• 소성∙가공
• /
• 제16권7호
• /
• pp.521-529
• /
• 2007

This paper is concerned with the analysis on the surface expansion of AA 2024 and AA 1100 aluminum alloys in backward extrusion process. Due to heavy surface expansion appeared usually in the backward can extrusion process, the tribological conditions along the interface between the material and the punch land are very severe. In the present study, the surface expansion is analyzed especially under various process conditions. The main goal of this study is to investigate the influence of degree of reduction in height, geometries of punch nose, friction and hardening characteristics of different aluminum alloys on the material flow and thus on the surface expansion on the working material. Two different materials are selected for investigation as model materials and they are AA 2024 and AA 1100 aluminum alloys. The geometrical parameters employed in analysis include punch corner radius and punch nose angle. The geometry of punch follows basically the recommendation of ICFG and some variations of punch geometry are adopted to obtain quantitative information on the effect of geometrical parameters on material flow. Extensive simulation has been conducted by applying the rigid-plastic finite element method to the backward can extrusion process under different geometrical, material, and interface conditions. The simulation results are summarized in terms of surface expansion at different reduction in height, deformation patterns including pressure distributions along the interface between workpiece and punch, comparison of surface expansion between two model materials, geometrical and interfacial parametric effects on surface expansion, and load-stroke relationships.

• 한국세라믹학회지
• /
• 제37권2호
• /
• pp.122-127
• /
• 2000

The thermal expansion, thermal stability, mechanical strength and infrared radiative property of Al2TiO5-clay composites, prepared from synthesized Al2TiO5 and clay, were investigated to develop a material for far infrared radiators. The emittance of composites containing 10~50 wt% clay, heated at 1,20$0^{\circ}C$ for 3 h, increased with increasing clay content and emittance was about 0.3 and 0.92 in the ranges of 3,400~2,500 cm-1 and 2,500~400cm-1, respectively. The bulk density and bending strength of the Al2TiO5-clay composites increased with increasing clay content. 50 wt% Al2TiO5-50 wt% clay composite, heat-treated at 1,20$0^{\circ}C$, had an adequate strength for infrared radiators; 80 MPa. The degree of thermal expansion hysteresis decreased with increasing clay content and the mean thermal expansion coefficient increased with increasing clay content. The thermal expansion coefficient of 50 wt% Al2TiO5-50 wt% clay composite heated at 1,20$0^{\circ}C$ was 5.78$\times$10-6/$^{\circ}C$.

• 한국기계가공학회지
• /
• 제18권11호
• /
• pp.63-68
• /
• 2019

The dimensional quality of flexible foams is often difficult to be evaluated through general machine vision inspection methods due to the free deformation of the outer shape. For the evaluation of the dimensions of flexible foams, methods of estimating the size of the product through the expansion rate of the product surface are evaluated. Specimens with various dimensions and surface gratings are prepared, and the degree of surface expansion is measured through machine vision. The correlation, between the measured surface grid size and the actual size of test specimens, is analyzed. We further analyze the correlation between the size of test specimens and the position of the surface grid. This study provides a basis for estimating the actual dimensions of specimens by measuring the surface expansion of flexible foams.

• 대한수학회보
• /
• 제53권3호
• /
• pp.699-709
• /
• 2016

Our paper is devoted to the study of certain diophantine equations on the ring of polynomials over a finite field, which are intimately related to algebraic formal power series which have partial quotients of unbounded degree in their continued fraction expansion. In particular it is shown that there are Pisot formal power series with degree greater than 2, having infinitely many large partial quotients in their simple continued fraction expansions. This generalizes an earlier result of Baum and Sweet for algebraic formal power series.

• 한국콘텐츠학회논문지
• /
• 제14권7호
• /
• pp.161-168
• /
• 2014

지방분권은 국가와 지방자치단체의 권한과 책임을 합리적으로 배분하는 것으로 본 논문은 한국형 분권국가 추진을 위해 우선, 분권화와 관련된 선행연구를 고찰하였다. 다음으로 학자나 전문가를 대상으로 지방분권 정도의 평가와 분권방향 등을 살펴보았다. 마지막으로 지방분권을 위한 과제를 도출하였다. 지방분권 과제는, 첫째, 조직구성의 자율성 확대이다. 지방자치단체의 조직구성은 지방의 직무의 내용에 따라 정해지는 것이 바람직하다. 둘째, 인사운영(정원운영)의 자율권 확보이다. 지방자치단체의 정원과 인력관리는 중앙이 획일적으로 통제하기보다는 지방이 주체적으로 처리하는 것이다. 또한 이에 대한 견제와 감독은 당해 지방의회와 시민단체, 지역 주민에게 맡기는 것이 필요하다. 셋째, 재정분권 확대이다. 재정분권 확대는 우선, 자치재정권의 확충으로 법률이 정하는 범위 내에서 조례에 의해 자율적으로 세율을 결정할 수 있어야 한다. 다음으로 국세의 지방세 전환을 통한 재정분권 확대 등이 필요하다. 또한 재정분권의 확대를 위해 지방소득세와 지방소비세의 확대가 필요하다. 지방분권은 어느 한 분야의 분권으로 이루어지는 것이 아니고 조직, 인사, 재정 등 다양한 분야의 기능을 이양하는 등 많은 노력이 필요하다.

