPU시간, 정확성 등을 검토하였고 비선형모형에 적용하여 순환현상을 모의하였다. 그 결과 ADI방법은 CPU시간이 가장 길고 유속에 대한 정확성이 다소 떨어진다는 결점이 있는 반면 순환현상을 가장 잘 모의한다는 것과 안정성에서 큰 장점이 있었다. 양해법 중에선 Richtmyer 방법이 비교적 우수한 방법으로 평가되었다. 한편 유효점성항은 천수방정식의 수치해석시 필수적이라는 결론도 얻었다.

• 대한기계학회논문집
• /
• 제19권5호
• /
• pp.1280-1290
• /
• 1995

In order to investigate the compression wave propagating in a high-speed railway tunnel, a numerical calculation was applied to the wave phenomenon occurring in a model tunnel. Unsteady, one-dimensional inviscid or viscous flows were solved by an explicit TVD scheme, and the calculated flows were compared with the results of measurement in real tunnels. Tunnel noises caused by emission of the compression wave were characterized in terms of excess pressure of compression wave, pressure gradient in the wave front and width of the compression wave. Calculated attenuation, pressure gradient and width of compression wave with the propagating distance agreed with the results of measurement in the real tunnels. The results also show that tunnel noises are proportional to the train velocity entering the tunnel.

• Structural Engineering and Mechanics
• /
• 제60권1호
• /
• pp.149-162
• /
• 2016

Structure-dependent integration methods seem promising for structural dynamics applications since they can integrate unconditional stability and explicit formulation together, which can enable the integration methods to save many computational efforts when compared to an implicit method. A newly developed structure-dependent integration method can inherit such numerical properties. However, an unusual overshooting behavior might be experienced as it is used to compute a forced vibration response. The root cause of this inaccuracy is thoroughly explored herein. In addition, a scheme is proposed to modify this family method to overcome this unusual overshooting behavior. In fact, two improved formulations are proposed by adjusting the difference equations. As a result, it is verified that the two improved formulations of the integration methods can effectively overcome the difficulty arising from the inaccurate integration of the steady-state response of a high frequency mode.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.229-234
• /
• 1992

This paper presents a compensator design method for multivariable feedback control systems with saturating actuators based on the concept of the equilibrium point. Am explicit expression for the compensation matrix of the general anti-reset windup(ARW) scheme is derived by minimizing the distances between the equilibrium points. The resulting dynamics of the compensated controller exhibits the reduced model form of the unsaturated system which can be obtained by the singular perturbational method. The proposed method is applicable to any open-loop stable plants with saturating actuators whose controllers are determined by some design technique. An example is given to show the effectiveness of the proposed method.

• 영어어문교육
• /
• 제10권3호
• /
• pp.113-126
• /
• 2004

Explicit reference to the work of other authors is an essential feature of most academic research writings. Corpus analysis of academic text can reveal much about what writers actually do and why they do so. Application of corpus tools in language education has been well documented by many scholars (Pedersen, 1995, Swales, 1990, Thompson, 2000). They demonstrate how computer technology can assist in the effective analysis of corpus based data. For teaching purposes, tills recent research provides insights in the areas of English for Academe Purposes (EAP). The need for such support is evident when students have to use appropriate citations in their writings. Using Swales' (1990) division of citation forms into integral and non-integral and Thompson and Tnbble's (2001) classification scheme, this paper codifies academic texts in a corpus. The texts are academic research articles from different disciplines. The results lead into a comparison of the citation practices m different disciplines. Finally, it is argued that the information obtained in this study is useful for EAP writing courses in EFL countries.

• 대한기계학회논문집B
• /
• 제28권5호
• /
• pp.553-559
• /
• 2004

Stratified flow past a three-dimensional obstacle such as a sphere has been a long-lasting subject of geophysical, environmental and engineering fluid dynamics. In order to investigate the effect of the stratification on the near wake, in particular, the unsteady vortex formation behind a sphere, numerical simulations of stratified flows past a sphere are conducted. The time-dependent Navier-Stokes equations are solved using a three-dimensional finite element method and a modified explicit time integration scheme. Laminar flow regime is considered, and linear stratification of density is assumed under Bossiness approximation. The computed results include the characteristics of the near wake and the unsteady vortex shedding. With a strong stratification, the separation on the sphere is suppressed and the wake structure behind the sphere becomes planar, resembling that behind a vertical cylinder.