• Journal of the Korean Institute of Landscape Architecture
• /
• v.25 no.3
• /
• pp.47-55
• /
• 1997

A vacation destination was conceptualized to be chosen through a three-stage process consisting of an early consideration set formation, a late consideration set formation, and a final selection stage. Choice criteria were defined as an individual's belief toward the relationships between perceived attributes, expected outcomes, and the destination. And these criteria were assumed to be divided into benefit-related dimension and perceived risk-related dimension. Through two pilot surveys, 13 items which have 4 factors were identified. used on 4 factor structures, the benefit-related dimension was identified to be consisted of three sub-dimensions, "historic/cultural", "escaped" and "naturalness". A longitudinal panel survey was used to test the differences of the importance of choice dimensions through the choice process. The importance of benefit-related dimension was decreased through the choice process as hypothesized except "naturalness" factor. And as hypothesized, the importance of perceived risk-related dimension was increased.

• Journal of the Ergonomics Society of Korea
• /
• v.15 no.2
• /
• pp.125-135
• /
• 1996

The purpose of this research is to measure range of virtual hip joint and lower limb joints motion such as the hip, knee and ankle joints for 47 young male students. The results of ANOVA revealed that anthropometric dimensions including weight and stature did not show any significant effects on the range of virtual hip joint and lower limb joints motion and the range of motion with two degrees of freedom at the shoulder, virtual hip and hip joints. Anthropometric dimensions such as age, weight, statuire, arm length, shoulder height and leg length were found to be lowly correlated with the range of virtual hip joint and lower limb joints motion. It is expected that the data on the range of joint motion suggested in this study can be used as a valuable input data when designing workplace, predicting human posture and reach volume, etc.

• IE interfaces
• /
• v.16 no.spc
• /
• pp.70-75
• /
• 2003

There have been dramatic technology changes in telecommunication sector during last two decades. New application services like the introduction of international mobile services, fiber optical home services and satellite personal services are expected to play a major role in the whole field of telecommunication services. In the users' viewpoint, the proper selection and the efficient application of the specific telecommunication service among the various alternatives at hand are recognized as principle means for ensuring the whole business competitiveness. Despite the definite need for the telecommunication service selection strategies, very few researches have been reported in this field. In this paper, attempts are made to identify the companies' decision factors considered in selecting the telecommunication services, to draw the strategic dimensions and categorize each company with respect to the identified dimensions, and to finally find the characteristics of each strategic group in selecting the telecommunication service.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.5
• /
• pp.27-32
• /
• 2011

Recently, a ship-shaped barge has been developed to improve the resistance performance, as well as course-keeping capability. However, the stern of the barge is still similar to a box shape, and the vortex generated at the side of the barge creates drag and yaw instability. In order to solve this problem, stern skegs are normally used. The present paper deals with the correlation between the size of the stern skegs and the barge dimensions and hull coefficient. A stern skeg was designed to prevent yaw instability and minimize any additional resistance. The resistance test and course keeping test were performed in the towing tank at Pusan National University. To determine the correlation parameters between the designed stern skeg size and barge dimensions, a parametric study was also performed. Based on the experimental data from five barges, the optimum skeg dimensions were successfully derived. It is expected that the validation of the present study will be carried out by further experiments and computational comparisons in the near future.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.16 no.27
• /
• pp.73-82
• /
• 1993

In this paper, We determine the expected travel time for several forks Storage/Retrieval machine which is allowed multiple stops in aisle. When throughput is increased, We propose adding to fork number of each S/R machine rather than adding to number of S/R machine, We also describe such a model which determines the optimal number of each several forks S/R machine subject to constraints on the hourly throughput and warehouse dimensions. Numerical example is presented to compare warehouse shapes against each single fork, twin forks, triple forks S/R machine for various throughput values.

• Journal of Advanced Marine Engineering and Technology
• /
• v.14 no.1
• /
• pp.90-98
• /
• 1990

The liquid ejector, having no moving, lubricating and leaking parts, is widely used as the various pumps because of its high working confidence and simplicity. Previously, computer aided design program for the small-sized liquid ejector was developed based on the one-dimensional flow analysis and the systematical laboratory level experiments. Through the present research, it is confirmed that the previously developed computer program to getermine the main design dimensions and to calculate the expected performance curve is satisfactorily applied to design the large liquid ejectors.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.143-145
• /
• 1996

A new method of fabricating 3-dimensional patterns on single crystal silicon is presented in this paper. The method utlizes both chemical and mechanical reactions to make patterns with dimensions of few microns in width and submicron in height. The primaryadvantage ofthis new method over conventional methods of making patterns on silicon lies in its cost effectiveness and speed. The process introduced in this paper is a maskless process and does not reauire expensive capital investment. It is expected that this method can be employed for flexible and cost effective fabrication of micro-machine components in MEMS application.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.856-859
• /
• 2002

A system for high-resolution analysis of defective elementary cell (R, G or B) on Flat Panel Display (FPD) is described. Based on multiple acquisitions of low-resolution shifted images of the display, our system doesn't require a high-resolution sensor neither tedious alignment of the display, and will remain up to date even facing an important increase of the display dimensions. Our process, highly automated and thus flexible and robust, is expected to perform a full analysis in less than 60s. It is mainly intended for production tests and display classification by manufacturers.

• Journal of Korean Society for Quality Management
• /
• v.29 no.1
• /
• pp.173-183
• /
• 2001

This paper investigates service quality in the automobile service industry. The model used to study service quality in the domestic automobile industry is "SERVQUAL", introduced by Parasuraman, Zeithaml and Berry. Using this model, we survey consumer′s expected and perceived service qualities. The gap between these qualities is analyzed in five quality dimensions. We test whether these gap scores are different depending on the service providing company.

• Laser Solutions
• /
• v.4 no.3
• /
• pp.40-44
• /
• 2001

Microbump formation during CO$_2$ laser texturing of glass substrates is examined in this paper. Experimental results show that different bump shapes (dome-shaped, with a central dimple, and with a peripheral rim) are generated depending on the laser fluence. A theoretical model for the process is suggested based on thermoelastic behavior but limited only to the dome-shaped bump. The dimensions (maximum height and base area) of the bump shows a logarithmic dependence on laser fluence as expected from the theory. Numerical computation reveals that the effect of thermal diffusion is not negligible for relatively long laser pulses.