• 한국전산유체공학회지
• /
• 제21권1호
• /
• pp.94-102
• /
• 2016

The present paper deals with accuracy improvement of a bleed boundary condition model used to improve the performance of supersonic inlets. In order to accurately predict the amount of bleed mass flow rates, this study performs a scaling of sonic flow coefficient data for 90-degree bleed holes in consideration of Prandtl-Meyer expansion theory. Furthermore, it is assumed that porosity varies with stream-wise location of the porous bleed plate to accurately predict downstream boundary layer profiles. The bleed boundary condition model is demonstrated through Computational Fluid Dynamics(CFD) simulations of bleed flows on a flat plate with/without an oblique shock. As a result, the bleed model shows the improved accuracy of bleed mass rates and downstream boundary layer profiles.

• 한국안전학회지
• /
• 제12권4호
• /
• pp.191-200
• /
• 1997

This paper discusses prediction of the sound pressure level produced by simple engine exhaust systems(plain pipe, plain expansion chamber pipe, plain expansion chamber with internally extended inlet and outlet pipe, perforated pipe enclosed in a plain expansion chamber) and a computer program has been developed which predicts the sound pressure level and the frequency spectrum. The program utilizes unsteady flow gas dynamic theory and acoustic theory to predict the pressure-time history in the exhaust system and the mass flow rate-time history at the open end of the system and the sound pressure levels(1/3 Octave band levels) and the frequency spectrum in semi-anechoic room. The predictions are compared with measured levels and show a high degree of correlation.

• KDI Journal of Economic Policy
• /
• 제42권1호
• /
• pp.31-56
• /
• 2020

Does financial development contribute to economic growth? The literature finds that an expansion in financial resources is useful for economic growth if the degree of financial development is under a certain threshold; otherwise, the expansion is detrimental to growth. Almost every published study, however, considers country-panel data. Accordingly, the results are not directly applicable to the Korean economy. By examining Korean time-series data, this paper finds that there is an inverse U-shaped relationship between the per capita real GDP growth rate and private credit (as a percentage of nominal GDP)-a well-known measure of quantitative financial development, where the threshold is 171.5%. This paper also finds that private credit is positively associated with economic growth if the share of household credit out of private credit is less than 46.9%; otherwise, private credit is negatively associated with economic growth. As of 2016, the ratio of private credit to GDP and the ratio of household credit to private credit are both higher than the corresponding thresholds, which implies that policymakers should place more emphasis on qualitative financial development than on a quantitative expansion of financial resources.

• 대한수학회보
• /
• 제46권1호
• /
• pp.183-198
• /
• 2009

In this paper, we derive a characterization of orthonormal balanced multiwavelets of order p in terms of the continuous moments of the multiscaling function $\phi$. As a result, the continuous moments satisfy the discrete polynomial preserving properties of order p (or degree p - 1) for orthonormal balanced multiwavelets. We derive polynomial reproduction formula of degree p - 1 in terms of continuous moments for orthonormal balanced multiwavelets of order p. Balancing of order p implies that the series of scaling functions with the discrete-time monomials as expansion coefficients is a polynomial of degree p - 1. We derive an algorithm for computing the polynomial of degree p - 1.

• 한국환경복원기술학회지
• /
• 제21권3호
• /
• pp.57-65
• /
• 2018

The study is conducted to establish the National Protected Areas Integrated System(NPAIS) which includes National Protected Areas(NPAs) and other conservation measures in terms of effective ways for biodiversity conservation. Additionally, it is carried out to evaluate progress toward quantitative expansion goals in Aichi biodiversity Target 11. The NPAIS consists of NPAs and other effective area-based conservation measures(OECMs). There are two different types of OECMs. OECMs type I, including water-source protection Areas(WPA), riparian zones(RZ), fishery-resource protection zones (FPZ), and urban natural park zones(UNPZ), is a potential protected area which is recommended to be incorporated into the NPAs for effective management. OECMs type II means development restriction zones(DRZ), natural recreation forests(NRF), and buffer zones for Korea national arboretum(BKNA). As a result of evaluating the quantitative expansion goals of the NPAIS, terrestrial and inland water protected areas exceed 17% of the quantitative goal in Aichi biodiversity Target 11. The larger the area of individual OECMs and the lower the degree of overlap with NPAs, the higher the contribution of them to the terrestrial and inland water protected areas. DRZ contributes to enlarge more than 3% of quantitative expansion. And RZ and NRF contribute more than 1%. The marine protected areas are expanded by $1,425km^2$ through FPZ, but the expanded area is very small as comparing with the total marine area. It adds only 0.321% to the quantitative expansion. The rest of OECMs also has very poor quantitative expansion contributions in the marine area. Consequently, the NPAIS is effective for quantitative expansion of land areas, but not for marine areas.