복합레진의 간헐적 광중합 방법이 변연적합도에 미치는 영향 (THE EFFECT OF INTERMITTENT COMPOSITE CURING ON MARGINAL ADAPTATION)
-
- Restorative Dentistry and Endodontics
- /
- 제32권3호
- /
- pp.248-259
- /
- 2007
이 실험의 목적은 광중합복합 레진을 자체 제작한 광조사 차단 장치를 이용하여 간헐적 광중합시켜 기존의 연속 중합법과 변연적합도를 비교함으로써 간헐적 광중합의 영향을 알아 보는 것이다. 이번 실험에 사용된 재료는 Pyramid (Bisco, Schaumburg, U.S.A)와 Heliomolar (Ivoclar Vivadent, Liechtenstein)이다. 발치된 상악 소구치에 class II MOD 와동 형성 후 위 두 재료를 bulk 충전하고 다음의 중합cycle에 따라 중합시켰다: 제1군- 연속 광중합 (60초간 계속 광조사); 제2군-2초 광조사, 1초 광차단 (90초 시행); 제3군- 1초 광조사 1초 광차단 (120초 시행); 제4군- 1초 광조사, 2초 광차단 (180초 시행). 저작재현장치 (R&B, Daejeon, Korea)로 720000회의 운동횟수, 분당 120의 회전속도,
목 적: 방사선치료의 가장 기본적인 조건은 정상조직의 불필요한 피폭을 방지하는 것이다. 유방암의 경우는 폐와 심장에 조사되는 선량이 중요하게 평가되는 인자이다. 따라서 유방암 방사선치료 자세에 따른 정상조직에 조사되는 선량을 비교하고 그 연관성을 상관관계 분석을 통하여 결과를 확인하여 보다 효과적인 유방암 방사선 치료방법을 모색하고자 한다. 대상 및 방법: 본원을 내원한 좌측 유방암 환자 30명을 대상으로 Supine, Prone Position에서 CT image를 획득하였다. Eclipse Treatment Planning System(Version 11, USA)을 이용하여 전산화치료계획을 수립하였다. DVH(Dose Volume Histogram)을 통해 Position 별로 정상조직에 조사된 선량을 비교하였다. 그 결과를 바탕으로 SPSS(Version 18)을 이용하여 각 정상조직의 선량인자를 통계분석하고 항목 간 상관관계 분석 및 독립표본 t-test를 통하여 그 연관성을 알아보았다. 그리고 MIRADA RTx(Version Advanced 1.6, UK)를 이용하여 HI(Homogeneity Index)와 CI(Conformity Index)를 Supine, Prone Position에서 값을 구하고 비교하였다. 결 과: 유방암의 전산화치료계획의 결과 폐의 경우는 Supine Position에서 V20은
산업혁신의 흐름에 발맞추어 다양한 분야에서 활용되고 있는 IoT 기술은 빅데이터의 접목을 통한 새로운 비즈니스 모델의 창출 및 사용자 친화적 서비스 제공의 핵심적인 요소로 부각되고 있다. 사물인터넷이 적용된 디바이스에서 누적된 데이터는 사용자 환경 및 패턴 분석을 통해 맞춤형 지능 시스템을 제공해줄 수 있어 편의 기반 스마트 시스템 구축에 다방면으로 활용되고 있다. 최근에는 이를 공공영역 혁신에 확대 적용하여 CCTV를 활용한 교통 범죄 문제 해결 등 스마트시티, 스마트 교통 등에 활용하고 있다. 그러나 이미지 데이터를 활용하는 기존 연구에서는 개인에 대한 사생활 침해 문제 및 비(非)일반적 상황에서 객체 감지 성능이 저하되는 한계가 있다. 본 연구에 활용된 IoT 디바이스 기반의 센서 데이터는 개인에 대한 식별이 불필요해 사생활 이슈로부터 자유로운 데이터로, 불특정 다수를 위한 지능형 공공서비스 구축에 효과적으로 활용될 수 있다. 대다수의 국민들이 일상적으로 활용하는 도시철도에서의 지능형 보행자 트래킹 시스템에 IoT 기반의 적외선 센서 디바이스를 활용하고자 하였으며 센서로부터 측정된 온도 데이터를 실시간 송출하고, CNN-LSTM(Convolutional Neural Network-Long Short Term Memory) 알고리즘을 활용하여 구간 내 보행 인원의 수를 예측하고자 하였다. 실험 결과 MLP(Multi-Layer Perceptron) 및 LSTM(Long Short-Term Memory), RNN-LSTM(Recurrent Neural Network-Long Short Term Memory)에 비해 제안한 CNN-LSTM 하이브리드 모형이 가장 우수한 예측성능을 보임을 확인하였다. 본 논문에서 제안한 디바이스 및 모델을 활용하여 그간 개인정보와 관련된 법적 문제로 인해 서비스 제공이 미흡했던 대중교통 내 실시간 모니터링 및 혼잡도 기반의 위기상황 대응 서비스 등 종합적 메트로 서비스를 제공할 수 있을 것으로 기대된다.
