• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.332-335
• /
• 2007

This paper presents a theoretical approach to describe the vibration characteristics of a piezoelectric shell transducer. Governing equations for the motion of the piezoelectric shell are classified and simplified according to the boundary conditions. Applied mechanical and electrical boundary conditions have yielded each characteristic equation for circumferential, longitudinal, and radial motions of the piezoelectric shell transducer. Theoretical calculations of the resonance frequencies have been compared with the results obtained by the experiment and have shown a good agreement.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.197.2-197.2
• /
• 2011

Preliminary analysis on the modeling conditions and the simulation results is conducted only to evaluate the correctness of the simulation configuration further to apply for the LASGIT project. Except for the unrealistic modeling conditions for the relations of capillary pressure and relative permeability against water saturation used previously, the simulation results successfully demonstrate Helium propagation typical for two-phase flow. Further elaborated simulation with more realistic parameters should complete the weak points of the preliminary work.

• 환경위생공학
• /
• 제14권4호
• /
• pp.69-76
• /
• 1999

This research was carried but to investigate the characteristics of mist removal with the change of operating conditions in the plasma reactor of impulse streamer corona based on the distribution of particle size measured by laser diffraction spectrometers. The operating conditions in this experiment were power of impulse streamer corona, gas velocity, collection time, and SOx/NOx concentration. The collection efficiency T(d) was estimated by distribution of particle size in the collection zone through the advanced model.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1273-1275
• /
• 1996

Moisture measurements of s intering materials were performed using the simulator which can simulate various conditions taking place at the belt-conveyor of sintering process. The moisture sensor used in this experiment is NIR moisture meter(JE-330, KETT Electric Lab.). Using the simulator, we measured the moisture contents of sintering materials at different conditions. We found that the moisture content decreased as the rotation speed increased and the size of the sintering materials became smaller.

• 전기의세계
• /
• 제19권2호
• /
• pp.12-17
• /
• 1970

In the design of electrical equipment insulation, it is customary to place pressboard and other insulating material at right angle to the electrical discharge path, which is based on the insulation tests performed on equipment under various conditions such as types of insulation, applied voltage and other unique situations. Since electrical equipment manufacturing started only recently, there is a scarcity of available data on insulation problems, which make it difficult for the design engineers. The author untook this study to provide such analytical design data for various conditions based on the experiment conducted on the equipment being manufactured, thus reducing possible errors in the process.

• 한국관개배수논문집
• /
• 제7권2호
• /
• pp.26-33
• /
• 2000

This study was carried out to investigate the water requirement of green peppers which are cultivated in a greenhouse under the different soil water conditions. The meteorological conditions during the experiment period was not predominantly different fro

• 한국약용작물학회지
• /
• 제7권2호
• /
• pp.138-142
• /
• 1999

지황(Rehmannia glutinosa)의 국내 수요증가와 재배확대에 따른 우량 신품종 육성의 기초자료를 얻고자 몇몇 지황속 식물의 작물학적 특성을 조사하고, 재배환경이 지황의 생육 및 수량에 미치는 영향을 조사한 결과는 다음과 같다. 지황종 식물의 학명은 Rehmannia glutinosa Libosc, Rehmannia glutinosa Libosc var. purpurea Makino 및 Rehmannia glutinosa Libosch var. hueichingensis (Chao et Schih) Hsiao 등으로 지상부 생육특성과 뿌리의 작물학적인 형태는 다양한 차이를 보였다. 중국으로부터 도입 육성한 지황 1호는 근경이 굵고 다수성이고 일본종은 가늘며 깊게 신장하는 특성을 보였으며 국내재래종은 중간형질을 지니고 있었다. 지황1호를 공시하여 적정재배 환경을 조사한 결과 지황의 근비대 생장은 7월 중하순경에 근중과 근경 모두 급속하게 증가함을 보였고, 일장과 온도는 제한된 3처리중 13시간 일장에서 주간 $23^{\circ}C$ 야간 $18^{\circ}C$ 처리에서 근비대 생장이 가장 양호 하였다. 토양은 양토조건에서 2,144kg/10a로 가장 높은 수량성을 보였고 토양수분이 $60{\sim}70%$에서 근비대 생장이 양호하였다.

