• Korean Journal of Agricultural Science
• /
• v.32 no.1
• /
• pp.71-80
• /
• 2005

Phytic acid chelates excellently the metallic ions and the positive ions, especially has high affinity with $Fe^{2+}$ and $Ca^{2+}$. Merits of phytic acid can be taked in easily, edibile and harmless to body, so it was investigated that phytic acid can be substituted for EDTA in this study. 1. The Intensificative effect of chelating agent and disinfective osmotic shock of Vibrio vulnificus The number of initial existent fungi measured $1.7{\times}10^6$. The percentages of the survival fungi against the osmotic shock by distillated water were calculated at 1 minute, 3 minute and 5 minute after inoculation. The percentages of the survival fungi in $Mg^{2+}$ were 92.5%, 91.8% and 79.8% at each time, the average percentage was 88%. Also the sudden extinction was observed around 1 minute after inoculation and the survival fungi were not observed from 3 through 5 minute in spite of repeated experimentation. 2. Influence of Vibrio vulnificus on the survival of the mice. The first mouse started to die in 180 minute after inoculation in case that the inoculating number was $2.3{\times}10^7cfu/ml$. All died within 4.5 hour. The average of survival time was 226 minute. The first mouse started to die in 228 minute after inoculation in case that the inoculating number was $0.8{\times}10^6cfu/ml$. All died within 5 hour. The average of survival time was 300 minute and the survival time was 1.3 times high. The tendencies of death in two cases were similar, but the fatal rate were largely dependent on inoculating number.

• Journal of radiological science and technology
• /
• v.33 no.3
• /
• pp.261-268
• /
• 2010

This study is compared that the dose distribution by experimentation and radiation therapy planning (RTP) when the air cavity region was treated high energy photon. The dose measurements were performed with a 6 MV photon beam of linear accelerator. The polystyrene and self made acyl phantom were similar to tissue density of the human body. A parallel plate chamber was connected to an electrometer. The measurement setup was SCD (Source Chamber Distance) 100 cm and the distance of surface from air cavity was 3 cm. Absorbed dose of interface were measured by area and height. The percent depth dose were measured presence and absence of air cavity, depth according to a ratio of field size and air cavity size. The dose distribution on planning was expressed to do the inhomogeneity correction. As the area of air cavity was increased, the absorbed dose were gradually reduced. It was slightly increased, when the height of air cavity was changed from 0 cm to 0.5 cm. After the point, dose was decreased. In case of presence of air cavity, dose after distal air cavity interface was more great than absence of air cavity. The rebuild up by field size and area of air cavity occurred for field size, $4{\times}4\;cm^2$, $5{\times}5\;cm^2$ and $6{\times}6\;cm^2$, with fixed on area of air cavity, $5{\times}5\;cm^2$. But it didn't occur at $10{\times}10\;cm^2$ field size. On the contrary, the field size was fixed on $5{\times}5\;cm^2$, rebuild up occurred in area of air cavity, $4{\times}4\;cm^2$, $5{\times}5\;cm^2$. but, it did not occur for air cavity, $2{\times}2\;cm^2$, $3{\times}3\;cm^2$. All of the radiation therapy planning were not occurred rebuild up. It was required to pay attention to treat tumor in air cavity because the dose distribution of planning was different from the dose distribution of patient.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.1 s.116
• /
• pp.62-75
• /
• 2007