건강식품의 일종으로 알려져 있는 녹즙의 소비가 크게 증가하는 추세에 있기 때문에 이들 식음료를 통한 질산염 섭취량이 일일 섭취량 계산에서 무시될 수 없을 뿐만 아니라 질산염의 일일 섭취량 계산을 위해서도 녹즙종류별
본 연구는 Node2vec 그래프 임베딩 방법과 Light GBM 링크 예측을 활용해 우리나라 식음료 산업의 미개척 수출 후보국가를 탐색한다. Node2vec은 네트워크의 공통 이웃 개수 등을 기반으로 하는 기존의 링크 예측 방법에 비해 상대적으로 취약하다고 알려져 있던 네트워크의 구조적 등위성 표현의 한계를 개선한 방법이다. 따라서 해당 방법은 네트워크의 커뮤니티 탐지와 구조적 등위성 모두에서 우수한 성능을 나타내는 것으로 알려져 있다. 이에 본 연구는 이상의 방법을 우리나라 식음료 산업의 국제 무역거래 정보에 적용했다. 이를 통해 해당 산업의 글로벌 가치사슬 관계에서 우리나라의 광범위한 마진 다각화 효과를 창출하는데 기여하고자 한다. 본 연구의 결과를 통해 도출된 최적의 예측 모델은 0.95의 정밀도와 0.79의 재현율을 기록하며 0.86의 F1 score를 기록해 우수한 성능을 나타냈다. 이상의 모델을 통해 도출한 우리나라의 잠재적 수출 후보국가들의 결과는 추가 조사를 통해 대부분 적절하게 나타난 것을 알 수 있었다. 이상의 내용을 종합하여 본 연구는 Node2vec과 Light GBM을 응용한 링크 예측 방법의 실무적 활용성에 대해 시사할 수 있었다. 그리고 모델을 학습하며 링크 예측을 보다 잘 수행할 수 있는 가중치 업데이트 전략에 대해서도 유용한 시사점을 도출할 수 있었다. 한편, 본 연구는 그래프 임베딩 기반의 링크 예측 관련 연구에서 아직까지 많이 수행된 적 없는 무역거래에 이를 적용했기에 정책적 활용성도 갖고 있다. 본 연구의 결과는 최근 미중 무역갈등이나 일본 수출 규제 등과 같은 글로벌 가치사슬의 변화에 대한 빠른 대응을 지원하며 정책적 의사결정을 위한 도구로써 충분한 유용성이 있다고 생각한다.
7.1 옛날부터 재목(材木)을 오래 불에 담그어 쓰면 덜트로 덜 휜다고 하였는데 말로서 전(傳)하여 왔을 뿐 그 연구결과(硏究結果)나 또는 그 원인(原因)에 대한 것은 분명(分明)치 못하였다. 한편 재목(材木)의 추출성분(抽出成分)이 그 재목(材木)의 물리적(物理的) 성질(性質)에 영향(影響)할 것이라는 추측(推測)은 많었으나 실지로 그 영향(影響)에 대한 연구(硏究)를 하여 그 결과(結果)와 그 원인(原因)을 밝힌 것도 극(極)히 적었다. 이 연구(硏究)는 이와같은 입장(立場)에 놓여있는 그 간미지(間未知)한 점(点)을 밝히기 위(爲)하여 다시말하면 재목(材木)을 물에 담그어 그 수용성(水溶性) 추출물(抽出物)을 추출(抽出)하므로써 일어나는 물리적(物理的) 성질(性質)에 대한 결과(結果)를 조사(調査)하고 이 결과(結果)를 통(通)하여 얻는 진리(眞理)를 응용(應用)하여 재목(材木)의 일대 흠점(欠点)인 수축(收縮), 팽창(膨脹) 이에따라 일어나는 트는것, 휘는것, 틀어지는 것 등(等)을 막아 재목이용(材木利用)의 합리화(合理化)를 기(期)할 목적(目的)으로써 시작(始作)된 것이며 Yale 