• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.487-494
• /
• 1993

In order to establish a fully automatized pest control in the a greenhouse , the authors developed a prototype of microcomputer installed spraying vehicle which traveled along the furrows. Since a power sprayer mounted on the vehicle was driven by gasoline engine, plants grown in the greenhouse might be injured by the gas exhausted from the engine. Thus , effects of exhausted gas on photosynthetic rate and the shedding of flowers and buds of plants were examined. At first, effects of exhausted gas on photosynthetic rate of potted sweet pepper (Capsicum annuum L.) and eggplant(Solanum melongena L.) plants were examined. In a closed vinyl house the engine was operated for 5 minutes and plants were exposed to the gas for 2hours in the daytime on a fine day. Photosynthetic rate did not significantly decreased by the treatment in both species. Secondly, effects of ehtylene on the shedding of flowers and buds of sesame (Sesamum indicum L. ) were examined. In the closed and partiall opened vinyl house, the engine was operated for 5 minutes and potted sesame plants were exposed to the gas for 12 hours in the night. In partially opened vinyl house, ethylene concentration decreased to 0 ppm 3 hours after the engine was stopped and flower and bud did not shed. In contrast, when vinyl house was closed ethylene concentration was 0.75 pm even 12 hours after the engine was stopped and flowers and buds shed markedly and epinasty was observed in upper young leaves. As mentioned above , it was revealed that injury of plants in the greenhouse caused by the gas exhausted from a gasoline engine could be prevented by providing suitable ventilation.

• 한국가스학회지
• /
• 제4권4호
• /
• pp.13-19
• /
• 2000

지구환경 보존 및 화석연료의 고갈에 대한 대책으로 미활용 에너지원에 대한 연구들이 진행되고 있다. 본 연구는 이러한 관점에서 지하철에서 배기되는 공기를 공기열원 히트펌프의 열원으로 이용할 수 있는가를 알아보기 위해 서울 지하철 5호선 Y역을 대상역으로 선정하여 터널내의 공기온도, 배열량을 시뮬레이션하였다. 이 배열량을 난방용 열원으로 히트펌프에 이용했을 경우 전력소비량과 대기를 직접 이용하는 히트펌프의 전력소비량을 계산하여 에너지 절약량을 검토하였으며, 여름철 냉방 유무 및 환기시간에 따른 터널내 온열환경을 파악하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.223-226
• /
• 2004

The thesis examined the charactcri:stlC of pollutants exhausted from LNG facilities. So, combustion gas and concentration of greenhouse gas exhausted from gas boiler for home use, furnace facilities, electric power facilities, boiler for industrial use and boiler for heating fueled LNG is measured. And the exhaust factor of pollutants is produced by classify of pollutants in detail. And this exhaust factor is compared and investigated with data of a foreign nations.

• 설비공학논문집
• /
• 제15권7호
• /
• pp.557-562
• /
• 2003

Flue gas from apartment heating gas boiler is exhausted outside through an exhaust duct mounted horizontally in a vertical row on the wall. The flue gas includes nitrogen-oxides (NOx) and carbon monoxide. To investigate the possible entrainment of the flue gas into the apartments through the windows, a large eddy simulation (LES) based numerical method is utilized. Distribution of the velocity intensity and temperature around the exhaust ducts is presented for three numerical parameters: exhaust velocity, temperature of the flue gas, and exhaust duct length. The flow field visualized with particles inserted at the ends of the ducts is also presented. The results clearly show that the exhausted flue gas may flow into the apartments when the windows are open.

• 분석과학
• /
• 제18권5호
• /
• pp.419-424
• /
• 2005

최근 환경 잔류성 유기오염 물질과 내분비계 장애물질로 지정된 다이옥신은 가장 중요한 환경 물질로 취급되어 인체위해성 평가, 배출 오염원 측정 및 분석 방법, 저감대책, 환경에의 농도 및 영향 평가를 위한 다양한 연구가 수행되고 있다. 폐기물 소각 등 모든 연소과정에서 주로 생성된 후 대기 순환 등을 통하여 환경 중에 확산된 다이옥신 등은 토양에 축적된다. 본 연구에서는 산업 폐기물 소각장 배출 가스, 생활 쓰레기 소각장 배출 가스 및 대기 그리고 토양의 시료로부터 다이옥신의 이성질체 분포에 대한 상관성을 비교하였다. PCDDs와 PCDFs를 OCDD를 기준으로 하여 그 비율에 기초하여 곡선을 작성하여 그 형태로부터 유사성을 비교한 결과 산업 폐기물 소각장 배출 가스와 대기 중에서의 이성질체 분포 곡률과 비율이 거의 일치함을 볼 수 있다. PCDDs와 PCDFs의 결과를 비교하였을 때 서로 유사한 곡률과 비율에 대한 결론을 나타내었으며 따라서 환경 중에 노출되는 다이옥신은 생활 쓰레기 소각장 배출 가스보다는 산업 폐기물 소각장 배출가스에 좀 더 의존적임을 알 수 있었다. 토양 시료의 경우 농약 등 다른 오염원의 가능성 및 자연 분해 정도를 배제할 수는 없지만 곡률의 형태는 배출가스들과 유사함을 보여 토양 오염 또한 소각장 배출 가스들에 기인함을 유추할 수 있었다.