This paper describes a shaped-beam antenna for increasing the antenna gain of a radiating element. The proposed antenna structure is composed of an exciting element and a multi-layered disk array structure(MDAS). The stack micro-strip patch elements were used as the exciter for effectively radiating the electromagnetic power to the MDAS over the broadband, and finite metallic disk array elements - which give the role of a director for shaping the antenna beam with the high gain - were finitely and periodically layered onto it. The efficient power coupling between the exciter and the MDAS should be carried out in such a way that the proposed antenna has a high gain characteristic. The design parameters of the exciter and the MDAS should be optimized together to meet the required specifications to meet the required specifications. In this study, a shaped-beam antenna with high gain was optimally designed under the operating conditions with a linear polarization and the frequency band of $9.6{\sim}10.4\;GHz$. Two methods constructed using thin dielectric film and dielectric foam materials respectively were also proposed in order to implement the MBAS of the antenna. In particular, through the computer simulation process, the electrical performance variations of the antenna with the MDAS realized by the thin dielectric film materials were shown according to the number of disk array elements in the stack layer. Two kinds of antenna breadboard with the MDAS realized with the thin dielectric film and dielectric foam materials were fabricated, but experimentation was conducted only on the antenna breadboard(Type 1) with the MDAS realized with the thin dielectric film materials according to the number of disk array elements in the stack layer in order to compare it with the electrical performance variations obtained during the simulation. The measured antenna gain performance was found to be in good agreement with the simulated one, and showed the periodicity of the antenna gain variations according to the stack layer number of the disk array elements. The electrical performance of the Type 1 antenna was measured at the center frequency of 10 GHz. As the disk away elements became the ten stacks, a maximum antenna gain of 15.65 dBi was obtained, and the measured return loss was not less than 11.4 dB within the operating band. Therefore, a 5 dB gain improvement of the Type 1 antenna can be obtained by the MDAS that is excited by the stack microstrip patch elements. As the disk array elements became the twelve stacks, the antenna gain of the Type 1 was measured to be 1.35 dB more than the antenna gain of the Type 2 by the outer dielectric ring effect, and the 3 dB beam widths measured from the two antenna breadboards were about $28^{\circ}$ and $36^{\circ}$ respectively.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.1
• /
• pp.34-38
• /
• 2017

Purpose During PET/CT examinations, the movements of internal organs caused by respiration are captured in images during multiple breathing cycles, resulting in the increases in tumor size and effects on SUV. Respiratory synchronized systems were used to evaluate tumor sizes and SUV changes. Materials and Methods Biograph mCT 64 was used for the equipment, and RPM and Anzai systems were used for the respiratory synchronized systems. We used point source and micro-phantom for an experimentation. We were performed on 12 patients who had solid tumors discovered at the base of the lung or at the top of the liver from August through September 2016. The PET images of the exhalation-to-breathing state and the CT images of the post-exhalation suspension state were gained to evaluate changes in radioactivity concentration (KBq/mL), SUVmax, cylinder diameter (mm), and tumor diameter (cm) under the conventional Static, RPM, and Anzai methods. Results The result of measuring the radioactivity concentration of the point source was RPM 94% and Anzai 91% against Static, respectively. In the two cylinders of different radioactivity in the micro-phantom, the SUVmax increased to RPM 61% and 78%, and Anzai 58% and 77% against Static, whereas the cylinder diameters decreased by RPM -26% and -28%, and Anzai -28% and -26%, each respectively. Among the patients, the SUVmax increased from a minimum of RPM 8.2% to a maximum of 94.4% against Static, and from a minimum of Anzai 7.6% to a maximum of 68.3%, respectively. As for the tumor diameters, a minimum of RPM -7.6% to a maximum of -28.9% were achieved, while the Anzai fell by a minimum of -9.6% to a maximum of -27.7%, respectively. There was no significant difference discovered in the phantom study between the RPM and Anzai, yet there was a meaningful difference in the patients' tumors (P<0.05). Conclusion The respiratory synchronized systems of RPM and Anzai yielded no significant difference in the phantom study in which the respiration was executed at regular intervals. However, it was discovered that the patients had a meaningful difference for the irregular respiratory cycle and inter-system differences. Still, the respiratory synchronized systems would be useful for the accurate diagnosis and SUV measurement as the tumor decreased in size against the existing Static and the SUV increased.

