• 설비공학논문집
• /
• 제12권10호
• /
• pp.925-931
• /
• 2000

Refrigerating ability of vapor compression refrigerator is decided by the harmonic work of it's components such as compressor, condenser, evaporator, expansion device, and so on. In this study, choosing refrigerant injectors as a new one of expansion device, temperature change of the cold room, ice freezing ability, and power consumption on flowrate of injector and refrigerant charging condition are evaluated experimentally. As the results of this study, it is verified that the spray injection type refrigeration system has some merits according to the flowrate and spray pattern of injector and charging quantum of refrigerant. And there are some design factors such as spray pattern and shape of spray chamber to utilize and fabricate this refrigerant injection type refrigerator.

• 한국기계가공학회지
• /
• 제18권4호
• /
• pp.41-47
• /
• 2019

The advent of highly integrated, high-power electronics requires low a coefficient of thermal expansion performance to prevent delamination between the heat dissipation material and substrate. This paper reports a preliminary study on the manufacturing technology of gas reaction control composite material, focusing on the prediction of the thermal expansion coefficients of Al-AlN composite materials. We obtained numerical equivalent property values by using finite element analysis and compared the values with theoretical formulas. Al-AlN should become the optimal composite material when the proportion of the reinforcing phase is approximately 0.45.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.989-989
• /
• 2006

• 한국정밀공학회지
• /
• 제9권4호
• /
• pp.90-99
• /
• 1992

In resent year Laser Speckle and its development have enabled surface deformation of engineering components and materials to be interferometrically examined. Laser Speckle- Pettern Interferometry Method is a very useful method for measuring In-plane components of displacement. In measuring thermal expansion coefficient, the various problems generated were established, and the measuring limitation examined. Metarial INCONEL 601 was used in experiments. Specimen was heated to the high temperature(100$0^{\circ}C$) by diong current to the direct two specimen. Then, those problems appear to the influence of back-ground radiation by the heated specimen, the influence by air turbulence, the oxidation of specimen. The color monitor and interference filter prevented the back-ground radiation by rad heat. The oxidation occuring in specimen itself was not generated by the being acid-proof excellence of material INCONEL 601. Yet, in this experiments, the serious problems are the oxidation of specimen and influence by air turbulence. By more reserching these problems forward, it is helpful that the thermal expansion coefficient of many materials is directly measured under high temperature.

• Journal of Biosystems Engineering
• /
• 제9권2호
• /
• pp.89-96
• /
• 1984

This study was intended to search the thermal properties of rice which are necessary in preventing qualitative and quantitative losses in the drying and milling processes. First, the coefficient of cubical thermal expansion of brown rice was measured, which is required for analyzing the internal stress of rice, and then theoretical thermal and moisture stresses were calculated. The results are summarized as follows: 1. The coefficient of cubical thermal expansion of brown rice was about $2.81{\times}10^{-4}/^{\circ}C$ in the temperature range of $10^{\circ}C-60^{\circ}C$. 2. When the shape of brown rice was assumed to be a sphere or a cylinder, maximum thermal stress due to temperature change of $20^{\circ}C-60^{\circ}C$ was in the range of $25-100kg/cm^2$. And maximum moisture stress was in the range of $450-650kg/cm^2$ when the drying temperature was $35^{\circ}C$, initial and final moisture contents of brown rice were 20% and 14% (w.b.), and the moisture diffusion coefficient was assumed to be $6.79{\times}10^{-4}cm^2/hr$. 3. Consequently, it was concluded that crack formation in a rice kernel is mainly caused by moisture stress.

• 한국해양공학회지
• /
• 제27권5호
• /
• pp.51-62
• /
• 2013

The water wave interactions on any three-dimensional structure of arbitrary geometry can be calculated numerically through the use of source distribution or Green's function techniques. However, such a method can be computationally expensive. In the present study, the water wave interactions in floating circular cylinder arrays were investigated numerically using the eigenfunction expansion method with the three- dimensional potential theory to reduce the computational expense. The wave excitation force, added mass coefficient, radiation damping coefficient, and wave run-up are presented with the water wave interactions in an array of 5 or 9 cylinders. The effects of the number of cylinders and the spacing between them are examined because the water wave interactions in floating circular cylinder arrays are significantly dependent upon these.