• 방사성폐기물학회지
• /
• 제14권2호
• /
• pp.113-122
• /
• 2016

본 연구에서는 항 내부에서 부하되는 오염물질이 파랑 및 흐름 조건으로 인하여 항외로 유출되는 과정을 수리실험을 통해 알아보았다. 월성원자력발전소 항내에 오염물질이 부하 되었을 시, 실험인자를 변화시켜가며 추적자를 활용한 흐름거동 조사를 수행하였다. 각 실험의 결과는 지수 함수에 따른 항내 오염물이 감소하는 경향이 나타나며, 항외 유출에 걸리는 시간의 기울기는 각각 다른 결과를 보여주었다. 관측된 데이터로부터 회귀식을 도출한 결과, 흐름 관측의 경우 유입되는 모터의 회전 속도 30, 20, 10 rpm에서 좌측 항내의 오염물이 50% 유출률에 도달하는 시간은 각각 2.70, 10.40, 26.39 days를 보였다. 모터의 회전속도가 30 rpm인 실험에서 유출되는 감소 추세가 가장 뚜렷하게 나타났으며, 회전속도 10 rpm인 실험에서 기울기는 완만하였다. 파랑 관측의 우측 영역의 오염물이 50% 유출률에 도달하는 시간은 4.59 days로 나타났으며, 좌측영역의 경우 15.35 days의 결과를 보였다.

• 한국세라믹학회지
• /
• 제26권4호
• /
• pp.459-470
• /
• 1989

Single crystals of rare-earth iron garnets were grown from solutions of molten lead oxide, lead fluoride, baric oxide, iron oxide, and the oxides of yttrium, samarium orgadolinium. The crystals were grown by slow cooling technique. A convenient composition was 41.8mol% PbO, 20.59mol% PbF2, 8.23mol% B2O3, 20.00mol% Fe2O3 and 10.00mol% R2O3 where R is Y, Sm or Gd. For this experiment, platinum crucibles of size 20, 30cc and a vertical siliconit tube furnace were used. The precipitation temperature of YIG was observed in the range of 115$0^{\circ}C$-112$0^{\circ}C$ and the optimum growth conditions in this experiment were determined. The nucleation rate was controlled by the holding time after the fast colling, the growth rate by the slow cooling conditiions. The form of the grown YIG crystals showed a combination of {110} and {211}, and the size of the crystals grown in this experiment was up to about 9mm under the conditions of holding time 16hour, cooling rate 2$^{\circ}C$/hr. and temperature range 115$0^{\circ}C$-90$0^{\circ}C$. The precipitatin temperature of SmIG was observed in the range of 105$0^{\circ}C$-98$0^{\circ}C$ and the size of the crystals grown in this experiment was up to about 5mm under the conditiions of holding time 16hours, cooling rate 2$^{\circ}C$/hr. and temperature range 100$0^{\circ}C$-80$0^{\circ}C$.

• Corrosion Science and Technology
• /
• 제14권5호
• /
• pp.239-246
• /
• 2015

Stainless steel is generally known to have characteristics of excellent corrosion resistance and durability, but in a marine environment it can suffer from localized corrosion due to the breakdown of passivity film due to chloride ion in seawater. Furthermore, the damage behaviors are sped up under a cavitation environment because of complex damage from electrochemical corrosion and cavitation-erosion. In this study the characteristics of electrochemical corrosion and cavitation erosion behavior were evaluated on 16.7Cr-10Ni-2Mo stainless steel under a cavitation environment in natural seawater. The electrochemical experiments have been conducted at both static conditions and dynamic conditions inducing cavitation with different current density parameters. The surface morphology and damage behaviors were compared after the experiment. After the cavitation test with time variables morphological examinations on damaged specimens were analyzed by using a scanning electron microscope and a 3D microscope. the galvanostatic experiment gave a cleaner surface morphology presented with less damage depth at high current density regions. It is due to the effect of water cavitation peening under the cavitation condition. In the cavitation experiment, with amplitude of $30{\mu}m$ and seawater temperature of $25^{\circ}C$, weight loss and cavitation-erosion damage depth were dramatically increased after 5 hours inducing cavitation.