• Korean Journal of Organic Agriculture
• /
• v.7 no.1
• /
• pp.115-127
• /
• 1998

Under the visual judgement of consumers, to reduce nitrate intake through vegetables, this experimentation analyzed the content of nitrate, in heading leaf vegetables such as chinese cabbage(Brassica campestris L. ssp. perkinensis (Lour.) Rupr), cabbage(Brassica oleracea L. var. capitata) and lettuce(Lactuca sativa L.) by the leaf number. And the result is summarized as follows In the nitrate content change by the leaf number, the nitrate content is increased as it goes by from inner leaf to outer leaf and the nitrate content in leaf midrib is higher than that in leaf blade. In case of chinese cabbage, the nitrate content in the leaf midrib from the most inner leaf to the most outer leaf changed 40-3,177ppm and in the leaf blade it changed 40-2,887ppm. But the nitrate content in the leaf blade of cabbage from the most inner leaf to the most outer leaf changed 89~2,297ppm and in the leaf blade it changed 25~765ppm. In case of lettuce, the nitrate content change of the leaf midrib by the leaf position was 419~4,349ppm, and in the leaf blade it changed 260~2894ppm. It was conclude that the outer leaf of chinese cabbage, cabbage and lettuce should be removed to keep the lower nitrate intake by population before it is consumed.

• The Korean Journal of Archival Studies
• /
• no.10
• /
• pp.276-322
• /
• 2004

Historical interest in China in 1930s has been mostly focused on political characteristic of the National Government(國民政府) which was established by the KMT(中國國民黨) as a result of national unification. It is certain that China had a chance to construct a modern country by the establishment of the very unified revolutionary government. But, it was the time of expanding national crises that threatened the existence of the country such as the Manchurian Incident and the Chinese-Japanese War as well as the chaos of the domestic situation, too. So it has a good reason to examine the characteristic and pattern of the response of the political powers of those days. But, as shown in the recent studies, the manifestation method of political power by the revolutionary regime catches our attention through the understanding of internal operating system. Though this writing started from the fact that the Nationalist Government executed the administrative reform which aimed at "administrative efficiency" in the middle of 1930s, but it put stress on the seriousness of the problem and its solution rather than political background or results. "Committee on Administrative Efficiency(行政效率委員會)", the center of administrative reform movement which was established in 1934, examined the plan to execute the reform through legislation by the Executive Council(行政院) on the basis of the results of relevant studies. They claimed that the construction of a modern country should be performed by not political revolution anymore but by gradual improvement and daily reform, and that the operation of the government should become modern, scientific and efficient. There were many fields of administrative reform subjects, but especially, the field of records and archives adminstration(文書檔案行政) was studied intensively from the initial stage because that subject had already been discussed intensively. They recognized that records and archives were the basic tool of work performance and general activity but an inefficient field in spite of many input staff members, and most of all, archival reform bring about less conflicts than the fields of finance, organization and personnel. When it comes to the field of records adminstration, the key subjects that records should be written simply, the process of record treatment should be clear and the delay of that should be prevented were already presented in a records administrative meeting in 1922. That is, the unified law about record management was not established, so each government organization followed a conventional custom or performed independent improvement. It was through the other records administrative workshop of the Nationalist Government in 1933 when the new trend was appeared as the unified system improvement. They decided to unify the format of official records, to use marker and section, to unify the registration of receipt records and dispatch records and to strengthen the examination of records treatment. But, the method of records treatment was not unified yet, so the key point of records administrative reform was to establish a unified and standard record management system for preventing repetition by simplifying the treatment procedure and for intensive treatment by exclusive organizations. From the foundation of the Republic of China to 1930s, there was not big change in the field of archives administration, and archives management methods were prescribed differently even in the same section as well as same department. Therefore, the point at issue was to centralize scattered management systems that were performed in each section, to establish unified standard about filing and retention period allowance and to improve searching system through classification and proper number allowance. Especially, the problem was that each number system and classification system bring about different result due to dual operation of record registration and archives registration, and that strict management through mutual contrast, searching and application are impossible. Besides, various problems such as filing tools, arrangement method, preservation facilities & equipment, lending service and use method were raised also. In the process this study for the system improvement of records and archives management, they recognized that records and archives are the identical thing and reached to create a successive management method of records and archives called "Records and Archives Chain Management Method(文書檔案連鎖法)" as a potential alternative. Several principles that records and archives management should be performed unitedly in each organization by the general record recipient section and the general archives section under the principle of task centralization, a consistent classification system should be used by classification method decided in advance according to organizational constitution and work functions and an identical number system should be used in the process of record management stage and archive management stage by using a card-type register were established. Though, this "Records and Archives Chain Management Method" was developed to the stage of test application in several organizations, but it was not adopted as a regular system and discontinued. That was because the administrative reform of the Nationalist Government was discontinued by the outbreak of the Chinese-Japanese War. Even though the administrative reform in the middle of 1930s didn't produce practical results but merely an experimentation, it was verified that the reform against tradition and custom conducted by the Nationalist Government that aimed for the construction of a modern country was not only a field of politics, but on the other hand, the weak basis of the government operation became the obstacle to the realization of the political power of the revolutionary regime. Though the subject of records and archives administrative reform was postponed to the future, it should be understood that the consciousness of modern records and archives administration and overall studies began through this examination of administrative reform.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.4
• /
• pp.94-104
• /
• 2018