재과대학(材科大學) 목재이용학(木材利用學) 연구실(硏究室)에서 담당교수 F.F.Wangaard 박사(博士) 지도하(指導下)에 재료(材料)는 동(同) 연구실(硏究室)에 준비(準備)되어 있는 북미(北美)산 스트로 - 부 소나무 참나무 그리고 남방열대(南方熱帶)산 하이메나에아의 삼(三) 종류(種類)에 대하여 연구(硏究)되었다. 7.2 연구(硏究)의 대상이 된 물리적(物理的) 성질(性質)은 목재(木材)의 실용적 사용(使用)에 있어서 가장 관계가 깊은 다시 말하면 트고 휘고 틀어지는등(等)의 관계가 깊은 평형함수량(平衡含水量), 수축(收縮), 팽창(膨脹) 그리고 강도(强度)의 지표(紙票)가 되는 비중(比重)등이 있다. 7.3 시험(試驗)은 위에 말한 세 가지 종류(種類)를 가지고 추출처리(抽出處理)를 하여 추출(抽出)한것과 반대로 추출성(抽出性) 물질(物質)은 침투(浸透)시킨것에 대하여 비교(比較)될 무처리(無處理)한 세 다른 공시재(供試在)를 준비(準備)하여 실시되었다. 다음 시험결과(試驗結果)는 7.4 수용성(水溶性) 추출물(抽出物)이 추출량(抽出量)과 그 추출액중(抽出液中)의 성분(成分)그룹은 Table 36에 표시(表示)된것과 같으며 나무 종류(種類)에 따라 추출량(抽出量)에 그리고 각(各) 성분(成分)그룹의 종류(種類)와 그 양(量)에 차이(差異)를 볼수 있었다. 7.5 평형함수량(平衡含水量)에 있어서는 a) 추출처리(抽出處理)를 하여 그 추출성분(抽出成分)이 빠져버린 공시재(供試材)와 그와 반대의 공시재(供試材) 사이에는 확실한 차이(差異)가 있어 추출성분(抽出成分)을 재내(材內)에 포함(包含)하고 있으므로써 같은 관계흡도에서 80%방습시(放濕時)는 이와 반대 평형함수량(平衡含水量)은 많아졌다. b) 설탕액(雪糖液)에 담그어 침투처리(浸透處理)를 하여 당분(糖分)이 재내(材內)에 침입(侵入)된 공시재(供試材)는 대체(大體) 추출처리(抽出處理)를 하지 않은 공시재(供試材)와 거의 같은 경향(傾向)의 결과(結果)를 나타내고 있다. c) 나무의 종류(種類)에 따른 차이(差異)는 일정한 경향(傾向)을 볼 수 없으나 스트로-부 소나무의 심재부(心材部)와 변재부를 비교(比較)하면 심재부(心材部)는 그 평형함수량(平衡含水量)이 적다. 이것은 원래(元來)의 함수량(含水量)에 있어서 심재부(心材部)가 적은데 이와같은 차이(差異)는 식물생리학적(植物生理學的) 또는 그 해부학적(解剖學的) 구조(構造)의 차이(差異)에서 생기는 것이다. 7.6 수축(收縮)에 있어서는 a) 추출처리(抽出處理)를 한 공시재(供試材)의 수축량(收縮量)은 그와 반대로 추출처리(抽出處理)를 않어 추출성분(抽出成分)이 그대로 남어있는 공시재(供試材)에 비교(比較)하여 그 수축량(收縮量)이 모두 크다. b) 설탕액(雪糖液)에 담그어 침투처리(浸透處理)를 한 공시재(供試材)는 그 수축량(收縮量)은 다른것에 비교(比較)하여 제일 적고 모두 침투처리(浸透處理)를 하지않은 공시재(供試材)와 거의 같은 결과(結果)를 보이고 있는데 이것은 재목(材木)을 사용전(使用前)에 특수(特殊)한 침투처리(浸透處理)를 하여 쓰면 재목(材木)의 일대 흠점(欠点)인 수축(收縮)을 막을수 