• 한국표면공학회지
• /
• 제47권6호
• /
• pp.293-296
• /
• 2014

Fe-Ni has been of great interest because it is known as one of low thermal expansion alloys as various application areas. This alloy was fabricated by electroforming process, and effect of heat treatment on thermal expansion and hardness was investigated. Nano-crystalline structure of 13.3 - 63.5 nm in size was observed in the as-deposited alloy. To investigate the effect of heat treatment on grain growth and mechanical/thermal properties, we conducted hardness and coefficient of thermal expansion (CTE). From this, we confirmed these properties were varied by heat treatment. In this nano-crystalline alloy, we could observe abnormal behavior in thermal expansion between $350-400^{\circ}C$. Additionally, an abrupt change in hardness has also been observed. However, once the grains grow up to micro-sized the mechanical and thermal properties mentioned above were stabilized similar to those of bulk alloys due to heat treatment.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권9호
• /
• pp.949-953
• /
• 1996

In this paper, the cathode materials of solid oxide fuel cell were fabricated, and the analysis of TG/DTA, XRD, thermal expansion and electric conductivity were investigated. As a result, thermal expansion coefficient of LSM was not quite different from that of electrolyte. And the performance of LSM(x=0.4) was more excellent than the others.

• 항공우주기술
• /
• 제13권1호
• /
• pp.76-85
• /
• 2014

본 연구에서는 다양한 열팽창계수 예측기법을 활용해서 섬유강화 복합재료 라미나 등가 열팽창계수 예측을 수행하였다. 등가열팽창계수를 예측하는 많은 식들이 제안되어 왔지만 사용대상에 따라 제약이 있거나, 예측결과가 시험결과와 잘 일치하지 않는 문제점을 갖고 있다. 본 연구에서 실제 복합재료 형상과 유사한 대표체적요소를 선정하여 유한요소 모델링을 수행하고 여기에 주기적 경계조건을 부여하여 재료의 등가열팽창계수를 예측하였다. 예측결과를 기존의 예측식 및 시험결과와 비교하여 그 성능을 검증하였으며, 별추적기 지지구조물의 열지향오차해석을 수행하고 다양한 예측물성을 따라 그 정확도를 검토하였다.

• 마이크로전자및패키징학회지
• /
• 제27권1호
• /
• pp.67-73
• /
• 2020

본 논문에서는 FEM(유한요소) 기법을 사용하여 FCCSP용 임베디드 PCB의 캐비티 구조와 프리프레그 재료의 종류에 따라 PCB에서 발생한 warpage와 von Mises 응력 해석을 수행하였다. 유한요소 해석에는 1/2 substrate 모델과 정적해석이 적용되었다. warpage 해석 결과에 의하면 칩이 실장되는 캐비티와 칩의 간격이 증가할수록 warpage가 증가하였고, 탄성계수와 열팽창계수가 높은 프리프레그 재료를 적용했을 때 warpage가 증가하였다. 응력의 해석결과에 따르면 칩이 실장되는 캐비티와 칩의 간격의 영향은 프리프레그 재료에 따라 다르게 나타났다. 즉 열팽창계수가 코어재료보다 월등히 높은 재료를 적용했을 때 칩이 실장되는 캐비티와 칩의 간격이 증가할수록 응력이 증가하였고, 열팽창계수가 코어재료보다 낮은 프리프레그를 적용하면 응력이 감소하였다. 이와 같은 결과는 신뢰성 관점에서 실장된 칩이 실장되는 캐비티의 구조와 프리프레그 재료간 상관관계가 있음을 시사하고 있다.