This study examined photogrammetric reconstruction techniques that can measure the original form of a cultural property utilizing photographs taken in the past. During the research process, photographs taken in the past as well as photograph on the internet of Soswaewon Garden in Damyang(scenic site 40) were collected and utilized. The landscaping structures of Maedae, Aiyangdan, Ogokmun Wall, and Yakjak and natural scenery Gwangseok, of which photographs can be taken from any 360 degree direction from a close distance or a far distance without any barriers in the way, were selected and tested for the possibility of reproducing three-dimensional shapes. The photography method of 151 landscape photographs (58.6%) from internet portal sites for the aforementioned five landscape subjects containing information on the date the photograph was taken, focal length, and exposure were analyzed. As a result of the analysis, it was revealed that the majority of the photographs tend to focus on important parts of each subject. In addition, we discovered that there are two or three photography methods that internet users preferred in regards to each landscape subject. For the purposes of the experiment, photographs in which a single scene consistently appears for each landscape subject and it was determined that there was a high level of preference related to the photography method were analyzed, and three-dimensional mesh shape model was produced with a photoscan program to analyze the reproducibility of three-dimensional shapes. Based on the results of the reproduction, it was relatively possible to reproduce three-dimensional shapes for artifacts such as Ogukmun wall, Maedae, and Aeyangdan, but it was impossible to reproduce three-dimensional images for natural scenery or an object that has similar texture such as Yakjak and Gwangseok. As a result of experimentation related to the reconstruction of three-dimensional shapes with the photographs taken on site using a photography method similar to that of the photographs selected as previously mentioned, there was success related to reproducing the three-dimensional shapes of Yakjak and Gwangseok, of which it was not possible to do so through the photographs that had been collected previously. In addition, through comparison of past and present images, it was possible to measure the exact sizes as well as discover any changes that have taken place. If past photographs taken by tourists or landscape architects of cultural properties can be obtained, the three-dimensional shapes from a particular period of time can be reproduced. If this technology becomes widespread, it will increase the level of accuracy and reliability in regards to measuring the past shapes of cultural landscape properties and examining any changes to the properties.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.1
• /
• pp.175-183
• /
• 2021

Gongjae Yoon DuSeo(1668~1715), from Haenam in the late Joseon Dynasty, is a scholar-born painter who was active during King Sukjong. He is the person who created the foundation as a pioneer of realist paintings in the late Joseon period during the transition from the middle to the latter period. He was born in Namin's prestigious family, but he ended his career as part of a partisan fight and immersed himself in painting and learning. 18C, the beginning of the late Joseon Dynasty, was a period when Silhak emerged and the Jinkyung era opened with awareness of nationalism. At this time, by incorporating the Silhak thought into the art world, the real reformed aesthetic consciousness was demonstrated to pioneer common people's customs, the application of Western painting methods, the pursuit of realist techniques, and the introduction of Namjongmuninhwa. His view of painting, who thoroughly learned the old things and pursued change, must have both the form and spirit that he can achieve 'HwaDo' only when it has the science of 'learning and knowledge' and the technical elements of 'practice and quality' emphasized. He has worked in a variety of reconciliations. In particular, portrait paintings are characterized by ihyeongsasin's realistic expressions of aesthetics. His masterpiece, 「Self-portrait」, excels in extreme-realistic depiction and innovation in composition, and stands out with an unconventional experimentation spirit that expresses his mind and thoughts in a painting with a sense of resentment. His landscape paintings combine to express the form as it is and mental notions, and beautifully embodied Do as a form, thus achieving ihyeongmido, which reached the level of'joyfulness forgotten even the heart of joy'. On the other hand, the generalization of the common people using various common people's lives as the subject of an open-mindedness aimed at gaining the facts of ihyeongsajin, a passive protest against corrupt power and an expression of a spirit of love. Since then, his painting style has been passed down from generation to generation to his eldest son Yoon Deok-hee and his grandson Yoon Yong, leading the change and revival of calligraphy art in the late Joseon Dynasty.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.27 no.3
• /
• pp.127-143
• /
• 2022