있다는 것을 실증하는 것이다. c) 나무의 종류별(種類別)로보면 스트로-부 소나무의 심재부(心材部)는 그 변재부보다 수축량(收縮量)이 적으며 참나무의 수축량(收縮量)은 제일 크로 스토로-부 소나무에 비교(比較)하여 약(約)2배(倍) Hymenaea는 참나무 보다 적고 스트로 - 부 소나무 보다는 컸다. d) 각(各) 수종(樹種)을 통(通)하여 방향성(方向性)에 따른 수축량(收縮量)을 보면 촉단면방향(觸斷面方向)의 수축량(收縮量)은 경단방향(徑斷方向)의 수축량(收縮量)보다 큰 것은 다른 모든 나무에서 보느 결과(結果)와 같다. e) 추출량(抽出量)과의 관계를 보면 추출량(抽出量)이 많은 것일수록 추출처리(抽出處理)를 않은 것과의 수축량(收縮量)의 차이(差異)는 컸다. 7.7 팽창(膨脹)에 있어서는 a) 추출처리(抽出處理)로 그 성분(成分)을 추출(抽出)하여 낸 공시재(供試材)의 팽창량(膨脹量)은 그와 반대의 것에 비교(比較)하여 모두 팽창량(膨脹量)이 컸다. b) 재목(材木)의 방향성(方向性)에 따라보면 모두 촉단(觸斷) 방향(方向)의 팽창량(膨脹量)은 경단방향(徑斷方向)의 팽창량(膨脹量)에 비(比)하여 크다. c) 수축(收縮)에서 본것과 같이 팽창(膨脹)에 있어서도 나무의 종류(種類)에 따라 그 팽창량(膨脹量)에 차이(差異)를 볼수 있으며 그 팽창량(膨脹量)은 참나무 하이메나에아 스트로-부 소나무의 변재 그리고 동심재(同心材)의 순서(順序)도 적어졌으며, 수축량(收縮量)이 큰 것은 팽창량(膨脹量)에 있어서도 크다는 것을 실증하였다. 7.8 비중(比重)에 있어서는 a) 추출처리(抽出處理)를 한 공시재(供試材)의 비중(比重)이 추출처리(抽出處理)를 않은 공시재(供試材)의 비중(比重)에 비교(比較)하여 컸다. 이것은 비중(比重)을 결정(決定)할 때 사용(使用)된 용적(容積)에 기인(起因)하였으며 사실은 이와 반대의 결과(結果)가 나타나야 할 것이다. b) 나무의 종류별(種類別)로 보면 스트로-부 소나무의 심재(心材)는 변재보다는 그 비중(比重)이 크며 두 참나무의 비중(比重)은 소나무의 그것보다 배(倍)나 크고 하이메나에아는 그 비중(比重)이 제일 컷다. (9) 이상(以上) ; 모-든 시험결과(試驗結果)를 종합(綜合)하여 생각할 때 막연(漠然)히 재목(材木)을 물에 오래 담그어 쓴다는 생각은 오히려 잘못하면 목재(木材)의 성질(性質)을 더욱 악화(惡化)시킬 우려(憂慮)가 있으며 물에 담그어 쓰되 설탕질등(雪糖質等)으로 재목내부(材木內部)에 침투(浸透)할 수 있는 성질(性質)의 성분(成分)이 용해(溶解)되어 있는 액중(液中)에 담그어 쓰는 것은 재목(材木)의 일대 흠점(欠点)인 수축(收縮)과 팽창(膨脹) 그리고 이에 따라 일어나는 트고 휘는 일이며 틀어지는 등(等)의 흠점(欠点)을 막을 수 있다는 것을 실증하게 되었다. 만고(萬苦) 물속에 오래 담그어 쓰는 것이 다시 말하면 수용성(水溶性) 추출물(抽出物)을 빼내어 쓰는 것이 그 결과(結果)에 있어 확실히 양호(良好)하였다는 사실이 있었다면 그것은 수용성성분(水溶性成分)을 제출(提出)함으로써 균일(均一)한 수축(收縮)과 팽창(膨脹)이 일어나는데 기인(起因)하였을 것이다.