• 한국전산유체공학회지
• /
• 제9권3호
• /
• pp.49-56
• /
• 2004

A heated and expanded helium is used to pressurize liquid propellants in propellant tanks of propulsion system of liquid propellant launch vehicles. To produce a heated and expanded helium, an hot-gas heat exchanger is used by utilizing heat source from an exhausted gas, which was generated in a gas generator to operate turbine of turbo-pump and dumped out through an exhaust duct of engine. Both experimental and numerical approaches of hot-gas heat exchanger design were conducted in the present study. Experimentally, siliconites - electrical resistance types - were used to simulate the full heat condition instead of an exhausted gas. Cryogenic heat exchangers, which were immersed in a liquid nitrogen pool, were used to feed cryogenic gaseous helium in a hot-gas heat exchanger. Numerical simulation was made using commercially utilized solver - Fluent V.6.0 - to validate experimental results. Helically coiled stainless steel pipe and stainless steel exhausted duct were consisted of tetrahedron unstructured mesh. Helium was a working fluid Inside helical heat coil and regarded as an ideal gas. Realizable k-』 turbulent modeling was adopted to take turbulent mixing effects in consideration. Comparisons between experimental results and numerical solutions are Presented. It is observed that a resulted hot-gas heat exchanger design is reliable based on the comparison of both results.

• 한국수소및신에너지학회논문집
• /
• 제14권3호
• /
• pp.229-235
• /
• 2003

A 50W class MCFC stack was operated in order to test a new design of the circular shaped separator. in the new design, the anode gas was supplied into the stack and was exhausted out of the stack after the anode reaction. The exhausted gas was reacted with the cathode gas supplied with excess oxygen in the vessel in which the stack was placed. Then the reacted gas flowed into the cathode side of the stack and was exhausted through the outlet located in the center of the stack. The average voltage of the single cells in the stack was 0.835V under the current density of $150mA/cm^2$, initially, and the degradation rate of the stack voltage was 1.7%/1,000h. High stack voltage with good stability of the present stack was due to the small temperature gradient in the stack. The small temperature gradient as well as the easiness of temperature control was the result of the new configuration of the separator which utilized the heat of the combustion reaction between anode outlet gas and the cathode inlet gas for heating the stack.

• 항공우주기술
• /
• 제7권1호
• /
• pp.136-141
• /
• 2008

원통형 초음속 디퓨저를 사용하면 추진기관에서 발생하는 고온 연소가스의 모맨텀을 이용하여 비교적 간단하게 안정된 고고도 환경을 모사할 수 있다. 디퓨저를 이용한 고공모사 시험에서 추진기관의 연소시간이 긴 경우, 고온의 연소가스가 디퓨저 내 벽면에 직접 탈기 때문에 반복적인 사용을 위해 이 부위에 대한 냉각대책이 필요하다. 디퓨저 내부로 분사되는 냉각수가 디퓨저 작동특성에 미치는 영향을 파악하고자 축소형 연소실험을 수행하였으며, 본 논문은 실험방법과 그 결과에 대해 기술하고 있다. 고체 추진제를 연료로 하는 가스발생기를 이용하여 추진기관을 모사하였으며, 일반 수돗물을 냉각제로 사용하였다.

• 설비공학논문집
• /
• 제22권4호
• /
• pp.248-257
• /
• 2010

An exhausted heat recovery system for a small gas engine cogeneration plant was investigated. The system was designed and built in a 300 kW class cogeneration demonstrative system. The basic performance was tested depending on load variation, and installed to a field site as a bottoming heat and power supply system. The exhaust gas heat exchangers (EGHXs) in shell-and-tube type and shell-and-plate type were tested. The entire efficiency of the cogeneration system was estimated between 85 to 90% under the 100% load condition, of which trend appears higher in summer due to the less thermal loss than in winter. Power generation efficiency and thermal efficiency was measured in a range of 31~33% and 54~57%, respectively.

• 한국진공학회지
• /
• 제21권4호
• /
• pp.199-204
• /
• 2012

$SF_6$ 가스는 반도체 및 디스플레이 제조공정 중 건식식각 공정에서 널리 사용되는 가스이다. 하지만 $SF_6$ 가스는 대표적인 온실가스로서 지구 온난화에 큰 영향을 끼치기 때문에 반도체 및 디스플레이 공정에서 $SF_6$ 가스를 대체할 수 있는 가스의 연구가 필요한 상황이다. 그 후보군으로 떠오르고 있는 가스 중의 하나가 바로 $C_3F_6$ 가스이다. 이 가스를 이용하여 $Si_3N_4$ 박막을 건식식각 방법인 Reactive Ion Etching 공정을 수행하여 식각 특성에 관하여 연구하였으며, 흡착제 Zeolite 5A를 이용하여 식각공정 중 배출되는 가스 성분을 감소시켰다. Plasma Enhanced Chemical Vapor Deposition 장비를 이용하여 500 nm 두께의$Si_3N_4$ 박막을 증착하였으며, 노광 공정을 통해 패터닝을 한 후 Reactive Ion Etching 공정을 수행하였다. 그리고 Scanning Electron Microscope 장비를 이용하여 $Si_3N_4$ 박막의 식각된 단면과 식각율을 확인하였다. 또한 공정 후 흡착제 Zeolite 5A를 통과하기 전과 후에 배출되는 가스를 포집하여 Gas Chromatograph-Mass Spectrophotometry 장비를 이용하여 가스 성분을 측정 및 비교하였다.