• Ocean and Polar Research
• /
• v.37 no.2
• /
• pp.119-125
• /
• 2015

This paper focuses on the efficient arrangement plan of buoyancy modules, which plan is used to secure the safe operation and structural stability of a marine riser. The marine riser is connected between a vessel and seabed devices. The movement of the vessel and the seabed devices are affected by the motion of the riser. The riser of a deep-seabed integrated mining system exerts a strong influence on the healthy transfer of minerals. So, buoyancy modules must be equipped to compensate for the problem which is the structure stability and the dynamic motion. Installation locations and quantities of the buoyancy modules are determined by real sea experiments. But this is not easy to do because in real sea experimental conditions the cost is expensive as well as being, time-consuming and dangerous. Therefore, the locations and quantities should be determined by numerical simulation. This method is called simulation-based design. The dynamic analysis models of the riser and the buoyancy modules are built into the commercial software of DAFUL.

• Clinical and Experimental Pediatrics
• /
• v.56 no.5
• /
• pp.211-217
• /
• 2013

Purpose: Sleep onset association disorder (SOAD) is a form of behavioral insomnia observed in children that is caused by inappropriate sleep training. SOAD typically disturbs the sleep of not only infants and children but also their parents. We investigated levels of depression and marital intimacy among parents of infants with typical SOAD, to understand the influence of SOAD on family dynamics, as well as examine ways for improving depression and marital intimacy through behavioral training. Methods: Depression and marital intimacy were assessed using the Beck Depression Inventory (BDI) and Waring Intimacy Questionnaire (WIQ). These measures were administered to 65 parents of infants (n=50) diagnosed with SOAD. We conducted sleep education and behavioral training for the parents and compared levels of depression and marital intimacy after 2-6 weeks of training. Results: The 65 parents consisted of 50 mothers and 15 fathers. Depressive symptoms were higher among mothers than fathers (P=0.007). Marital intimacy was negatively correlated with depressive symptoms. Twenty-six parents were assessed again after sleep training. We found that mothers' depressive symptoms and marital intimacy improved post training. Conclusion: SOAD can be detrimental to both infants and parents, especially for parents who sleep with their infants. For instance, disruption of sleep patterns in such parents can reduce marital intimacy. However, behavioral modification is an effective treatment for infants with frequent nighttime waking, as well as for diminishing the depressive symptoms of sleep-deprived parents.

• Asian Journal of Atmospheric Environment
• /
• v.12 no.1
• /
• pp.47-58
• /
• 2018

The aim of this work is to investigate the effect of atmospheric stability on near-field pollutant dispersion from rooftop emissions of a single cubic building using computational fluid dynamics (CFD). This paper used the shear stress transport (here after SST) k-${\omega}$ model for predicting the flow and pollutant dispersion around an isolated cubic building. CFD simulations were performed with two emission rates and six atmospheric stability conditions. The results of the simulations were compared with the data from wind tunnel experiments and the result of simulations obtained by previous studies in neutral atmospheric condition. The results indicate that the reattachment length on the roof ($X_R$) obtained by computations show good agreement with the experimental results. However, the reattachment length of the rooftop of the building ($X_F$) is greatly overestimated compared to the findings of wind tunnel test. The result also shows that the general distribution of dimensionless concentration given by SST k-${\omega}$ at the side and leeward wall surfaces is similar to that of the experiment. In unstable conditions, the length of the rooftop cavity was decreased. In stable conditions, the horizontal velocity in the lower part around the building was increased and the vertical velocity around the building was decreased. Stratification increased the horizontal cavity length and width near surface and unstable stratification decreased the horizontal cavity length and width near surface. Maintained stability increases the lateral spread of the plume on the leeward surface. The concentration levels close to the ground's surface under stable conditions were higher than under unstable and neutral conditions.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.5
• /
• pp.532-536
• /
• 2008

In this paper, we propose the method to measure tensions of character motions, using LMA (Laban Movement Analysis). Using tension values, we tan take advantage of them as a standard for synchronization of motion and BGM(Back Ground Music). In LMA, a motion is divided into 4 space-time factors which are called Efforts, and each Effort has two bases opposed to each other. We can analyze the motion by justifying which basis is stronger than the other in each Effort of motion. To measure quantitatively tension values, we propose some equations based on kinematics and dynamics. Then we can measure the tension value by the weighted sum of values calculated from those equations. Each weight can be determined by the optimization process which tries to minimize the difference between the calculated tension value and human's decision. The experimental result shows that the in creasing order of the motion tension value is similar to that of the tension score given by human.