Recently, many attempts to run numerical ocean models in cloud computing environments have been tried actively. A cloud computing environment can be an effective means to implement numerical ocean models requiring a large-scale resource or quickly preparing modeling environment for global or large-scale grids. Many commercial and private cloud computing systems provide technologies such as virtualization, high-performance CPUs and instances, ether-net based high-performance-networking, and remote direct memory access for High Performance Computing (HPC). These new features facilitate ocean modeling experimentation on commercial cloud computing systems. Many scientists and engineers expect cloud computing to become mainstream in the near future. Analysis of the performance and features of commercial cloud services for numerical modeling is essential in order to select appropriate systems as this can help to minimize execution time and the amount of resources utilized. The effect of cache memory is large in the processing structure of the ocean numerical model, which processes input/output of data in a multidimensional array structure, and the speed of the network is important due to the communication characteristics through which a large amount of data moves. In this study, the performance of the Regional Ocean Modeling System (ROMS), the High Performance Linpack (HPL) benchmarking software package, and STREAM, the memory benchmark were evaluated and compared on commercial cloud systems to provide information for the transition of other ocean models into cloud computing. Through analysis of actual performance data and configuration settings obtained from virtualization-based commercial clouds, we evaluated the efficiency of the computer resources for the various model grid sizes in the virtualization-based cloud systems. We found that cache hierarchy and capacity are crucial in the performance of ROMS using huge memory. The memory latency time is also important in the performance. Increasing the number of cores to reduce the running time for numerical modeling is more effective with large grid sizes than with small grid sizes. Our analysis results will be helpful as a reference for constructing the best computing system in the cloud to minimize time and cost for numerical ocean modeling.

• Journal of the Korean Society of Earth Science Education
• /
• v.15 no.2
• /
• pp.213-223
• /
• 2022

The purpose of this study is to identify the types of essential inquiry activities presented in elementary science textbooks for grades 5-6, and to find out what difficulties teachers have in the actual teaching process. To this end, the essential research activities presented in the textbook were analyzed into six types: experimentation/observation, investigation/discussion and presentation, data interpretation, discussion/discussion, simulation activity, and expression. In addition, 108 elementary school teachers were investigated for the suitability of inquiry activity achievement standards, suitability at the student's level, student interest, and difficulty in teaching instruction. To summarize the research results, the most frequently suggested type was the experiment/observation type, followed by simulation activity type and data interpretation type. It was analyzed that there was no discussion/discussion type in the 5th grade textbooks, and the 6th graders did not present research activities that correspond to the research/discussion/presentation type and the expression type in the textbook. In the results of teachers' responses to the suitability of achievement standards for inquiry activities presented in textbooks and the suitability of the student's level, 5th graders showed lower average scores than 6th graders, and showed similar average scores in student interest and instructional difficulty. Also, it was confirmed that improvement was required for a total of 17 inquiry activities. Specifically, teachers responded that they had difficulty in guiding inquiry activities when the experimental results did not appear as intended in the textbook, when students' interest in inquiry activities was low, and when students and teachers had low understanding of related science concepts. Teachers pointed out practical problems such as difficulties in long-term observation in astronomy-related units, and students in upper elementary school not actively participating in dynamic play activities.