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
면화의 유용형질의 개별적 유전관계를 조기에 검정하고 이들의 상호관련성을 육종사업에 효율적으로 이용할 수 있는 기초자료를 얻고저 1969년부터 1972년까지 작물시험장목포지장실험포장(북위
본 시험은 유ㆍ무한형대두품종에 대한다수성품종의 유종 및 재배기술개선의 기초자료로서 건물생산 및 제 형질간의 상호관계를 밝힐 목적으로 파종기, 재식밀도 및 시비수준이 다른 조건에서 광교, 동북태 및 수계5001를 유한형품종으로 그리고 Shelby, SRF-300 및 Harosoy를 무한형품종으로 하여 1972년부터 2개년에 걸쳐 작물시험장(수원)에서 실시하였는데 그 결과를 요약하면 다음과 같다. 1. 개화기에 있어서의 건물중, CGR 및 LAI는 품종, 파종기, 시비수준을 막론하고 밀식할수록 증가하였고 개화기가 빠른 무한형품종들은 유한형품종보다 현저히 떨어졌으나 정엽전개기에는 오히려 유한형보다 무한형이 더 높거나 거의 같은 수준을 나타냈다. 2. 파종기별로 본 개화기의 건물중은 유ㆍ무한형 모두 5월 21일구와 6월 15일구가 거의 비슷하나 7월 10일구의 건물중은 낮았으며 시비수준이 높을수록 개화기에는 CGR을 비롯하여 건물중과 LAI도 높았다. 3. 엽면적지수(LAI)는 동일군내에서 품종간차이도 상당히 컸으나 무한형품종은 파종기, 재식밀도 및 시비수준을 막론하고 유한형품종보다 떨어지는데도 종실수량은 별로 떨어지지 않았다. 4. 조식 및 증비의 경우에는 밀식을 하면 정엽전개기 이후에 엽과 엽병부분의 낙하가 많으나 소식인 경우 또는 만파(7월 10일)에서는 엽과 엽병의 낙하가 적은 경향이 뚜렷하였다. 5. 식물체부분별로 보면 경중비율은 밀식할수록 높아지고 반면 엽중비율은 소식할수록 높아졌으며 만파할수록 경중과 엽병비율은 떨어지고 엽중비율은 높아지는 경향이었다. 6. 정엽전개기에 있어서 유한형품종은 맥중비율이 5월 21일구에서 25내외, 6월 15일구에서 8%내외, 7월 10일구에서는 9%내외이어서 매우 적은 반면 무한형품종은 5월 21일구에서 6%내외, 6월 15일구에서 14%내외, 그리고 7월 10일구에서는 21%내외로 매우 컸다. 7. 광교는 다비조건에서 도복된 후에도 황화낙엽이 적고 생육이 회복되나 SRF-300은 생육이 회복되지 않았다. 8. 종실수량은 5월 21일구가 가장 높았으나 6월 15일구와 별로 차이가 없고 7월 10일구는 감소가 컸는데 유한형품종들은 만파에 의한 감소정도가 비교적 적고 무한형품종은 그 정도가 컸었다. 9. 재식밀도의 적정수준은 수량면으로 보았을 때 5월 21일구에서는 a당 1,250∼2500개체, 6월 15일구에서는 2,500개체, 그리고 7월 10일구에서는 3,333개체수준이었다. 10. 전품종에 있어서 정엽전개기의 건물중과 LAI 그리고 맥비만기의 건물중은 수량과 높은 상관을 나타냈고 유한형품종에 있어서 최고의 수량을 기대할 수 있는 건물중의 적정선은 개화기때에 a당 25kg, 정엽전개기때에 50kg내외였으며 무한형품종에 있어서는 맥비만기의 LAI는 4∼5, 그리고 맥비만기의 건물중은 a당 80kg내외이었다. 11. 밀식을 하면 경장은 커지고 경태와 분지 및 절수는 적어져서 주경비율이 높아지고 절간장이 길어졌다. 경중, 절수, 맥수 및 종실수량의 주경비율은 밀식할수록 그리고 만파한 것이 높았으며 무한형이 유한형보다 높았다. 12. 밀식 또는 만파의 경우에는 맥수나 종실수량의 주경비율이 높아서 주경의존도가 높은 품종이 유리한 것으로 보였다. 13. 개화기와 정엽전개기의 LAI는 유ㆍ무한형 모두 단위면적당 총절수, 건물중 및 건경중과 높은 상관을 보였고 개화기의 LAI는 유한형의 경장 및 a당 맥수와의 상관에는 유의차가 없었으나 무한형의 경장 및 a당맥수와는 고도의 유의상관을 보였다. 14. 건물중은 LAI외에 CGR, 경장 그리고 a당 절수, 맥수 및 건경중과 높은 상관을 보였으나 경태와는 유의적인 상관이 없었다. 15. 도복지수는 LAI, 건물중, 경장 및 건경중과 높은 유의상관이 있었고 경태와는 무한형품조에 있어서 고도의 부의 상관을 보였으나 유한형품종에서는 유의상관이 없었으며 유한형품종에서는 수량과 고도의 정의 상관을 보였다. 또한 도복지수는 주경의 평균절간장과 고도의 정의 상관이 있었다. 16. 100립중은 밀식 및 만파 그리고 무비조건에서 떨어지는 경향이었고 주경보다 분지의 100립중이 낮았다. 17. 단백질함량은 어떤 재배조건에서도 변화가 거의 없으나 지방함량은 만파할 때 감소하는 경향이 뚜렷하였다.