• Journal of Advanced Navigation Technology
• /
• v.15 no.4
• /
• pp.495-501
• /
• 2011

The characteristics of a discriminator estimating a tracking error in a signal tracking loop of a GPS receiver can be affected by the noise power, and the slope of the discriminator function is actually lowered as the noise power increases. In this paper, an algorithm to compensate the lowered slope of the function using the estimated C/N0 is studied, and a new design method of a code tracking which provides more accurate tracking error than a conventional one by adopting the compensation algorithm is proposed. Through the experimental results, finally, it has been check that the accuracy of the proposed DLL is enhanced about 50% when the dynamics of the vehicle is 20g/s.

• Korean Chemical Engineering Research
• /
• v.58 no.2
• /
• pp.190-196
• /
• 2020

The step to obtain a process dynamic model through process experiments is very important because it needs times and expenditures. Step response method is one of the standard methods to have long been used for understanding process dynamics, obtaining dynamical models and designing control systems. For the step response, it is usually required to measure process output for a step input change in the open-loop manner. Its disadvantage criticized is the long open-loop operation. For this, a method based on the time-optimal control technique to minimize the test time for obtaining the step response has been recently presented. However, the method requires iterative computations for the minimization of test times. Here, a method where iterative computations are not required is proposed. Simulation results are presented to show that test times to obtain step responses are reduced considerably and an autotuning method based on the proposed method is compared with the relay feedback autotuning method accepted widely for the autotuning of controllers.

• Journal of Korean Society of Forest Science
• /
• v.80 no.3
• /
• pp.303-310
• /
• 1991

Seasonal patterns of decomposition and nutrient release from the needle litter were examined using litter-bags in coastal Pinus thunbergii forests in nothern Kyushu, Japan. Dry matter losses from decomposing needle litter were smillar in all standsover a experimental period. Mass loss in dry weight is lost rapidly during the first year, and thereafter the rate of loss slows. Litter lost approximately 40% of initial mass in 1 yr. The predicted decay constant, k values ranged from 0.5 to 0.6 Decomposition half-times($t_{0.50}$) ranged from 1.1 to 1.4 year. In the decomposing needle litter, the concentrations of N and P generally increased with time while the concentration of K decreased. A decrease in absolute amount was noted for K during decomposition while in an increase was found for N. The order of mobility of elements was K>P>N. Mineralization phase of N had not appeared during the experiment.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.1
• /
• pp.51-56
• /
• 2008

In this work the realistic install performance analysis of a helicopter was performed together with power extraction enabling to operate auxiliary system as well as intake pressure loss, loss due to bleed air, etc. which must be considered in practical propulsion system's performance modelling to be installed to the airframe. The pressure loss occurring in intake was estimated from the intake performance map with relationships of Mach Number and pressure loss. In order to evaluate the proposed installed performance model, the experimental data for comparison must be needed when mounted in propulsion system. However because of lack of accessibility to such real data at the moment, the alternative way was made through comparison that the analysis results by the proposed model were compared with a wellknown commercial program GASTURB's analysis results. The validity of the proposed installed performance model was consequently confirmed because its average deferences from the GASTURB's results were within 0.5%.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.1
• /
• pp.9-14
• /
• 2009

A numerical investigation was performed based on the Reynolds-Averaged Navier-Stokes(RANS) equations for the two-dimensional unsteady flow around a vertical axis turbine(VAT) with three or four blades. VAT is one of the promising devices for tidal current energy conversion. The geometry of the turbine blade was $NACA65_3$-018 airfoil, for which CFD analysis using Fluent was carried out at several angles of attack and the results were compared with the corresponding experimental data for validation and calibration. Then CFD simulations were carried out for the whole vertical axis turbine with a two-dimensional setup. The CFD simulation demonstrated the usefulness of the method to study the typical unsteady flows around VATs and the results showed that the optimum turbine efficiency could be achieved for carefully selected combinations of the number of blade and Tip-Speed Ratio(TSR).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.5
• /
• pp.381-390
• /
• 2016

In this study, aeroacoustic characteristics of combined fan are investigated and noise was reduced by applying Serrated Trailing Edge which is known as the method to reduce fan noises. Unsteady CFD (Computational Fluid Dynamics) analysis was carried out using Lattice Boltzmann Method(LBM) to figure out the combined fan's aeroacoustics and experimental results was used to verify simulation results. Results show that different BPFs are generated at the each inner fan and outer fan on the different frequency while Blade Passing Frequency(BPF) of general fans is constant on the entire frequency range. Boundary vortex and vortex shedding are suppressed or dispersed by applying the Serrated Trailing Edge to the inner fan. Furthermore, broadband noise and fan's torque are reduced.